mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-21 20:25:20 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,113 +1,113 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Creality CR-10 V3 0.6 nozzle",
|
||||
"inherits": "fdm_creality_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality CR-10 V3",
|
||||
"printer_structure": "i3",
|
||||
"default_print_profile": "0.20mm Standard @Creality CR10V3 0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printable_area": [
|
||||
"5x5",
|
||||
"305x5",
|
||||
"305x305",
|
||||
"5x305"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Creality",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Creality CR-10 V3 0.6 nozzle",
|
||||
"inherits": "fdm_creality_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Creality CR-10 V3",
|
||||
"printer_structure": "i3",
|
||||
"default_print_profile": "0.20mm Standard @Creality CR10V3 0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printable_area": [
|
||||
"5x5",
|
||||
"305x5",
|
||||
"305x305",
|
||||
"5x305"
|
||||
],
|
||||
"printable_height": "400",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Creality",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M0",
|
||||
"default_filament_profile": [
|
||||
"Creality Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 X2 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user