mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-28 05:12:27 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP084",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP084",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP050",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP050",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Fine @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP063",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,170 +1,170 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.06mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL A1",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP076",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL A1",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP076",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP049",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP049",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP139",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP139",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,92 +1,92 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP136",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP136",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP040",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP040",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,92 +1,92 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP043",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.08_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP043",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,168 +1,168 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP018",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"450",
|
||||
"450"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP018",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"450",
|
||||
"450"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"450",
|
||||
"450"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"450",
|
||||
"450"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP102",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP102",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP231",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_pattern": "gyroid"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP231",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_pattern": "gyroid"
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP232",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP232",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
|
||||
@@ -1,170 +1,170 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP100",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP100",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP204",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP204",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm nozzle, prioritizing print quality.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP205",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "1",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP205",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "1",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP099",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP099",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"210",
|
||||
"210"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP085",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP085",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP051",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP051",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Optimal @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP064",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,32 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,170 +1,170 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm High Quality @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP083",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP083",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP039",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP039",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP123",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP123",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP041",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP041",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP152",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP152",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP014",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP014",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,171 +1,171 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP153",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP153",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP140",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2D 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP140",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP042",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2DP 0.2 nozzle",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP042",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP233",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL H2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP233",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.2 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP206",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Balanced Quality @BBL P2S 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP206",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP086",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP086",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP052",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP052",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Draft @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP065",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL A1",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP077",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL A1",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP077",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP044",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP044",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,96 +1,96 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP142",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP142",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,96 +1,96 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP127",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_shell_layers": "9",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.12_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP127",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "7",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40",
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100",
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"top_shell_layers": "9",
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,168 +1,168 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP019",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"430",
|
||||
"430"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP019",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"430",
|
||||
"430"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"430",
|
||||
"430"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP002",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"430",
|
||||
"430"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP234",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP234",
|
||||
"instantiation": "true",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP104",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP104",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP207",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"smooth_coefficient": "1",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP207",
|
||||
"instantiation": "true",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"60",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"40",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"20",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"smooth_coefficient": "1",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_color_penetration_layers": "7",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP103",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP103",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP087",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL A1 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP087",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP053",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP053",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"16"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"28"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Extra Draft @BBL P1P 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP066",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2500",
|
||||
"2500"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.14mm Standard @BBL X1C 0.2 nozzle",
|
||||
"inherits": "fdm_process_single_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.2 nozzle",
|
||||
"Bambu Lab X1 0.2 nozzle",
|
||||
"Bambu Lab P1S 0.2 nozzle",
|
||||
"Bambu Lab X1E 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,81 +1,81 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Balanced Quality @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP174",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Balanced Quality @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP174",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,81 +1,81 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Balanced Quality @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP129",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Balanced Quality @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP129",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"180",
|
||||
"180",
|
||||
"180",
|
||||
"180"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP110",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP110",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"4000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,41 +1,41 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP109",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP109",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": [
|
||||
"3000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"gap_infill_speed": [
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP235",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP235",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP108",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP108",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP208",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP208",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP107",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP107",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL A1",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP078",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL A1",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP078",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP045",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP045",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,168 +1,168 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP020",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"330",
|
||||
"330"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL P1P",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP020",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"330",
|
||||
"330"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"330",
|
||||
"330"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"330",
|
||||
"330"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP143",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP143",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP128",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.16_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP128",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,172 +1,172 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP236",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP236",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP209",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP209",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.16mm layer height, prioritizing speed.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,86 +1,86 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2D 0.6 nozzle",
|
||||
"inherits": "fdm_process_dual_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP137",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2D 0.6 nozzle",
|
||||
"inherits": "fdm_process_dual_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP137",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,86 +1,86 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2DP 0.6 nozzle",
|
||||
"inherits": "fdm_process_dual_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP133",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2DP 0.6 nozzle",
|
||||
"inherits": "fdm_process_dual_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP133",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250",
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300",
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105",
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2S 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP237",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.6 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL H2S 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP237",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"350"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.6 nozzle"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1"
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL P2S 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP210",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Balanced Quality @BBL P2S 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP210",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL A1 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP088",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL A1 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP088",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL A1M 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP062",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL A1M 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP062",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,169 +1,169 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL P1P 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP072",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @BBL P1P 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP072",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P1P 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @BBL X1C 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Standard @BBL X1C 0.6 nozzle",
|
||||
"inherits": "fdm_process_single_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"bridge_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"35",
|
||||
"35"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"smooth_coefficient": "150",
|
||||
"sparse_infill_speed": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,76 +1,76 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Balanced Strength @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP173",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_shell_layers": "4",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Balanced Strength @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP173",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_shell_layers": "4",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,76 +1,76 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Balanced Strength @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP131",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_shell_layers": "4",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Balanced Strength @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP131",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_shell_layers": "4",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000",
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60",
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000",
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30",
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10",
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_shell_layers": "6",
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150",
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,173 +1,173 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP238",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_pattern": "gyroid"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm High Quality @BBL H2S",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP238",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2S 0.4 nozzle"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"prime_tower_flat_ironing": "1",
|
||||
"sparse_infill_pattern": "gyroid"
|
||||
}
|
||||
|
||||
@@ -1,174 +1,174 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP211",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm High Quality @BBL P2S",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP211",
|
||||
"instantiation": "true",
|
||||
"description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"default_acceleration": [
|
||||
"4000",
|
||||
"4000"
|
||||
],
|
||||
"enable_overhang_speed": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"enable_height_slowdown": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"gap_infill_speed": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"initial_layer_infill_speed": [
|
||||
"105",
|
||||
"105"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"initial_layer_acceleration": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"inner_wall_acceleration": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"initial_layer_travel_acceleration": [
|
||||
"6000",
|
||||
"6000"
|
||||
],
|
||||
"outer_wall_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_2_4_speed": [
|
||||
"30",
|
||||
"30"
|
||||
],
|
||||
"overhang_3_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_1_4_speed": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"overhang_4_4_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"overhang_totally_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"print_extruder_id": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"print_extruder_variant": [
|
||||
"Direct Drive Standard",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"sparse_infill_speed": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"smooth_coefficient": "4",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"slowdown_start_height": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"slowdown_start_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_start_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"slowdown_end_height": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"slowdown_end_speed": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"slowdown_end_acc": [
|
||||
"100000",
|
||||
"100000"
|
||||
],
|
||||
"small_perimeter_speed": [
|
||||
"50%",
|
||||
"50%"
|
||||
],
|
||||
"small_perimeter_threshold": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"sparse_infill_acceleration": [
|
||||
"100%",
|
||||
"100%"
|
||||
],
|
||||
"support_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"support_interface_speed": [
|
||||
"80",
|
||||
"80"
|
||||
],
|
||||
"top_surface_speed": [
|
||||
"150",
|
||||
"150"
|
||||
],
|
||||
"top_surface_pattern": "monotonic",
|
||||
"travel_speed": [
|
||||
"600",
|
||||
"600"
|
||||
],
|
||||
"top_surface_acceleration": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"travel_speed_z": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_acceleration": [
|
||||
"10000",
|
||||
"10000"
|
||||
],
|
||||
"vertical_shell_speed": [
|
||||
"80%",
|
||||
"80%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab P2S 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL A1",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP079",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL A1",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP079",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP000",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL A1M",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP000",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"default_acceleration": [
|
||||
"6000"
|
||||
],
|
||||
"elefant_foot_compensation": "0",
|
||||
"travel_speed": [
|
||||
"700"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,56 +1,56 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP124",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.4mm nozzle, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"600",
|
||||
"250",
|
||||
"600"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"600",
|
||||
"300",
|
||||
"600"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"500",
|
||||
"200",
|
||||
"500"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL H2D",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP124",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.4mm nozzle, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"600",
|
||||
"250",
|
||||
"600"
|
||||
],
|
||||
"inner_wall_speed": [
|
||||
"300",
|
||||
"600",
|
||||
"300",
|
||||
"600"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"500",
|
||||
"200",
|
||||
"500"
|
||||
],
|
||||
"prime_tower_brim_width": "-1",
|
||||
"prime_tower_width": "60",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,50 +1,50 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP130",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.4mm nozzle, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL H2DP",
|
||||
"inherits": "fdm_process_dual_0.20_nozzle_0.4",
|
||||
"from": "system",
|
||||
"setting_id": "GP130",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for 0.4mm nozzle, prioritizing speed.",
|
||||
"default_acceleration": [
|
||||
"8000",
|
||||
"8000",
|
||||
"8000",
|
||||
"8000"
|
||||
],
|
||||
"initial_layer_speed": [
|
||||
"50",
|
||||
"50",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"internal_solid_infill_speed": [
|
||||
"250",
|
||||
"300",
|
||||
"250",
|
||||
"300"
|
||||
],
|
||||
"outer_wall_speed": [
|
||||
"200",
|
||||
"200",
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"prime_tower_width": "60",
|
||||
"prime_tower_brim_width": "-1",
|
||||
"sparse_infill_speed": [
|
||||
"350",
|
||||
"600",
|
||||
"350",
|
||||
"600"
|
||||
],
|
||||
"travel_speed": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab H2D Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user