mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-21 12:15:21 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,114 +1,114 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Vyper 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Anycubic Vyper",
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Vyper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Anycubic",
|
||||
"retraction_minimum_travel": [
|
||||
"1.5"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG0 Z0.2 F1800 ; move nozzle to print position\nG92 E0 ; specify current extruder position as zero\nG1 Y10 X180 E50 F1200 ; extrude a line in front of the printer\nG92 E0 ; specify current extruder position as zero\nG0 Z20 F6000 ; move head up\nG1 E-7 F2400 ; retract\nG04 S2 ; wait 2s\nG0 X0 F6000 ; wipe from oozed filament\nG1 E-1 F2400 ; undo some of the retraction to avoid oozing\nG1 F6000 ; set travel speed to move to start printing point\nM117",
|
||||
"machine_end_gcode": "G4 ; wait\nG92 E0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} ; move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Anycubic Vyper 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Anycubic Vyper",
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Vyper",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "265",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printer_settings_id": "Anycubic",
|
||||
"retraction_minimum_travel": [
|
||||
"1.5"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"3"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG0 Z0.2 F1800 ; move nozzle to print position\nG92 E0 ; specify current extruder position as zero\nG1 Y10 X180 E50 F1200 ; extrude a line in front of the printer\nG92 E0 ; specify current extruder position as zero\nG0 Z20 F6000 ; move head up\nG1 E-7 F2400 ; retract\nG04 S2 ; wait 2s\nG0 X0 F6000 ; wipe from oozed filament\nG1 E-1 F2400 ; undo some of the retraction to avoid oozing\nG1 F6000 ; set travel speed to move to start printing point\nM117",
|
||||
"machine_end_gcode": "G4 ; wait\nG92 E0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} ; move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user