mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-21 12:15:21 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,118 +1,118 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Chiron 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Anycubic Chiron",
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Chiron",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"400x0",
|
||||
"400x400",
|
||||
"0x400"
|
||||
],
|
||||
"printable_height": "450",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"4.5",
|
||||
"4.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printer_settings_id": "Anycubic",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107 ;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single]; set wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z15.0 F3600 ;move the platform down 15mm\nG92 E0;zero the extruded length\nG1 F200 E40;extrude 40mm of feed stock\nG92 E0;zero the extruded length again\nG1 F3600",
|
||||
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91;relative positioning\nG1 E-4 F300;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X-10 F3000; get the head off the bed\nG1 F3000 Y400;kick the bed out\nM84;steppers off",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Anycubic Chiron 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Anycubic Chiron",
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Chiron",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"400x0",
|
||||
"400x400",
|
||||
"0x400"
|
||||
],
|
||||
"printable_height": "450",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"960"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"4.5",
|
||||
"4.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printer_settings_id": "Anycubic",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M601",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107 ;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single]; set wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z15.0 F3600 ;move the platform down 15mm\nG92 E0;zero the extruded length\nG1 F200 E40;extrude 40mm of feed stock\nG92 E0;zero the extruded length again\nG1 F3600",
|
||||
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91;relative positioning\nG1 E-4 F300;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X-10 F3000; get the head off the bed\nG1 F3000 Y400;kick the bed out\nM84;steppers off",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0"
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user