juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-19 19:33:47 +00:00
Code Issues Packages Projects Releases Wiki Activity

Reduce size by Json Fromatting (#13163)

Browse Source 
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.

| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |

Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.

> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
2026-04-15 11:58:12 -03:00
committed by GitHub
parent f7ef8a14bd
commit 16727644bb
10101 changed files with 1871226 additions and 1860967 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
View File

@@ -1,29 +1,29 @@
{
"type": "machine",
"name": "Anycubic 4Max Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Anycubic 4Max Pro",
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"270x0",
"270x205",
"0x205"
],
"printable_height": "200",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
"machine_end_gcode": "PRINT_END",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0"
}
"type": "machine",
"name": "Anycubic 4Max Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Anycubic 4Max Pro",
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"0x0",
"270x0",
"270x205",
"0x205"
],
"printable_height": "200",
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n; You can use following code instead if your PRINT_START macro support Chamber and print area bedmesh\n; PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single] Chamber=[chamber_temperature] PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]}",
"machine_end_gcode": "PRINT_END",
"layer_change_gcode": "",
"scan_first_layer": "0",
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0"
}

222
resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2 0.4 nozzle.json
View File

@@ -1,112 +1,112 @@
{
"type": "machine",
"name": "Anycubic 4Max Pro 2 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic 4Max Pro 2",
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"270x0",
"270x210",
"0x210"
],
"printable_height": "190",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1500"
],
"machine_max_acceleration_x": [
"900",
"900"
],
"machine_max_acceleration_y": [
"900",
"900"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"6",
"6"
],
"machine_max_jerk_y": [
"6",
"6"
],
"machine_max_jerk_z": [
"0.2",
"0.2"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retract_length_toolchange": [
"10"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"25"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic 4Max Pro 2 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic 4Max Pro 2",
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"270x0",
"270x210",
"0x210"
],
"printable_height": "190",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1500"
],
"machine_max_acceleration_x": [
"900",
"900"
],
"machine_max_acceleration_y": [
"900",
"900"
],
"machine_max_acceleration_z": [
"100",
"100"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"6",
"6"
],
"machine_max_jerk_y": [
"6",
"6"
],
"machine_max_jerk_z": [
"0.2",
"0.2"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.07"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2.5"
],
"retract_length_toolchange": [
"10"
],
"retraction_speed": [
"35"
],
"deretraction_speed": [
"25"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic 4Max Pro 2.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic 4Max Pro 2",
"model_id": "Anycubic-4Max-Pro-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_4maxpro2_buildplate_model.stl",
"bed_texture": "anycubic_4maxpro2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic 4Max Pro 2",
"model_id": "Anycubic-4Max-Pro-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_4maxpro2_buildplate_model.stl",
"bed_texture": "anycubic_4maxpro2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

22
resources/profiles/Anycubic/machine/Anycubic 4Max Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic 4Max Pro",
"model_id": "AC-4maxpro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_4maxpro_buildplate_model.stl",
"bed_texture": "anycubic_4maxpro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic 4Max Pro",
"model_id": "AC-4maxpro",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_4maxpro_buildplate_model.stl",
"bed_texture": "anycubic_4maxpro_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

234
resources/profiles/Anycubic/machine/Anycubic Chiron 0.4 nozzle.json
View File

@@ -1,118 +1,118 @@
{
"type": "machine",
"name": "Anycubic Chiron 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Chiron",
"default_print_profile": "0.20mm Standard @Anycubic Chiron",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "450",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"1000",
"960"
],
"machine_max_acceleration_y": [
"1000",
"960"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"4.5",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.1"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107 ;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single]; set wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z15.0 F3600 ;move the platform down 15mm\nG92 E0;zero the extruded length\nG1 F200 E40;extrude 40mm of feed stock\nG92 E0;zero the extruded length again\nG1 F3600",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91;relative positioning\nG1 E-4 F300;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X-10 F3000; get the head off the bed\nG1 F3000 Y400;kick the bed out\nM84;steppers off",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic Chiron 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Chiron",
"default_print_profile": "0.20mm Standard @Anycubic Chiron",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "450",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1500",
"1250"
],
"machine_max_acceleration_x": [
"1000",
"960"
],
"machine_max_acceleration_y": [
"1000",
"960"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"120",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"4.5",
"4.5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.1"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"0"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107 ;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single]; set wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG1 Z15.0 F3600 ;move the platform down 15mm\nG92 E0;zero the extruded length\nG1 F200 E40;extrude 40mm of feed stock\nG92 E0;zero the extruded length again\nG1 F3600",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91;relative positioning\nG1 E-4 F300;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X-10 F3000; get the head off the bed\nG1 F3000 Y400;kick the bed out\nM84;steppers off",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Chiron.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Chiron",
"model_id": "Anycubic-Chiron",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_chiron_buildplate_model.stl",
"bed_texture": "anycubic_chiron_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Chiron",
"model_id": "Anycubic-Chiron",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_chiron_buildplate_model.stl",
"bed_texture": "anycubic_chiron_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

226
resources/profiles/Anycubic/machine/Anycubic Kobra 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Anycubic Kobra 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra",
"default_print_profile": "0.20mm Standard @Anycubic Kobra",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"700",
"700"
],
"machine_max_acceleration_y": [
"600",
"600"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"250",
"250"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"0.6",
"0.6"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"60%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"50"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F{travel_speed*60} ; move print head up\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1 X0{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} E-34.0 F{travel_speed*60} ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F{travel_speed*60} ; park print head\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic Kobra 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra",
"default_print_profile": "0.20mm Standard @Anycubic Kobra",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1000",
"1000"
],
"machine_max_acceleration_retracting": [
"1000",
"1000"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"700",
"700"
],
"machine_max_acceleration_y": [
"600",
"600"
],
"machine_max_acceleration_z": [
"50",
"50"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"250",
"250"
],
"machine_max_speed_z": [
"20",
"20"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"0.6",
"0.6"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.05"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"60%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"50"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F{travel_speed*60} ; move print head up\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1 X0{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} E-34.0 F{travel_speed*60} ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F{travel_speed*60} ; park print head\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

224
resources/profiles/Anycubic/machine/Anycubic Kobra 2 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Anycubic Kobra 2 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra 2",
"default_print_profile": "0.20mm Standard @Anycubic Kobra2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"3000",
"1250"
],
"machine_max_acceleration_x": [
"2500",
"2500"
],
"machine_max_acceleration_y": [
"2500",
"2500"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"250",
"250"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"15",
"15"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.04"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"80"
],
"deretraction_speed": [
"80"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ;Use absolute coordinates\nM83 ;Extruder relative mode\nM104 S[first_layer_temperature] ;Set extruder temp\nM140 S[first_layer_bed_temperature] ;Set bed temp\nM190 S[first_layer_bed_temperature] ;Wait for bed temp\nM109 S[first_layer_temperature] ;Wait for extruder temp\nG28 ;Move X/Y/Z to min endstops\nG1 Z0.28 ;Lift nozzle a bit\nG92 E0 ;Specify current extruder position as zero\nG1 Y3 F1800 ;Move Y to purge point\nG1 X60 E25 F500 ;Extrude 25mm of filament in a 5cm line\nG92 E0 ;Zero the extruded length again\nG1 E-2 F500 ;Retract a little\nG1 X70 F4000 ;Quickly wipe away from the filament line\nM117",
"machine_end_gcode": "M104 S0 ;Extruder off\nM140 S0 ;Heatbed off\nM107 ;Fan off\nG91 ;Relative positioning\nG1 E-5 F3000 ;Retract filament\nG1 Z+0.3 F3000 ;Lift print head\nG28 X0 F3000 ;Home X axis\nM84 ;Disable stepper motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n[layer_num] @ [layer_z]mm\nG92 E0",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n[layer_num] @ [layer_z]mm",
"scan_first_layer": "0"
"type": "machine",
"name": "Anycubic Kobra 2 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra 2",
"default_print_profile": "0.20mm Standard @Anycubic Kobra2",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"2500",
"2500"
],
"machine_max_acceleration_retracting": [
"2500",
"2500"
],
"machine_max_acceleration_travel": [
"3000",
"1250"
],
"machine_max_acceleration_x": [
"2500",
"2500"
],
"machine_max_acceleration_y": [
"2500",
"2500"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"250",
"250"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"15",
"15"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.04"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"2"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"80"
],
"deretraction_speed": [
"80"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ;Use absolute coordinates\nM83 ;Extruder relative mode\nM104 S[first_layer_temperature] ;Set extruder temp\nM140 S[first_layer_bed_temperature] ;Set bed temp\nM190 S[first_layer_bed_temperature] ;Wait for bed temp\nM109 S[first_layer_temperature] ;Wait for extruder temp\nG28 ;Move X/Y/Z to min endstops\nG1 Z0.28 ;Lift nozzle a bit\nG92 E0 ;Specify current extruder position as zero\nG1 Y3 F1800 ;Move Y to purge point\nG1 X60 E25 F500 ;Extrude 25mm of filament in a 5cm line\nG92 E0 ;Zero the extruded length again\nG1 E-2 F500 ;Retract a little\nG1 X70 F4000 ;Quickly wipe away from the filament line\nM117",
"machine_end_gcode": "M104 S0 ;Extruder off\nM140 S0 ;Heatbed off\nM107 ;Fan off\nG91 ;Relative positioning\nG1 E-5 F3000 ;Retract filament\nG1 Z+0.3 F3000 ;Lift print head\nG28 X0 F3000 ;Home X axis\nM84 ;Disable stepper motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n[layer_num] @ [layer_z]mm\nG92 E0",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n[layer_num] @ [layer_z]mm",
"scan_first_layer": "0"
}

446
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json
View File

@@ -1,224 +1,224 @@
{
"type": "machine",
"name": "Anycubic Kobra 2 Max 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Max 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Max",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84; disable motors ; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit \nG92 E0 \nG1 Y3 F2400 ; zero the extruded length \nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F3000 ; Retract a little \nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117\nM900 K0.07",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 2 Max 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Max 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Max",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"420x0",
"420x420",
"0x420"
],
"printable_height": "500",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84; disable motors ; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit \nG92 E0 \nG1 Y3 F2400 ; zero the extruded length \nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F3000 ; Retract a little \nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117\nM900 K0.07",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 2 Max",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Max",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Max_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Max_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Max 0.4 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra 2 Max",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Max",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Max_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Max_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Max 0.4 nozzle"
}

454
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json
View File

@@ -1,228 +1,228 @@
{
"type": "machine",
"name": "Anycubic Kobra 2 Neo 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM005",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Neo 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Neo",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "marlin2",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M140 S0; Heatbed off\nM107; Fan off \nG91; relative positioning \nM83 ; extruder relative mode\nG1 E-3 F3000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 F3000 ;move Z up a bit and retract filament even more\nM104 S0; Extruder off\nG28 X Y;move X/Y to min endstops, so the head is out of the way\nG90; absolute positioning \nG1 Y220 F3000\nM84 ;steppers off\nM300 S1318 P266",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"2000",
"2000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28; move X/Y/Z to min endstops\nM420 S1\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3; lift nozzle a bit\nG92 E0 ; zero after lift\nG1 X10 Y5 F1800 ; move to purge line start position\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-4.5 F4000 ; Retract a little \nG92 E0 ; zero the extruded length again\nG1 X120 F4000 ; Quickly wipe away from the filament line\nM117 Printing... ; Display status message",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"2.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"100"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 2 Neo 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM005",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Neo 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Neo",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "marlin2",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M140 S0; Heatbed off\nM107; Fan off \nG91; relative positioning \nM83 ; extruder relative mode\nG1 E-3 F3000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 F3000 ;move Z up a bit and retract filament even more\nM104 S0; Extruder off\nG28 X Y;move X/Y to min endstops, so the head is out of the way\nG90; absolute positioning \nG1 Y220 F3000\nM84 ;steppers off\nM300 S1318 P266",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"2000",
"2000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28; move X/Y/Z to min endstops\nM420 S1\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3; lift nozzle a bit\nG92 E0 ; zero after lift\nG1 X10 Y5 F1800 ; move to purge line start position\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-4.5 F4000 ; Retract a little \nG92 E0 ; zero the extruded length again\nG1 X120 F4000 ; Quickly wipe away from the filament line\nM117 Printing... ; Display status message",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"2.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"100"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 2 Neo",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Neo",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Neo_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Neo_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra 2 Neo",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Neo",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Neo_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Neo_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
}

460
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json
View File

@@ -1,231 +1,231 @@
{
"type": "machine",
"name": "Anycubic Kobra 2 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM004",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Plus 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Plus",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84; disable motors ; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit\nG92 E0\nG1 Y3 F2400 ; zero the extruded length\nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line.\nG92 E0 ; zero the extruded length again\nG1 E-2 F3000 ; Retract a little\nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 2 Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM004",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Plus 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Plus",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"320x0",
"320x320",
"0x320"
],
"printable_height": "400",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84; disable motors ; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"10000",
"10000"
],
"machine_max_acceleration_retracting": [
"10000",
"10000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; move X/Y/Z to min endstops\nG1 Z0.28 ; lift nozzle a bit\nG92 E0\nG1 Y3 F2400 ; zero the extruded length\nG1 X180 E40 F500 ; Extrude 25mm of filament in a 5cm line.\nG92 E0 ; zero the extruded length again\nG1 E-2 F3000 ; Retract a little\nG1 X181 F4000 ; Quickly wipe away from the filament line\nM117",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 2 Plus",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Plus",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Plus_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Plus_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Plus 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Plus 0.4 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra 2 Plus",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Plus",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Plus_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Plus_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Plus 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Plus 0.4 nozzle"
}

456
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json
View File

@@ -1,229 +1,229 @@
{
"type": "machine",
"name": "Anycubic Kobra 2 Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM002",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Pro 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Pro",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ;Use absolute coordinates\nM83 ;Extruder relative mode\nM140 S[first_layer_bed_temperature] ;Set bed temp\nM190 S[first_layer_bed_temperature] ;Wait for bed temp\nM104 S[first_layer_temperature] ;Set extruder temp\nM109 S[first_layer_temperature] ;Wait for extruder temp\nG28 ;Move X/Y/Z to min endstops\nG1 Z0.28 ;Lift nozzle a bit\nG92 E0 ;Specify current extruder position as zero\nG1 Y226 F1800 ;Move Y to purge point\nG1 X180 E25 F500 ;Extrude 25mm of filament in a 5cm line\nG92 E0 ;Zero the extruded length again\nG1 E-0.2 F500 ;Retract a little\nG1 X181 F4000 ;Quickly wipe away from the filament line\nM117\nM900 K0.07",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 2 Pro 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM002",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 2 Pro 0.4 nozzle",
"printer_model": "Anycubic Kobra 2 Pro",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": "",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "256",
"extruder_clearance_height_to_rod": "25",
"extruder_clearance_radius": "73",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [
"226x224",
"256x224",
"256x256",
"226x256"
],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.95} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM84; disable stepper motors",
"machine_load_filament_time": "25",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
],
"machine_max_acceleration_x": [
"20000",
"20000"
],
"machine_max_acceleration_y": [
"20000",
"20000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"20",
"20"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"8",
"8"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"16",
"16"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G90 ;Use absolute coordinates\nM83 ;Extruder relative mode\nM140 S[first_layer_bed_temperature] ;Set bed temp\nM190 S[first_layer_bed_temperature] ;Wait for bed temp\nM104 S[first_layer_temperature] ;Set extruder temp\nM109 S[first_layer_temperature] ;Wait for extruder temp\nG28 ;Move X/Y/Z to min endstops\nG1 Z0.28 ;Lift nozzle a bit\nG92 E0 ;Specify current extruder position as zero\nG1 Y226 F1800 ;Move Y to purge point\nG1 X180 E25 F500 ;Extrude 25mm of filament in a 5cm line\nG92 E0 ;Zero the extruded length again\nG1 E-0.2 F500 ;Retract a little\nG1 X181 F4000 ;Quickly wipe away from the filament line\nM117\nM900 K0.07",
"machine_unload_filament_time": "29",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "117",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"2"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"255"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "0",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 2 Pro",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Pro",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Pro_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Pro_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Pro 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Pro 0.4 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra 2 Pro",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 2 Pro",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra 2 Pro_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 2 Pro_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Pro 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Pro 0.4 nozzle"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 2.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 2",
"model_id": "Anycubic-Kobra-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobra2_buildplate_model.stl",
"bed_texture": "anycubic_kobra2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Kobra 2",
"model_id": "Anycubic-Kobra-2",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobra2_buildplate_model.stl",
"bed_texture": "anycubic_kobra2_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

468
resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json
View File

@@ -1,235 +1,235 @@
{
"type": "machine",
"name": "Anycubic Kobra 3 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.2 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"default_print_profile": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.2 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"40"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"0"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 3 0.2 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.2 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.2",
"nozzle_diameter": [
"0.2"
],
"default_print_profile": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.2 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"40"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.14"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"0"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

472
resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json
View File

@@ -1,237 +1,237 @@
{
"type": "machine",
"name": "Anycubic Kobra 3 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.4 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"60"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"259.6"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 3 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.4 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"60"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"259.6"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"60"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

468
resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json
View File

@@ -1,235 +1,235 @@
{
"type": "machine",
"name": "Anycubic Kobra 3 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.6 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 0.6 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.6 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"259"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 3 0.6 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.6 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.6",
"nozzle_diameter": [
"0.6"
],
"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 0.6 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.6 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"30"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "200",
"extruder_clearance_height_to_rod": "30",
"extruder_clearance_radius": "130",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.42"
],
"min_layer_height": [
"0.12"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0"
],
"retract_lift_below": [
"259"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"30"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

468
resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json
View File

@@ -1,235 +1,235 @@
{
"type": "machine",
"name": "Anycubic Kobra 3 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.8 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 0.8 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"259.6"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}
"type": "machine",
"name": "Anycubic Kobra 3 0.8 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra 3 0.8 nozzle",
"printer_model": "Anycubic Kobra 3",
"printer_variant": "0.8",
"nozzle_diameter": [
"0.8"
],
"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 0.8 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"255x0",
"255x255",
"0x255"
],
"printable_height": "260",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0",
"255x0",
"255x255",
"0x255",
"0x0",
"2x2",
"2x253",
"253x253",
"253x2",
"2x2"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable stepper motors",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"20000",
"20000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"20000",
"20000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"15000",
"15000"
],
"machine_max_acceleration_y": [
"15000",
"15000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_y": [
"20",
"20"
],
"machine_max_jerk_z": [
"5",
"5"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.56"
],
"min_layer_height": [
"0.16"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "58.7795",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"259.6"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"1"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"2"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra 3.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra 3",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 3",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"bed_model": "Anycubic Kobra 3_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 3_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra 3",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra 3",
"nozzle_diameter": "0.2;0.4;0.6;0.8",
"bed_model": "Anycubic Kobra 3_buildplate_model.stl",
"bed_texture": "Anycubic Kobra 3_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle"
}

234
resources/profiles/Anycubic/machine/Anycubic Kobra Max 0.4 nozzle.json
View File

@@ -1,118 +1,118 @@
{
"type": "machine",
"name": "Anycubic Kobra Max 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra Max",
"default_print_profile": "0.20mm Standard @Anycubic KobraMax",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "450",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"3000",
"5000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"4000",
"1250"
],
"machine_max_acceleration_x": [
"700",
"960"
],
"machine_max_acceleration_y": [
"600",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"40",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"20",
"8"
],
"machine_max_jerk_y": [
"20",
"8"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"5"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single] ; set wait for bed temp\nM355 S1;turn on the case light\nM109 S[nozzle_temperature_initial_layer]; wait for extruder temp\nG1 Z15.0 F1000 ;move the nozzle up 15mm\nG92 E0;zero the extruded length\nG1 F100 E60;extrude 60mm of feed stock\nG92 E0;zero the extruded length again",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0;heated bed heater off (if you have it)\nG91;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X10 F3000; get the head off the bed\nG1 F3000 Y400 ;kick the bed out\nM84;steppers off\nM355 S0;turn off the case light",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic Kobra Max 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra Max",
"default_print_profile": "0.20mm Standard @Anycubic KobraMax",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"400x0",
"400x400",
"0x400"
],
"printable_height": "450",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"3000",
"5000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"4000",
"1250"
],
"machine_max_acceleration_x": [
"700",
"960"
],
"machine_max_acceleration_y": [
"600",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"40",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"20",
"8"
],
"machine_max_jerk_y": [
"20",
"8"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"5"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single] ; set wait for bed temp\nM355 S1;turn on the case light\nM109 S[nozzle_temperature_initial_layer]; wait for extruder temp\nG1 Z15.0 F1000 ;move the nozzle up 15mm\nG92 E0;zero the extruded length\nG1 F100 E60;extrude 60mm of feed stock\nG92 E0;zero the extruded length again",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0;heated bed heater off (if you have it)\nG91;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X10 F3000; get the head off the bed\nG1 F3000 Y400 ;kick the bed out\nM84;steppers off\nM355 S0;turn off the case light",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra Max.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra Max",
"model_id": "Anycubic-Kobra-Max",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobramax_buildplate_model.stl",
"bed_texture": "anycubic_kobramax_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Kobra Max",
"model_id": "Anycubic-Kobra-Max",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobramax_buildplate_model.stl",
"bed_texture": "anycubic_kobramax_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

452
resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json
View File

@@ -1,228 +1,228 @@
{
"type": "machine",
"name": "Anycubic Kobra Neo 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM005_kobra_neo",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra Neo 0.4 nozzle",
"printer_model": "Anycubic Kobra Neo",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"disable_m73": "1",
"gcode_flavor": "marlin2",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M140 S0 ; heatbed off\nM107 ; fan off\nG91 ; relative positioning\nM83 ; extruder relative mode\nG1 E-3 F3000 ; retract\nG1 Z+0.5 F3000 ; lift nozzle\nM104 S0 ; extruder off\nG28 X Y ; home X/Y\nG90 ; absolute positioning\nG1 Y220 F3000\nM84 ; steppers off\nM300 S1318 P266",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"2000",
"2000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all axes\nG29 ; auto bed leveling\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3 ; lower nozzle\nG92 E0 ; zero extruded length\nG1 X10 Y5 F1800 ; move to purge line start\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; purge line\nG92 E0 ; zero extruded length\nG1 E-4.5 F4000 ; retract\nG92 E0 ; zero extruded length\nG1 X120 F4000 ; wipe\nM117 Printing...",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"2.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"100"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
"type": "machine",
"name": "Anycubic Kobra Neo 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM005_kobra_neo",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra Neo 0.4 nozzle",
"printer_model": "Anycubic Kobra Neo",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"disable_m73": "1",
"gcode_flavor": "marlin2",
"printable_area": [
"0x0",
"220x0",
"220x220",
"0x220"
],
"printable_height": "250",
"thumbnails": [
"230x110"
],
"thumbnails_format": "PNG",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [
"0x0"
],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "20",
"extruder_clearance_radius": "20",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "M140 S0 ; heatbed off\nM107 ; fan off\nG91 ; relative positioning\nM83 ; extruder relative mode\nG1 E-3 F3000 ; retract\nG1 Z+0.5 F3000 ; lift nozzle\nM104 S0 ; extruder off\nG28 X Y ; home X/Y\nG90 ; absolute positioning\nG1 Y220 F3000\nM84 ; steppers off\nM300 S1318 P266",
"machine_load_filament_time": "42",
"machine_max_acceleration_e": [
"2000",
"2000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"2000",
"2000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"800",
"800"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"2",
"2"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"300",
"300"
],
"machine_max_speed_y": [
"300",
"300"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all axes\nG29 ; auto bed leveling\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3 ; lower nozzle\nG92 E0 ; zero extruded length\nG1 X10 Y5 F1800 ; move to purge line start\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; purge line\nG92 E0 ; zero extruded length\nG1 E-4.5 F4000 ; retract\nG92 E0 ; zero extruded length\nG1 X120 F4000 ; wipe\nM117 Printing...",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "i3",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"70%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"258"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"2.5"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"100"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0"
],
"z_hop_types": [
"Auto Lift"
],
"z_offset": "0"
}

20
resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra Neo",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra Neo",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra Neo_buildplate_model.stl",
"bed_texture": "Anycubic Kobra Neo_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic PLA"
"type": "machine_model",
"name": "Anycubic Kobra Neo",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra Neo",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra Neo_buildplate_model.stl",
"bed_texture": "Anycubic Kobra Neo_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic PLA"
}

234
resources/profiles/Anycubic/machine/Anycubic Kobra Plus 0.4 nozzle.json
View File

@@ -1,118 +1,118 @@
{
"type": "machine",
"name": "Anycubic Kobra Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra Plus",
"default_print_profile": "0.20mm Standard @Anycubic KobraPlus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"3000",
"5000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"4000",
"1250"
],
"machine_max_acceleration_x": [
"700",
"960"
],
"machine_max_acceleration_y": [
"600",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"40",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"20",
"8"
],
"machine_max_jerk_y": [
"20",
"8"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"5"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single] ; set wait for bed temp\nM355 S1;turn on the case light\nM109 S[nozzle_temperature_initial_layer]; wait for extruder temp\nG1 Z15.0 F1000 ;move the nozzle up 15mm\nG92 E0;zero the extruded length\nG1 F100 E60;extrude 60mm of feed stock\nG92 E0;zero the extruded length again",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0;heated bed heater off (if you have it)\nG91;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X10 F3000; get the head off the bed\nG1 F3000 Y400 ;kick the bed out\nM84;steppers off\nM355 S0;turn off the case light",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic Kobra Plus 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Kobra Plus",
"default_print_profile": "0.20mm Standard @Anycubic KobraPlus",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"300x0",
"300x300",
"0x300"
],
"printable_height": "350",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"3000",
"5000"
],
"machine_max_acceleration_extruding": [
"4000",
"1250"
],
"machine_max_acceleration_retracting": [
"1000",
"1250"
],
"machine_max_acceleration_travel": [
"4000",
"1250"
],
"machine_max_acceleration_x": [
"700",
"960"
],
"machine_max_acceleration_y": [
"600",
"960"
],
"machine_max_acceleration_z": [
"100",
"200"
],
"machine_max_speed_e": [
"60",
"120"
],
"machine_max_speed_x": [
"300",
"100"
],
"machine_max_speed_y": [
"300",
"100"
],
"machine_max_speed_z": [
"40",
"12"
],
"machine_max_jerk_e": [
"5",
"4.5"
],
"machine_max_jerk_x": [
"20",
"8"
],
"machine_max_jerk_y": [
"20",
"8"
],
"machine_max_jerk_z": [
"0.3",
"0.4"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.15"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"5"
],
"retract_before_wipe": [
"70%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"4"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "M104 S140;start the nozzle preheat and don't wait\nG21;metric values\nG90;absolute positioning\nM82;set extruder to absolute mode\nM107;start with the fan off\nG28;home all\nM190 S[bed_temperature_initial_layer_single] ; set wait for bed temp\nM355 S1;turn on the case light\nM109 S[nozzle_temperature_initial_layer]; wait for extruder temp\nG1 Z15.0 F1000 ;move the nozzle up 15mm\nG92 E0;zero the extruded length\nG1 F100 E60;extrude 60mm of feed stock\nG92 E0;zero the extruded length again",
"machine_end_gcode": "M104 S0;extruder heater off\nM140 S0;heated bed heater off (if you have it)\nG91;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90;absolute positioning\nG1 X10 F3000; get the head off the bed\nG1 F3000 Y400 ;kick the bed out\nM84;steppers off\nM355 S0;turn off the case light",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;G92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra Plus.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra Plus",
"model_id": "Anycubic-Kobra-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobraplus_buildplate_model.stl",
"bed_texture": "anycubic_kobraplus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Kobra Plus",
"model_id": "Anycubic-Kobra-Plus",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobraplus_buildplate_model.stl",
"bed_texture": "anycubic_kobraplus_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

458
resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json
View File

@@ -1,231 +1,231 @@
{
"type": "machine",
"name": "Anycubic Kobra S1 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra S1 0.4 nozzle",
"printer_model": "Anycubic Kobra S1",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra S1 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "250",
"thumbnails": "230x110/PNG",
"thumbnails_format": "PNG",
"thumbnails_internal": "512x512/PNG/top",
"thumbnails_internal_switch": "1",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G90\n;;; G1 Z{toolchange_z+2} F480\n;;; G1 X261 Y25 F12000\n;;; G1 Y1 F600\n;;; M400 P2730\n;;; G1 Y25 F3000\n;;; M400 P76250\n;;; M400 P35780\n; 2.1\n;;; G90\n;;; G1 Z{toolchange_z+2} F480\n;;; G1 X47 Y230 F12000\n;;; M400 P0\n; 2.2\n;;; G1 X47 Y276 F600\n;;; G1 X47 Y230 F12000\n;;; G1 X47 Y276 F600\n;;; G1 X47 Y230 F12000\n; 3.1\n;;; G1 F36000\n;;; G1 Y250\n;;; G1 F8000\n;;; G1 X81\n;;; G1 Y273\n; 3.2\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n; 3.3\n;;; G1 X72\n;;; G1 X77\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "240",
"extruder_clearance_height_to_rod": "48",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "G92 E0\nG1 E-2 F3000\n{if max_layer_z < max_print_height-1}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F900 ; Move print head further up{endif} \nG1 F12000; present print\nG1 X44; throw_position_x\nG1 Y270; throw_position_y\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors",
"machine_load_filament_time": "126.423",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"15",
"15"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "71.6",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "corexy",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"249"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"travel_slope": [
"3"
],
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Slope Lift"
],
"z_offset": "0"
"type": "machine",
"name": "Anycubic Kobra S1 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_technology": "FFF",
"printer_settings_id": "Anycubic Kobra S1 0.4 nozzle",
"printer_model": "Anycubic Kobra S1",
"printer_variant": "0.4",
"nozzle_diameter": [
"0.4"
],
"default_print_profile": "0.20mm Standard @Anycubic Kobra S1 0.4 nozzle",
"default_filament_profile": [
"Anycubic PLA @Anycubic Kobra S1 0.4 nozzle"
],
"disable_m73": "1",
"gcode_flavor": "klipper",
"printable_area": [
"0x0",
"250x0",
"250x250",
"0x250"
],
"printable_height": "250",
"thumbnails": "230x110/PNG",
"thumbnails_format": "PNG",
"thumbnails_internal": "512x512/PNG/top",
"thumbnails_internal_switch": "1",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_custom_model": "",
"bed_custom_texture": "",
"bed_exclude_area": [],
"bed_mesh_max": "0,0",
"bed_mesh_min": "0,0",
"bed_mesh_probe_distance": "0,0",
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"best_object_pos": "0.5,0.5",
"change_extrusion_role_gcode": "",
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G90\n;;; G1 Z{toolchange_z+2} F480\n;;; G1 X261 Y25 F12000\n;;; G1 Y1 F600\n;;; M400 P2730\n;;; G1 Y25 F3000\n;;; M400 P76250\n;;; M400 P35780\n; 2.1\n;;; G90\n;;; G1 Z{toolchange_z+2} F480\n;;; G1 X47 Y230 F12000\n;;; M400 P0\n; 2.2\n;;; G1 X47 Y276 F600\n;;; G1 X47 Y230 F12000\n;;; G1 X47 Y276 F600\n;;; G1 X47 Y230 F12000\n; 3.1\n;;; G1 F36000\n;;; G1 Y250\n;;; G1 F8000\n;;; G1 X81\n;;; G1 Y273\n; 3.2\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 F8000\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n;;; G1 X96\n;;; G1 X81\n; 3.3\n;;; G1 X72\n;;; G1 X77\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"deretraction_speed": [
"0"
],
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "240",
"extruder_clearance_height_to_rod": "48",
"extruder_clearance_radius": "60",
"extruder_colour": [
"#FF4D4F"
],
"extruder_offset": [
"0x0"
],
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"head_wrap_detect_zone": [],
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
"long_retractions_when_cut": [
"0"
],
"machine_end_gcode": "G92 E0\nG1 E-2 F3000\n{if max_layer_z < max_print_height-1}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F900 ; Move print head further up{endif} \nG1 F12000; present print\nG1 X44; throw_position_x\nG1 Y270; throw_position_y\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors",
"machine_load_filament_time": "126.423",
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"20000",
"20000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"20000",
"20000"
],
"machine_max_acceleration_x": [
"10000",
"10000"
],
"machine_max_acceleration_y": [
"10000",
"10000"
],
"machine_max_acceleration_z": [
"500",
"500"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"3",
"3"
],
"machine_max_speed_e": [
"80",
"80"
],
"machine_max_speed_x": [
"600",
"600"
],
"machine_max_speed_y": [
"600",
"600"
],
"machine_max_speed_z": [
"15",
"15"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"machine_pause_gcode": "M601",
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"max_layer_height": [
"0.28"
],
"min_layer_height": [
"0.08"
],
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "71.6",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"printer_notes": "",
"printer_structure": "corexy",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"printing_by_object_gcode": "",
"purge_in_prime_tower": "0",
"retract_before_wipe": [
"0%"
],
"retract_length_toolchange": [
"0"
],
"retract_lift_above": [
"0.3"
],
"retract_lift_below": [
"249"
],
"retract_lift_enforce": [
"All Surfaces"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retract_when_changing_layer": [
"1"
],
"retraction_distances_when_cut": [
"18"
],
"retraction_length": [
"0.8"
],
"retraction_minimum_travel": [
"1"
],
"retraction_speed": [
"40"
],
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "0",
"template_custom_gcode": "",
"time_cost": "0",
"time_lapse_gcode": "",
"travel_slope": [
"3"
],
"upward_compatible_machine": [],
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"wipe": [
"1"
],
"wipe_distance": [
"1"
],
"z_hop": [
"0.4"
],
"z_hop_types": [
"Slope Lift"
],
"z_offset": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra S1.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra S1",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra S1",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra S1_buildplate_model.stl",
"bed_texture": "Anycubic Kobra S1_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle"
}
"type": "machine_model",
"name": "Anycubic Kobra S1",
"machine_tech": "FFF",
"family": "Anycubic",
"model_id": "Anycubic Kobra S1",
"nozzle_diameter": "0.4",
"bed_model": "Anycubic Kobra S1_buildplate_model.stl",
"bed_texture": "Anycubic Kobra S1_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle"
}

22
resources/profiles/Anycubic/machine/Anycubic Kobra.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Kobra",
"model_id": "Anycubic-Kobra",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobra_buildplate_model.stl",
"bed_texture": "anycubic_kobra_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Kobra",
"model_id": "Anycubic-Kobra",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_kobra_buildplate_model.stl",
"bed_texture": "anycubic_kobra_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

194
resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json
View File

@@ -1,99 +1,99 @@
{
"type": "machine",
"name": "Anycubic Predator 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Anycubic Predator",
"default_print_profile": "0.20mm Standard @Anycubic Predator",
"gcode_flavor": "marlin",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"184.296x16.1238",
"182.189x32.1249",
"178.696x47.8815",
"173.843x63.2737",
"167.667x78.1844",
"160.215x92.5",
"151.543x106.112",
"141.718x118.916",
"130.815x130.815",
"118.916x141.718",
"106.112x151.543",
"92.5x160.215",
"78.1844x167.667",
"63.2737x173.843",
"47.8815x178.696",
"32.1249x182.189",
"16.1238x184.296",
"1.1328e-14x185",
"-16.1238x184.296",
"-32.1249x182.189",
"-47.8815x178.696",
"-63.2737x173.843",
"-78.1844x167.667",
"-92.5x160.215",
"-106.112x151.543",
"-118.916x141.718",
"-130.815x130.815",
"-141.718x118.916",
"-151.543x106.112",
"-160.215x92.5",
"-167.667x78.1844",
"-173.843x63.2737",
"-178.696x47.8815",
"-182.189x32.1249",
"-184.296x16.1238",
"-185x2.2656e-14",
"-184.296x-16.1238",
"-182.189x-32.1249",
"-178.696x-47.8815",
"-173.843x-63.2737",
"-167.667x-78.1844",
"-160.215x-92.5",
"-151.543x-106.112",
"-141.718x-118.916",
"-130.815x-130.815",
"-118.916x-141.718",
"-106.112x-151.543",
"-92.5x-160.215",
"-78.1844x-167.667",
"-63.2737x-173.843",
"-47.8815x-178.696",
"-32.1249x-182.189",
"-16.1238x-184.296",
"-3.39839e-14x-185",
"16.1238x-184.296",
"32.1249x-182.189",
"47.8815x-178.696",
"63.2737x-173.843",
"78.1844x-167.667",
"92.5x-160.215",
"106.112x-151.543",
"118.916x-141.718",
"130.815x-130.815",
"141.718x-118.916",
"151.543x-106.112",
"160.215x-92.5",
"167.667x-78.1844",
"173.843x-63.2737",
"178.696x-47.8815",
"182.189x-32.1249",
"184.296x-16.1238",
"185x-4.53119e-14"
],
"printable_height": "455",
"machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F300\nG1 Z+0.5 F6000\nG28 \nG90 ;absolute positioning",
"machine_start_gcode": "G21 ; use millimeters\nG90 ; absolute positioning\nM82 ; absolute extrusion\nM107 T0 ; turn off part cooling fan\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] T0 ; set nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed\nM109 S[nozzle_temperature_initial_layer] T0 ; wait for nozzle\n\nG28 ; home all\nG1 X0 Y0 Z5.0 F4000 ; jump to center\nG1 X-180 Y0 Z0.4 F2000 ; move to near bed edge\nG92 E0 ; reset the extruder\n\n; --- Prime line ---\nG1 E5 F300 ; initial prime\nG0 X-180.00 Y0.00 Z0.30 E0 F1000\nG1 X-179.385 Y-14.864 Z0.30 E3.57042\nG1 X-177.545 Y-29.627 Z0.30 E7.14094\nG1 X-174.492 Y-44.187 Z0.30 E10.71134\nG1 X-170.247 Y-58.446 Z0.30 E14.28195\nG1 X-164.839 Y-72.305 Z0.30 E17.85235\nG1 X-158.305 Y-85.671 Z0.30 E21.42298\nG1 X-150.690 Y-98.451 Z0.30 E24.99339\nG1 X-142.045 Y-110.558 Z0.30 E27.56379 ; gradually reducing extrusion\nG1 F1500 E26.56379 ; retract 1mm\nG1 Z0.5 F3000 ; lift Z slightly\nG92 E0 ; reset the extruder\n; --- End priming line ---",
"layer_change_gcode": "",
"machine_pause_gcode": "PAUSE",
"scan_first_layer": "0",
"nozzle_type": "brass",
"auxiliary_fan": "0"
"type": "machine",
"name": "Anycubic Predator 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM003",
"instantiation": "true",
"printer_model": "Anycubic Predator",
"default_print_profile": "0.20mm Standard @Anycubic Predator",
"gcode_flavor": "marlin",
"nozzle_diameter": [
"0.4"
],
"bed_exclude_area": [
"0x0"
],
"printable_area": [
"184.296x16.1238",
"182.189x32.1249",
"178.696x47.8815",
"173.843x63.2737",
"167.667x78.1844",
"160.215x92.5",
"151.543x106.112",
"141.718x118.916",
"130.815x130.815",
"118.916x141.718",
"106.112x151.543",
"92.5x160.215",
"78.1844x167.667",
"63.2737x173.843",
"47.8815x178.696",
"32.1249x182.189",
"16.1238x184.296",
"1.1328e-14x185",
"-16.1238x184.296",
"-32.1249x182.189",
"-47.8815x178.696",
"-63.2737x173.843",
"-78.1844x167.667",
"-92.5x160.215",
"-106.112x151.543",
"-118.916x141.718",
"-130.815x130.815",
"-141.718x118.916",
"-151.543x106.112",
"-160.215x92.5",
"-167.667x78.1844",
"-173.843x63.2737",
"-178.696x47.8815",
"-182.189x32.1249",
"-184.296x16.1238",
"-185x2.2656e-14",
"-184.296x-16.1238",
"-182.189x-32.1249",
"-178.696x-47.8815",
"-173.843x-63.2737",
"-167.667x-78.1844",
"-160.215x-92.5",
"-151.543x-106.112",
"-141.718x-118.916",
"-130.815x-130.815",
"-118.916x-141.718",
"-106.112x-151.543",
"-92.5x-160.215",
"-78.1844x-167.667",
"-63.2737x-173.843",
"-47.8815x-178.696",
"-32.1249x-182.189",
"-16.1238x-184.296",
"-3.39839e-14x-185",
"16.1238x-184.296",
"32.1249x-182.189",
"47.8815x-178.696",
"63.2737x-173.843",
"78.1844x-167.667",
"92.5x-160.215",
"106.112x-151.543",
"118.916x-141.718",
"130.815x-130.815",
"141.718x-118.916",
"151.543x-106.112",
"160.215x-92.5",
"167.667x-78.1844",
"173.843x-63.2737",
"178.696x-47.8815",
"182.189x-32.1249",
"184.296x-16.1238",
"185x-4.53119e-14"
],
"printable_height": "455",
"machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F300\nG1 Z+0.5 F6000\nG28 \nG90 ;absolute positioning",
"machine_start_gcode": "G21 ; use millimeters\nG90 ; absolute positioning\nM82 ; absolute extrusion\nM107 T0 ; turn off part cooling fan\n\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] T0 ; set nozzle temp\nM190 S[bed_temperature_initial_layer_single] ; wait for bed\nM109 S[nozzle_temperature_initial_layer] T0 ; wait for nozzle\n\nG28 ; home all\nG1 X0 Y0 Z5.0 F4000 ; jump to center\nG1 X-180 Y0 Z0.4 F2000 ; move to near bed edge\nG92 E0 ; reset the extruder\n\n; --- Prime line ---\nG1 E5 F300 ; initial prime\nG0 X-180.00 Y0.00 Z0.30 E0 F1000\nG1 X-179.385 Y-14.864 Z0.30 E3.57042\nG1 X-177.545 Y-29.627 Z0.30 E7.14094\nG1 X-174.492 Y-44.187 Z0.30 E10.71134\nG1 X-170.247 Y-58.446 Z0.30 E14.28195\nG1 X-164.839 Y-72.305 Z0.30 E17.85235\nG1 X-158.305 Y-85.671 Z0.30 E21.42298\nG1 X-150.690 Y-98.451 Z0.30 E24.99339\nG1 X-142.045 Y-110.558 Z0.30 E27.56379 ; gradually reducing extrusion\nG1 F1500 E26.56379 ; retract 1mm\nG1 Z0.5 F3000 ; lift Z slightly\nG92 E0 ; reset the extruder\n; --- End priming line ---",
"layer_change_gcode": "",
"machine_pause_gcode": "PAUSE",
"scan_first_layer": "0",
"nozzle_type": "brass",
"auxiliary_fan": "0"
}

20
resources/profiles/Anycubic/machine/Anycubic Predator.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Predator",
"model_id": "Anycubic_Predator",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "Anycubic Predator_buildplate_model.stl",
"bed_texture": "Anycubic Predator_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
"type": "machine_model",
"name": "Anycubic Predator",
"model_id": "Anycubic_Predator",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "Anycubic Predator_buildplate_model.stl",
"bed_texture": "Anycubic Predator_buildplate_texture.svg",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

226
resources/profiles/Anycubic/machine/Anycubic Vyper 0.4 nozzle.json
View File

@@ -1,114 +1,114 @@
{
"type": "machine",
"name": "Anycubic Vyper 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Vyper",
"default_print_profile": "0.20mm Standard @Anycubic Vyper",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"250x0",
"250x255",
"0x255"
],
"printable_height": "265",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"1000",
"1000"
],
"machine_max_acceleration_y": [
"1000",
"1000"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"3"
],
"retract_length_toolchange": [
"10"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG0 Z0.2 F1800 ; move nozzle to print position\nG92 E0 ; specify current extruder position as zero\nG1 Y10 X180 E50 F1200 ; extrude a line in front of the printer\nG92 E0 ; specify current extruder position as zero\nG0 Z20 F6000 ; move head up\nG1 E-7 F2400 ; retract\nG04 S2 ; wait 2s\nG0 X0 F6000 ; wipe from oozed filament\nG1 E-1 F2400 ; undo some of the retraction to avoid oozing\nG1 F6000 ; set travel speed to move to start printing point\nM117",
"machine_end_gcode": "G4 ; wait\nG92 E0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} ; move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic Vyper 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic Vyper",
"default_print_profile": "0.20mm Standard @Anycubic Vyper",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"250x0",
"250x255",
"0x255"
],
"printable_height": "265",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"1000",
"1000"
],
"machine_max_acceleration_y": [
"1000",
"1000"
],
"machine_max_acceleration_z": [
"200",
"200"
],
"machine_max_speed_e": [
"60",
"60"
],
"machine_max_speed_x": [
"200",
"200"
],
"machine_max_speed_y": [
"200",
"200"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"8",
"8"
],
"machine_max_jerk_y": [
"8",
"8"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.32"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"0%"
],
"retraction_length": [
"3"
],
"retract_length_toolchange": [
"10"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"40"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M601",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG0 Z0.2 F1800 ; move nozzle to print position\nG92 E0 ; specify current extruder position as zero\nG1 Y10 X180 E50 F1200 ; extrude a line in front of the printer\nG92 E0 ; specify current extruder position as zero\nG0 Z20 F6000 ; move head up\nG1 E-7 F2400 ; retract\nG04 S2 ; wait 2s\nG0 X0 F6000 ; wipe from oozed filament\nG1 E-1 F2400 ; undo some of the retraction to avoid oozing\nG1 F6000 ; set travel speed to move to start printing point\nM117",
"machine_end_gcode": "G4 ; wait\nG92 E0\nG1{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} ; move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic Vyper.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic Vyper",
"model_id": "Anycubic-Vyper",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_vyper_buildplate_model.stl",
"bed_texture": "anycubic_vyper_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic Vyper",
"model_id": "Anycubic-Vyper",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_vyper_buildplate_model.stl",
"bed_texture": "anycubic_vyper_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

234
resources/profiles/Anycubic/machine/Anycubic i3 Mega S 0.4 nozzle.json
View File

@@ -1,118 +1,118 @@
{
"type": "machine",
"name": "Anycubic i3 Mega S 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic i3 Mega S",
"default_print_profile": "0.20mm Standard @Anycubic i3MegaS",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "205",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"60",
"60"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.36"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"60%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"50"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M25",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F{travel_speed*60} ; move print head up\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1 X0{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} E-34.0 F{travel_speed*60} ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F{travel_speed*60} ; park print head\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}
"type": "machine",
"name": "Anycubic i3 Mega S 0.4 nozzle",
"inherits": "fdm_machine_common",
"from": "system",
"setting_id": "GM001",
"instantiation": "true",
"printer_model": "Anycubic i3 Mega S",
"default_print_profile": "0.20mm Standard @Anycubic i3MegaS",
"nozzle_diameter": [
"0.4"
],
"printable_area": [
"0x0",
"210x0",
"210x210",
"0x210"
],
"printable_height": "205",
"nozzle_type": "undefine",
"auxiliary_fan": "0",
"machine_max_acceleration_e": [
"10000",
"10000"
],
"machine_max_acceleration_extruding": [
"1250",
"1250"
],
"machine_max_acceleration_retracting": [
"1250",
"1250"
],
"machine_max_acceleration_travel": [
"1000",
"1000"
],
"machine_max_acceleration_x": [
"3000",
"3000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"60",
"60"
],
"machine_max_speed_e": [
"30",
"30"
],
"machine_max_speed_x": [
"500",
"500"
],
"machine_max_speed_y": [
"500",
"500"
],
"machine_max_speed_z": [
"8",
"8"
],
"machine_max_jerk_e": [
"5",
"5"
],
"machine_max_jerk_x": [
"10",
"10"
],
"machine_max_jerk_y": [
"10",
"10"
],
"machine_max_jerk_z": [
"0.4",
"0.4"
],
"max_layer_height": [
"0.36"
],
"min_layer_height": [
"0.08"
],
"printer_settings_id": "Anycubic",
"retraction_minimum_travel": [
"1.5"
],
"retract_before_wipe": [
"60%"
],
"retraction_length": [
"6"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
],
"deretraction_speed": [
"50"
],
"single_extruder_multi_material": "1",
"change_filament_gcode": "M600",
"machine_pause_gcode": "M25",
"default_filament_profile": [
"Anycubic Generic PLA"
],
"machine_start_gcode": "G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 P[machine_max_acceleration_extruding] R[machine_max_acceleration_retracting] T[machine_max_acceleration_travel]\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM140 S[bed_temperature_initial_layer_single] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F{travel_speed*60} ; move print head up\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0",
"machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1 X0{if max_layer_z < printable_height} Z{z_offset+min(max_layer_z+30, printable_height)}{endif} E-34.0 F{travel_speed*60} ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F{travel_speed*60} ; park print head\nM84 ; disable motors",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"scan_first_layer": "0"
}

22
resources/profiles/Anycubic/machine/Anycubic i3 Mega S.json
View File

@@ -1,12 +1,12 @@
{
"type": "machine_model",
"name": "Anycubic i3 Mega S",
"model_id": "Anycubic-i3-Mega-S",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_i3megas_buildplate_model.stl",
"bed_texture": "anycubic_i3megas_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}
"type": "machine_model",
"name": "Anycubic i3 Mega S",
"model_id": "Anycubic-i3-Mega-S",
"nozzle_diameter": "0.4",
"machine_tech": "FFF",
"family": "Anycubic",
"bed_model": "anycubic_i3megas_buildplate_model.stl",
"bed_texture": "anycubic_i3megas_buildplate_texture.png",
"hotend_model": "",
"default_materials": "Anycubic Generic ABS;Anycubic Generic PLA;Anycubic Generic PLA-CF;Anycubic Generic PETG;Anycubic Generic TPU;Anycubic Generic ASA;Anycubic Generic PC;Anycubic Generic PVA;Anycubic Generic PA;Anycubic Generic PA-CF"
}

276
resources/profiles/Anycubic/machine/fdm_machine_common.json
View File

@@ -1,139 +1,139 @@
{
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_start_gcode": "",
"machine_end_gcode": "",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"300",
"200"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_pause_gcode": "M400 U1\n",
"wipe": [
"1"
],
"z_hop_types": "Normal Lift"
}
"type": "machine",
"name": "fdm_machine_common",
"from": "system",
"instantiation": "false",
"gcode_flavor": "marlin",
"machine_start_gcode": "",
"machine_end_gcode": "",
"extruder_colour": [
"#018001"
],
"extruder_offset": [
"0x0"
],
"machine_max_acceleration_e": [
"5000",
"5000"
],
"machine_max_acceleration_extruding": [
"2000",
"2000"
],
"machine_max_acceleration_retracting": [
"5000",
"5000"
],
"machine_max_acceleration_travel": [
"3000",
"3000"
],
"machine_max_acceleration_x": [
"2000",
"2000"
],
"machine_max_acceleration_y": [
"2000",
"2000"
],
"machine_max_acceleration_z": [
"300",
"200"
],
"machine_max_speed_e": [
"25",
"25"
],
"machine_max_speed_x": [
"300",
"200"
],
"machine_max_speed_y": [
"300",
"200"
],
"machine_max_speed_z": [
"12",
"12"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"9",
"9"
],
"machine_max_jerk_y": [
"9",
"9"
],
"machine_max_jerk_z": [
"0.2",
"0.4"
],
"machine_min_extruding_rate": [
"0",
"0"
],
"machine_min_travel_rate": [
"0",
"0"
],
"max_layer_height": [
"0.3"
],
"min_layer_height": [
"0.08"
],
"printable_height": "250",
"extruder_clearance_radius": "65",
"extruder_clearance_height_to_rod": "36",
"extruder_clearance_height_to_lid": "140",
"nozzle_diameter": [
"0.4"
],
"printer_settings_id": "",
"printer_technology": "FFF",
"printer_variant": "0.4",
"retraction_minimum_travel": [
"1"
],
"retract_before_wipe": [
"70%"
],
"retract_when_changing_layer": [
"1"
],
"retraction_length": [
"0.8"
],
"retract_length_toolchange": [
"2"
],
"z_hop": [
"0.4"
],
"retract_restart_extra": [
"0"
],
"retract_restart_extra_toolchange": [
"0"
],
"retraction_speed": [
"30"
],
"deretraction_speed": [
"30"
],
"silent_mode": "0",
"single_extruder_multi_material": "1",
"change_filament_gcode": "",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_pause_gcode": "M400 U1\n",
"wipe": [
"1"
],
"z_hop_types": "Normal Lift"
}