mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 11:53:48 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF",
|
||||
"inherits": "Anker Generic PA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF",
|
||||
"inherits": "Anker Generic PA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"inherits": "Anker Generic PETG-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"inherits": "Anker Generic PETG-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL96",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL96",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL95",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL95",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"inherits": "Anker Generic PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"inherits": "Anker Generic PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA @base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA @base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA",
|
||||
"inherits": "Anker Generic PVA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSS99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA",
|
||||
"inherits": "Anker Generic PVA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSS99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "false",
|
||||
"filament_retraction_speed": "90",
|
||||
"filament_deretraction_speed": "50",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "70"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "false",
|
||||
"filament_retraction_speed": "90",
|
||||
"filament_deretraction_speed": "50",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "70"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU",
|
||||
"inherits": "Anker Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU",
|
||||
"inherits": "Anker Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,42 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"40"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"4"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"40"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"4"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.03"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"25"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.03"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"25"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user