mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 11:53:48 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,34 +1,34 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,34 +1,34 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,166 +1,166 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,79 +1,79 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
|
||||
Reference in New Issue
Block a user