mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 11:02:08 +00:00
Reduce size by Json Fromatting (#13163)
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
This commit is contained in:
Ian Bassi
@@ -1,194 +1,194 @@
|
||||
{
|
||||
"name": "Afinia",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Afinia configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Afinia H+1(HS)",
|
||||
"sub_path": "machine/Afinia H+1(HS).json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_common",
|
||||
"sub_path": "process/fdm_process_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"sub_path": "process/fdm_process_afinia_HS_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.12mm Fine @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.16mm Optimal @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.20mm Standard @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.24mm Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.28mm Extra Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS",
|
||||
"sub_path": "filament/Afinia ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+",
|
||||
"sub_path": "filament/Afinia ABS+.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+@HS",
|
||||
"sub_path": "filament/Afinia ABS+@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS@HS",
|
||||
"sub_path": "filament/Afinia ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS",
|
||||
"sub_path": "filament/Afinia Value ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"sub_path": "filament/Afinia Value ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA",
|
||||
"sub_path": "filament/Afinia PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA@HS",
|
||||
"sub_path": "filament/Afinia PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA",
|
||||
"sub_path": "filament/Afinia Value PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"sub_path": "filament/Afinia Value PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU",
|
||||
"sub_path": "filament/Afinia TPU.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU@HS",
|
||||
"sub_path": "filament/Afinia TPU@HS.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_afinia_common",
|
||||
"sub_path": "machine/fdm_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
"name": "Afinia",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Afinia configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Afinia H+1(HS)",
|
||||
"sub_path": "machine/Afinia H+1(HS).json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_common",
|
||||
"sub_path": "process/fdm_process_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"sub_path": "process/fdm_process_afinia_HS_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.12mm Fine @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.16mm Optimal @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.20mm Standard @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.24mm Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"sub_path": "process/0.28mm Extra Draft @Afinia H+1(HS).json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.18_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.24_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.30_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.36_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"sub_path": "process/fdm_process_afinia_0.42_nozzle_0.6_HS.json"
|
||||
},
|
||||
{
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS",
|
||||
"sub_path": "filament/Afinia ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+",
|
||||
"sub_path": "filament/Afinia ABS+.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+@HS",
|
||||
"sub_path": "filament/Afinia ABS+@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS@HS",
|
||||
"sub_path": "filament/Afinia ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS",
|
||||
"sub_path": "filament/Afinia Value ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"sub_path": "filament/Afinia Value ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA",
|
||||
"sub_path": "filament/Afinia PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA@HS",
|
||||
"sub_path": "filament/Afinia PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA",
|
||||
"sub_path": "filament/Afinia Value PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"sub_path": "filament/Afinia Value PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU",
|
||||
"sub_path": "filament/Afinia TPU.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU@HS",
|
||||
"sub_path": "filament/Afinia TPU@HS.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_afinia_common",
|
||||
"sub_path": "machine/fdm_afinia_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"sub_path": "machine/Afinia H+1(HS) 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS+@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,34 +1,34 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,34 +1,34 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU@HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU01_01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,37 +1,37 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,40 +1,40 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle",
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28.6"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,166 +1,166 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,79 +1,79 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2.0"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_afinia_common",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"207x0",
|
||||
"207x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "230"
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_afinia_common",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"207x0",
|
||||
"207x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "230"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
"type": "machine",
|
||||
"setting_id": "GM001",
|
||||
"name": "Afinia H+1(HS) 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "Afinia H+1(HS) 0.4 nozzle",
|
||||
"printer_model": "Afinia H+1(HS)",
|
||||
"default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.4"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,12 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Afinia H+1(HS)",
|
||||
"model_id": "my_afinia_h_1_hs_01",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Afinia",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Afinia ABS;Afinia PLA"
|
||||
"type": "machine_model",
|
||||
"name": "Afinia H+1(HS)",
|
||||
"model_id": "my_afinia_h_1_hs_01",
|
||||
"nozzle_diameter": "0.4;0.6",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Afinia",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Afinia ABS;Afinia PLA"
|
||||
}
|
||||
|
||||
@@ -1,60 +1,141 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": ["5000", "5000"],
|
||||
"machine_max_acceleration_extruding": ["20000", "20000"],
|
||||
"machine_max_acceleration_retracting": ["5000", "5000"],
|
||||
"machine_max_acceleration_travel": ["20000", "20000"],
|
||||
"machine_max_acceleration_x": ["20000", "20000"],
|
||||
"machine_max_acceleration_y": ["20000", "20000"],
|
||||
"machine_max_acceleration_z": ["500", "200"],
|
||||
"machine_max_speed_e": ["25", "25"],
|
||||
"machine_max_speed_x": ["500", "200"],
|
||||
"machine_max_speed_y": ["500", "200"],
|
||||
"machine_max_speed_z": ["12", "12"],
|
||||
"machine_max_jerk_e": ["2.5", "2.5"],
|
||||
"machine_max_jerk_x": ["9", "9"],
|
||||
"machine_max_jerk_y": ["9", "9"],
|
||||
"machine_max_jerk_z": ["0.2", "0.4"],
|
||||
"machine_min_extruding_rate": ["0", "0"],
|
||||
"machine_min_travel_rate": ["0", "0"],
|
||||
"max_layer_height": ["0.32"],
|
||||
"min_layer_height": ["0.08"],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": ["1"],
|
||||
"retract_before_wipe": ["70%"],
|
||||
"retract_when_changing_layer": ["1"],
|
||||
"retraction_length": ["0.8"],
|
||||
"retract_length_toolchange": ["2"],
|
||||
"z_hop": ["0.4"],
|
||||
"retract_restart_extra": ["0"],
|
||||
"retract_restart_extra_toolchange": ["0"],
|
||||
"retraction_speed": ["30"],
|
||||
"deretraction_speed": ["30"],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": ["1"],
|
||||
"default_filament_profile": [""],
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"bed_exclude_area": ["0x0"],
|
||||
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
"type": "machine",
|
||||
"name": "fdm_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"inherits": "fdm_machine_common",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
""
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": ";M190 S[bed_temperature_initial_layer_single]\n;M109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
|
||||
@@ -1,119 +1,119 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"silent_mode": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"5"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.12mm Fine @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,30 +1,30 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.16",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.16mm Optimal @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.16",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP021",
|
||||
"instantiation": "true",
|
||||
"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP021",
|
||||
"instantiation": "true",
|
||||
"description": "It has a smaller layer height and results in smoother surface and higher printing quality.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"top_shell_layers": "5",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.20mm Standard @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"instantiation": "true",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"top_shell_layers": "5",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.24",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"support_threshold_angle": "35",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.24mm Draft @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.24",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "150",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "150",
|
||||
"support_threshold_angle": "35",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP022",
|
||||
"instantiation": "true",
|
||||
"description": "It has a balanced layer height for good quality and reasonable printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP022",
|
||||
"instantiation": "true",
|
||||
"description": "It has a balanced layer height for good quality and reasonable printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.28",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "200",
|
||||
"support_threshold_angle": "40",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"setting_id": "GP004",
|
||||
"name": "0.28mm Extra Draft @Afinia H+1(HS)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"layer_height": "0.28",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "105",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "200",
|
||||
"support_threshold_angle": "40",
|
||||
"top_shell_layers": "4",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP023",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP023",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height with optimized settings for stronger parts.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "3",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height with optimized settings for stronger parts.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "3",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "It has a bigger layer height for faster printing but with more visible layer lines.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle",
|
||||
"inherits": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "It has the biggest layer height for fastest printing but with very visible layer lines.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Afinia H+1(HS) 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.18",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "120",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.18",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "120",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.18",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "120",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.18_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.18",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "120",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.24",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.24",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.24",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.24_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.24",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.30_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.36",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "140",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.36",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "140",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.36",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "140",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.36_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.36",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "140",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.42",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.42",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.42",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_0.42_nozzle_0.6_HS",
|
||||
"inherits": "fdm_process_afinia_HS_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.42",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "130",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"tree_support_tip_diameter": "1.2"
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"default_acceleration": "4000",
|
||||
"travel_acceleration": "4000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_speed": "200",
|
||||
"compatible_printers": []
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_HS_common",
|
||||
"inherits": "fdm_process_afinia_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"default_acceleration": "4000",
|
||||
"travel_acceleration": "4000",
|
||||
"outer_wall_acceleration": "2500",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_speed": "200",
|
||||
"compatible_printers": []
|
||||
}
|
||||
|
||||
@@ -1,79 +1,79 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_common",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_speed": "50",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers_condition": "",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "1",
|
||||
"default_acceleration": "6000",
|
||||
"travel_acceleration": "6000",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"line_width": "0.42",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "90",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "160",
|
||||
"gap_infill_speed": "50",
|
||||
"sparse_infill_speed": "250",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"only_one_wall_top": "1",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_expansion": "0",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "80",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "35",
|
||||
"wall_generator": "classic",
|
||||
"exclude_object": "1",
|
||||
"wall_infill_order": "outer wall/inner wall/infill",
|
||||
"compatible_printers": []
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_afinia_common",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_speed": "50",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers_condition": "",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "1",
|
||||
"default_acceleration": "6000",
|
||||
"travel_acceleration": "6000",
|
||||
"outer_wall_acceleration": "3000",
|
||||
"inner_wall_acceleration": "5000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"line_width": "0.42",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "90",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "160",
|
||||
"gap_infill_speed": "50",
|
||||
"sparse_infill_speed": "250",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"only_one_wall_top": "1",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_expansion": "0",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "200",
|
||||
"support_interface_speed": "80",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "500",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "35",
|
||||
"wall_generator": "classic",
|
||||
"exclude_object": "1",
|
||||
"wall_infill_order": "outer wall/inner wall/infill",
|
||||
"compatible_printers": []
|
||||
}
|
||||
|
||||
@@ -1,72 +1,72 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "50",
|
||||
"brim_width": "5",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "160",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "90",
|
||||
"gap_infill_speed": "50",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"sparse_infill_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "2",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "200",
|
||||
"support_threshold_angle": "40",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "120",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": []
|
||||
}
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "50",
|
||||
"brim_width": "5",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "120",
|
||||
"inner_wall_speed": "160",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_infill_speed": "90",
|
||||
"gap_infill_speed": "50",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"sparse_infill_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "2",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "200",
|
||||
"support_threshold_angle": "40",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "120",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": []
|
||||
}
|
||||
|
||||
@@ -1,237 +1,237 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anet A8 Plus 0.4 nozzle",
|
||||
"inherits": "",
|
||||
"from": "User",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"bed_mesh_max": "99999,99999",
|
||||
"bed_mesh_min": "-99999,-99999",
|
||||
"bed_mesh_probe_distance": "50,50",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "M600",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_bed_type": "",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "marlin",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"900"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"900"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"6",
|
||||
"6"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"6",
|
||||
"6"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"64",
|
||||
"16"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"max_resonance_avoidance_speed": "120",
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"min_resonance_avoidance_speed": "70",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_height": "2.5",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"nozzle_volume": "0",
|
||||
"parking_pos_retraction": "92",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Anet A8 Plus",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "Anet A8 Plus 0.4 nozzle",
|
||||
"printer_structure": "undefine",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"resonance_avoidance": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "0",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": "48x48/PNG,300x300/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Anet A8 Plus 0.4 nozzle",
|
||||
"inherits": "",
|
||||
"from": "User",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"bed_mesh_max": "99999,99999",
|
||||
"bed_mesh_min": "-99999,-99999",
|
||||
"bed_mesh_probe_distance": "50,50",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "M600",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_bed_type": "",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Anycubic 4MaxPro2",
|
||||
"deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "-2",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"#018001"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"gcode_flavor": "marlin",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M104 S0 ; turn off extruder heating\nM140 S0 ; turn off bed heating\nM107 ; turn off fans\nG91 ; relative positioning\nG0 Z+0.5 ; move Z up a tiny bit\nG90 ; absolute positioning\nG0 X135 Y105 F{machine_max_speed_x[0]*60} ; move extruder to center position\nG0 Z190.5 F{machine_max_speed_z[0]*60} ; lower the plattform to Z min\nM84 ; steppers off\nG90 ; absolute positioning\n",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250",
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500",
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1000",
|
||||
"900"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1000",
|
||||
"900"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"100"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"6",
|
||||
"6"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"6",
|
||||
"6"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"64",
|
||||
"16"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_start_gcode": "G21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 X0 Y0 ; home X and Y\nG28 Z0 ; home Z\nG1 Z30 F{machine_max_speed_z[0]*60} ; move Z a bit down to not blow on the bed edge while heating\nG1 X10 F3900 ; let some space on x to prevent the filament cooling exhaust from beeing blocked by the servo motor\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp\nM104 S[nozzle_temperature_initial_layer] ; set extruder temp\nM106 S80 ; turn on fan to prevent air nozzle melt while heating up\nM109 S[nozzle_temperature_initial_layer] ; wait for extruder temp\nM107 ; start with the fan off\nG28 X0 ; goto X home again\nG92 E0 ; zero the extruded length\nG1 Z0.2 F360 ; move plattform upwards\n; extrude material next to the plattform (comment or remove following lines to disable)\nG1 F180 E20 ; extrude some material next to the plattform\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG92 E0 ; zero the extruded length again\nG1 X5 F3900 ; move sideways to get rid of that string\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\nG92 E0 ; zero the extruded length again\n; draw intro line (comment or remove following lines to disable)\nG1 X30 E5 F700 ; draw intro line\nG92 E0 ; zero the extruded length\nG1 E-[retraction_length] F{retraction_speed[0]*60} ; do a filament retract\nG1 X40 Z2.0 ; move away from the introline\nG92 E0 ; zero the extruded length again\nG1 E[retraction_length] F{retraction_speed[0]*60} ; do a filament deretract with retract parameters\n; end of intro line code\nM117 Printing...\nG5",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.3"
|
||||
],
|
||||
"max_resonance_avoidance_speed": "120",
|
||||
"min_layer_height": [
|
||||
"0.07"
|
||||
],
|
||||
"min_resonance_avoidance_speed": "70",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_height": "2.5",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"nozzle_volume": "0",
|
||||
"parking_pos_retraction": "92",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"300x0",
|
||||
"300x300",
|
||||
"0x300"
|
||||
],
|
||||
"printable_height": "350",
|
||||
"printer_model": "Anet A8 Plus",
|
||||
"printer_notes": "",
|
||||
"printer_settings_id": "Anet A8 Plus 0.4 nozzle",
|
||||
"printer_structure": "undefine",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"resonance_avoidance": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"10"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "0",
|
||||
"template_custom_gcode": "",
|
||||
"thumbnails": "48x48/PNG,300x300/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
|
||||
@@ -1,390 +1,390 @@
|
||||
{
|
||||
"name": "Anker",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Anker configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Anker M5",
|
||||
"sub_path": "machine/Anker M5.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal Hot End",
|
||||
"sub_path": "machine/Anker M5 All-Metal Hot End.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C",
|
||||
"sub_path": "machine/Anker M5C.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common",
|
||||
"sub_path": "process/fdm_process_anker_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_2",
|
||||
"sub_path": "process/fdm_process_anker_common_0_2.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_25",
|
||||
"sub_path": "process/fdm_process_anker_common_0_25.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_6",
|
||||
"sub_path": "process/fdm_process_anker_common_0_6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Ultradetail @Anker",
|
||||
"sub_path": "process/0.05mm Ultradetail @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Detail @Anker",
|
||||
"sub_path": "process/0.10mm Detail @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Optimal @Anker",
|
||||
"sub_path": "process/0.15mm Optimal @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Anker",
|
||||
"sub_path": "process/0.20mm Standard @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm Draft @Anker",
|
||||
"sub_path": "process/0.25mm Draft @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Superdraft @Anker",
|
||||
"sub_path": "process/0.30mm Superdraft @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_fast_common",
|
||||
"sub_path": "process/fdm_process_anker_fast_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Optimal 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.05mm Optimal 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.10mm Standard 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Draft 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Draft 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Optimal 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.05mm Optimal 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.10mm Standard 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Draft 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Draft 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Detail 0.6 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Detail 0.6 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Optimal 0.6 nozzle @Anker",
|
||||
"sub_path": "process/0.20mm Optimal 0.6 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.30mm Standard 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.35mm Draft 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.35mm Draft 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Superdraft 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.40mm Superdraft 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Fast @Anker",
|
||||
"sub_path": "process/0.15mm Fast @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Fast @Anker",
|
||||
"sub_path": "process/0.20mm Fast @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm Fast @Anker",
|
||||
"sub_path": "process/0.25mm Fast @Anker.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_asa",
|
||||
"sub_path": "filament/fdm_filament_asa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa",
|
||||
"sub_path": "filament/fdm_filament_pa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pc",
|
||||
"sub_path": "filament/fdm_filament_pc.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pet",
|
||||
"sub_path": "filament/fdm_filament_pet.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pva",
|
||||
"sub_path": "filament/fdm_filament_pva.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS @base",
|
||||
"sub_path": "filament/Anker Generic ABS @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA @base",
|
||||
"sub_path": "filament/Anker Generic ASA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA @base",
|
||||
"sub_path": "filament/Anker Generic PA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"sub_path": "filament/Anker Generic PA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC @base",
|
||||
"sub_path": "filament/Anker Generic PC @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG @base",
|
||||
"sub_path": "filament/Anker Generic PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"sub_path": "filament/Anker Generic PETG-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA @base",
|
||||
"sub_path": "filament/Anker Generic PLA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"sub_path": "filament/Anker Generic PLA Silk @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"sub_path": "filament/Anker Generic PLA+ @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"sub_path": "filament/Anker Generic PLA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PVA @base",
|
||||
"sub_path": "filament/Anker Generic PVA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic TPU @base",
|
||||
"sub_path": "filament/Anker Generic TPU @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS",
|
||||
"sub_path": "filament/Anker Generic ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic ABS 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic ABS 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA",
|
||||
"sub_path": "filament/Anker Generic ASA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic ASA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic ASA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA",
|
||||
"sub_path": "filament/Anker Generic PA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA-CF",
|
||||
"sub_path": "filament/Anker Generic PA-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC",
|
||||
"sub_path": "filament/Anker Generic PC.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PC 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PC 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG",
|
||||
"sub_path": "filament/Anker Generic PETG.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PETG 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PETG 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"sub_path": "filament/Anker Generic PETG-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA",
|
||||
"sub_path": "filament/Anker Generic PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"sub_path": "filament/Anker Generic PLA Silk.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA Silk 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA Silk 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+",
|
||||
"sub_path": "filament/Anker Generic PLA+.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA+ 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA+ 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"sub_path": "filament/Anker Generic PLA-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PVA",
|
||||
"sub_path": "filament/Anker Generic PVA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic TPU",
|
||||
"sub_path": "filament/Anker Generic TPU.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_marlin_common",
|
||||
"sub_path": "machine/fdm_marlin_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
"name": "Anker",
|
||||
"version": "02.03.02.60",
|
||||
"force_update": "0",
|
||||
"description": "Anker configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Anker M5",
|
||||
"sub_path": "machine/Anker M5.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal Hot End",
|
||||
"sub_path": "machine/Anker M5 All-Metal Hot End.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C",
|
||||
"sub_path": "machine/Anker M5C.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common",
|
||||
"sub_path": "process/fdm_process_anker_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_2",
|
||||
"sub_path": "process/fdm_process_anker_common_0_2.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_25",
|
||||
"sub_path": "process/fdm_process_anker_common_0_25.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_common_0_6",
|
||||
"sub_path": "process/fdm_process_anker_common_0_6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Ultradetail @Anker",
|
||||
"sub_path": "process/0.05mm Ultradetail @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Detail @Anker",
|
||||
"sub_path": "process/0.10mm Detail @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Optimal @Anker",
|
||||
"sub_path": "process/0.15mm Optimal @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Anker",
|
||||
"sub_path": "process/0.20mm Standard @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm Draft @Anker",
|
||||
"sub_path": "process/0.25mm Draft @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Superdraft @Anker",
|
||||
"sub_path": "process/0.30mm Superdraft @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_anker_fast_common",
|
||||
"sub_path": "process/fdm_process_anker_fast_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Optimal 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.05mm Optimal 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.10mm Standard 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Draft 0.2 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Draft 0.2 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.05mm Optimal 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.05mm Optimal 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.10mm Standard 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Draft 0.25 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Draft 0.25 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Detail 0.6 nozzle @Anker",
|
||||
"sub_path": "process/0.15mm Detail 0.6 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Optimal 0.6 nozzle @Anker",
|
||||
"sub_path": "process/0.20mm Optimal 0.6 nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.30mm Standard 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.35mm Draft 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.35mm Draft 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Superdraft 0.6mm nozzle @Anker",
|
||||
"sub_path": "process/0.40mm Superdraft 0.6mm nozzle @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm Fast @Anker",
|
||||
"sub_path": "process/0.15mm Fast @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Fast @Anker",
|
||||
"sub_path": "process/0.20mm Fast @Anker.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm Fast @Anker",
|
||||
"sub_path": "process/0.25mm Fast @Anker.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_abs",
|
||||
"sub_path": "filament/fdm_filament_abs.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_asa",
|
||||
"sub_path": "filament/fdm_filament_asa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pa",
|
||||
"sub_path": "filament/fdm_filament_pa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pc",
|
||||
"sub_path": "filament/fdm_filament_pc.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pet",
|
||||
"sub_path": "filament/fdm_filament_pet.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pva",
|
||||
"sub_path": "filament/fdm_filament_pva.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS @base",
|
||||
"sub_path": "filament/Anker Generic ABS @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA @base",
|
||||
"sub_path": "filament/Anker Generic ASA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA @base",
|
||||
"sub_path": "filament/Anker Generic PA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"sub_path": "filament/Anker Generic PA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC @base",
|
||||
"sub_path": "filament/Anker Generic PC @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG @base",
|
||||
"sub_path": "filament/Anker Generic PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"sub_path": "filament/Anker Generic PETG-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA @base",
|
||||
"sub_path": "filament/Anker Generic PLA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"sub_path": "filament/Anker Generic PLA Silk @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"sub_path": "filament/Anker Generic PLA+ @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"sub_path": "filament/Anker Generic PLA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PVA @base",
|
||||
"sub_path": "filament/Anker Generic PVA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic TPU @base",
|
||||
"sub_path": "filament/Anker Generic TPU @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS",
|
||||
"sub_path": "filament/Anker Generic ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic ABS 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic ABS 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA",
|
||||
"sub_path": "filament/Anker Generic ASA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic ASA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic ASA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA",
|
||||
"sub_path": "filament/Anker Generic PA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PA-CF",
|
||||
"sub_path": "filament/Anker Generic PA-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC",
|
||||
"sub_path": "filament/Anker Generic PC.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PC 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PC 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG",
|
||||
"sub_path": "filament/Anker Generic PETG.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PETG 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PETG 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"sub_path": "filament/Anker Generic PETG-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA",
|
||||
"sub_path": "filament/Anker Generic PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"sub_path": "filament/Anker Generic PLA Silk.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA Silk 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA Silk 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+",
|
||||
"sub_path": "filament/Anker Generic PLA+.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA+ 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"sub_path": "filament/Anker Generic PLA+ 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"sub_path": "filament/Anker Generic PLA-CF.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic PVA",
|
||||
"sub_path": "filament/Anker Generic PVA.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker Generic TPU",
|
||||
"sub_path": "filament/Anker Generic TPU.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_marlin_common",
|
||||
"sub_path": "machine/fdm_marlin_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5 All-Metal 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5 All-Metal 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.2 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.25 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.25 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.4 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anker M5C 0.6 nozzle",
|
||||
"sub_path": "machine/Anker M5C 0.6 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.2 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS 0.25 nozzle",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS @base",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"filament_id": "GFB99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ABS",
|
||||
"inherits": "Anker Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.2 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA 0.25 nozzle",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA @base",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "GFB98",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic ASA",
|
||||
"inherits": "Anker Generic ASA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF @base",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"filament_id": "GFN98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF",
|
||||
"inherits": "Anker Generic PA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA-CF",
|
||||
"inherits": "Anker Generic PA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PA",
|
||||
"inherits": "Anker Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.2 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC 0.25 nozzle",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC @base",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"filament_id": "GFC99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PC",
|
||||
"inherits": "Anker Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSC99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.2 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG 0.25 nozzle",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG99",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "GFG98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_speed": "20",
|
||||
"filament_deretraction_speed": "60",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "100"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"inherits": "Anker Generic PETG-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG-CF",
|
||||
"inherits": "Anker Generic PETG-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PETG",
|
||||
"inherits": "Anker Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSG99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL96",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL96",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA Silk",
|
||||
"inherits": "Anker Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL96",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.2 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_20",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.2 nozzle",
|
||||
"Anker M5 All-Metal 0.2 nozzle",
|
||||
"Anker M5C 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ 0.25 nozzle",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95_25",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.25 nozzle",
|
||||
"Anker M5 All-Metal 0.25 nozzle",
|
||||
"Anker M5C 0.25 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL95",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+ @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL95",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA+",
|
||||
"inherits": "Anker Generic PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL95",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF @base",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "GFL98",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"inherits": "Anker Generic PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA-CF",
|
||||
"inherits": "Anker Generic PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL98",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PLA",
|
||||
"inherits": "Anker Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSL99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,8 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA @base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA @base",
|
||||
"inherits": "fdm_filament_pva",
|
||||
"from": "system",
|
||||
"filament_id": "GFS99",
|
||||
"instantiation": "false"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA",
|
||||
"inherits": "Anker Generic PVA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSS99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic PVA",
|
||||
"inherits": "Anker Generic PVA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSS99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,13 +1,13 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "false",
|
||||
"filament_retraction_speed": "90",
|
||||
"filament_deretraction_speed": "50",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "70"
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU @base",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "GFU99",
|
||||
"instantiation": "false",
|
||||
"filament_retraction_speed": "90",
|
||||
"filament_deretraction_speed": "50",
|
||||
"filament_retract_when_changing_layer": "1",
|
||||
"filament_wipe": "1",
|
||||
"filament_retract_before_wipe": "70"
|
||||
}
|
||||
|
||||
@@ -1,16 +1,16 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU",
|
||||
"inherits": "Anker Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "Anker Generic TPU",
|
||||
"inherits": "Anker Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Anker M5 0.4 nozzle",
|
||||
"Anker M5 0.6 nozzle",
|
||||
"Anker M5 All-Metal 0.4 nozzle",
|
||||
"Anker M5 All-Metal 0.6 nozzle",
|
||||
"Anker M5C 0.4 nozzle",
|
||||
"Anker M5C 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,42 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"10"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"40"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"4"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_cost": [
|
||||
"40"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"4"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"4"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"30"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pet",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,85 +1,85 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,88 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pva",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PVA"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"60"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,82 +1,82 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.03"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"25"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_tpu",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.03"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"30"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"25"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.8"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -1,38 +1,38 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anker M5 0.2 nozzle",
|
||||
"inherits": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printer_model": "Anker M5",
|
||||
"printer_variant": "0.2",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [],
|
||||
"default_filament_profile": [
|
||||
"Anker Generic PLA+"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard 0.2mm nozzle @Anker",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "30",
|
||||
"extruder_clearance_radius": "45",
|
||||
"printer_structure": "i3",
|
||||
"nozzle_type": "brass",
|
||||
"printable_height": "250",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"upward_compatible_machine": []
|
||||
}
|
||||
"type": "machine",
|
||||
"name": "Anker M5 0.2 nozzle",
|
||||
"inherits": "fdm_marlin_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM004",
|
||||
"instantiation": "true",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"printer_model": "Anker M5",
|
||||
"printer_variant": "0.2",
|
||||
"auxiliary_fan": "0",
|
||||
"bed_exclude_area": [],
|
||||
"default_filament_profile": [
|
||||
"Anker Generic PLA+"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard 0.2mm nozzle @Anker",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "30",
|
||||
"extruder_clearance_radius": "45",
|
||||
"printer_structure": "i3",
|
||||
"nozzle_type": "brass",
|
||||
"printable_height": "250",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"235x0",
|
||||
"235x235",
|
||||
"0x235"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.75"
|
||||
],
|
||||
"upward_compatible_machine": []
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user