diff --git a/resources/profiles/Pragostroj.json b/resources/profiles/Pragostroj.json new file mode 100644 index 0000000000..01ecad248f --- /dev/null +++ b/resources/profiles/Pragostroj.json @@ -0,0 +1,194 @@ +{ + "name": "Pragostroj", + "version": "01.00.01.00", + "force_update": "0", + "description": "Pragostroj printers config", + "machine_model_list": [ + { + "name": "KINARB 1HB", + "sub_path": "machine/KINARB1HB.json" + }, + { + "name": "KINARB 2HB", + "sub_path": "machine/KINARB2HB.json" + } + ], + "machine_list": [ + { + "name": "fdm_machine_common", + "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "kinarb_machine_common", + "sub_path": "machine/kinarb_machine_common.json" + }, + { + "name": "KINARB 1HB 0.4 nozzle", + "sub_path": "machine/KINARB 1HB 04 nozzle.json" + }, + { + "name": "KINARB 1HB 0.5 nozzle", + "sub_path": "machine/KINARB 1HB 05 nozzle.json" + }, + { + "name": "KINARB 1HB 0.6 nozzle", + "sub_path": "machine/KINARB 1HB 06 nozzle.json" + }, + { + "name": "KINARB 1HB 0.8 nozzle", + "sub_path": "machine/KINARB 1HB 08 nozzle.json" + }, + { + "name": "KINARB 1HB 1.0 nozzle", + "sub_path": "machine/KINARB 1HB 10 nozzle.json" + }, + { + "name": "KINARB 1HB 1.2 nozzle", + "sub_path": "machine/KINARB 1HB 12 nozzle.json" + }, + { + "name": "KINARB 1HB 1.6 nozzle", + "sub_path": "machine/KINARB 1HB 16 nozzle.json" + }, + { + "name": "kinarb_2hb_machine_common", + "sub_path": "machine/kinarb_2hb_machine_common.json" + }, + { + "name": "KINARB 2HB 0.4 nozzle", + "sub_path": "machine/KINARB 2HB 04 nozzle.json" + }, + { + "name": "KINARB 2HB 0.5 nozzle", + "sub_path": "machine/KINARB 2HB 05 nozzle.json" + }, + { + "name": "KINARB 2HB 0.6 nozzle", + "sub_path": "machine/KINARB 2HB 06 nozzle.json" + }, + { + "name": "KINARB 2HB 0.8 nozzle", + "sub_path": "machine/KINARB 2HB 08 nozzle.json" + }, + { + "name": "KINARB 2HB 1.0 nozzle", + "sub_path": "machine/KINARB 2HB 10 nozzle.json" + }, + { + "name": "KINARB 2HB 1.2 nozzle", + "sub_path": "machine/KINARB 2HB 12 nozzle.json" + }, + { + "name": "KINARB 2HB 1.6 nozzle", + "sub_path": "machine/KINARB 2HB 16 nozzle.json" + } + ], + "process_list": [ + { + "name": "fdm_process_common", + "sub_path": "process/fdm_process_common.json" + }, + { + "name": "process_common_kinarb", + "sub_path": "process/process_common_kinarb.json" + }, + { + "name": "0.15mm PETG fine @Pragostroj 0.5", + "sub_path": "process/0.15mm PETG fine @Pragostroj 0.5.json" + }, + { + "name": "0.25mm Draft @Pragostroj 0.5", + "sub_path": "process/0.25mm Draft @Pragostroj 0.5.json" + }, + { + "name": "0.25mm PP Draft @Pragostroj 0.5", + "sub_path": "process/0.25mm PP Draft @Pragostroj 0.5.json" + }, + { + "name": "0.25mm quality @Pragostroj 0.5", + "sub_path": "process/0.25mm quality @Pragostroj 0.5.json" + }, + { + "name": "0.2mm Draft @Pragostroj 0.4", + "sub_path": "process/0.2mm Draft @Pragostroj 0.4.json" + }, + { + "name": "0.3mm Draft @Pragostroj 0.6", + "sub_path": "process/0.3mm Draft @Pragostroj 0.6.json" + }, + { + "name": "0.40mm quality @Pragostroj 0.8", + "sub_path": "process/0.40mm quality @Pragostroj 0.8.json" + }, + { + "name": "0.4mm Draft @Pragostroj 0.8", + "sub_path": "process/0.4mm Draft @Pragostroj 0.8.json" + }, + { + "name": "0.4mm PP Draft @Pragostroj 0.8", + "sub_path": "process/0.4mm PP Draft @Pragostroj 0.8.json" + }, + { + "name": "0.5mm Draft @Pragostroj 1.0", + "sub_path": "process/0.5mm Draft @Pragostroj 1.0.json" + }, + { + "name": "0.6mm Draft @Pragostroj 1.2", + "sub_path": "process/0.6mm Draft @Pragostroj 1.2.json" + }, + { + "name": "0.8mm Draft @Pragostroj 1.6", + "sub_path": "process/0.8mm Draft @Pragostroj 1.6.json" + }, + { + "name": "0.25mm quality @Pragostroj 0.5 - 100mms", + "sub_path": "process/0.25mm quality @Pragostroj 0.5 - 100mms.json" + } + ], + "filament_list": [ + { + "name": "fdm_filament_common", + "sub_path": "filament/fdm_filament_common.json" + }, + { + "name": "fdm_filament_hips", + "sub_path": "filament/fdm_filament_hips.json" + }, + { + "name": "fdm_filament_petg", + "sub_path": "filament/fdm_filament_petg.json" + }, + { + "name": "fdm_filament_pla", + "sub_path": "filament/fdm_filament_pla.json" + }, + { + "name": "fdm_filament_pp", + "sub_path": "filament/fdm_filament_pp.json" + }, + { + "name": "Pragostroj hips @Pragostroj", + "sub_path": "filament/Pragostroj hips @Pragostroj.json" + }, + { + "name": "Pragostroj PETG @Pragostroj 0.5 nozzle", + "sub_path": "filament/Pragostroj PETG @Pragostroj 0.5 nozzle.json" + }, + { + "name": "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "sub_path": "filament/Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle.json" + }, + { + "name": "Pragostroj PLAP @Pragostroj", + "sub_path": "filament/Pragostroj PLAP @Pragostroj.json" + }, + { + "name": "Pragostroj PP @Pragostroj 0.5 nozzle", + "sub_path": "filament/Pragostroj PP @Pragostroj 0.5 nozzle.json" + }, + { + "name": "Pragostroj PP @Pragostroj 0.8 nozzle", + "sub_path": "filament/Pragostroj PP @Pragostroj 0.8 nozzle.json" + } + ] +} diff --git a/resources/profiles/Pragostroj/KINARB 1HB_cover.png b/resources/profiles/Pragostroj/KINARB 1HB_cover.png new file mode 100644 index 0000000000..4ef3cf5e43 Binary files /dev/null and b/resources/profiles/Pragostroj/KINARB 1HB_cover.png differ diff --git a/resources/profiles/Pragostroj/KINARB 2HB_cover.png b/resources/profiles/Pragostroj/KINARB 2HB_cover.png new file mode 100644 index 0000000000..4ef3cf5e43 Binary files /dev/null and b/resources/profiles/Pragostroj/KINARB 2HB_cover.png differ diff --git a/resources/profiles/Pragostroj/Pragostroj_cover.png b/resources/profiles/Pragostroj/Pragostroj_cover.png new file mode 100644 index 0000000000..4ef3cf5e43 Binary files /dev/null and b/resources/profiles/Pragostroj/Pragostroj_cover.png differ diff --git a/resources/profiles/Pragostroj/filament/Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle.json b/resources/profiles/Pragostroj/filament/Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle.json new file mode 100644 index 0000000000..b879430ace --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "WMVkoSEAS0OVhEgL", + "filament_id": "OFyKW1DX", + "instantiation": "true", + "filament_vendor": [ + "Fillamentum" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.4 nozzle", + "KINARB 2HB 0.4 nozzle", + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle", + "KINARB 1HB 0.6 nozzle", + "KINARB 2HB 0.6 nozzle", + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle", + "KINARB 1HB 1.0 nozzle", + "KINARB 2HB 1.0 nozzle", + "KINARB 1HB 1.2 nozzle", + "KINARB 2HB 1.2 nozzle", + "KINARB 1HB 1.6 nozzle", + "KINARB 2HB 1.6 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/Pragostroj PETG @Pragostroj 0.5 nozzle.json b/resources/profiles/Pragostroj/filament/Pragostroj PETG @Pragostroj 0.5 nozzle.json new file mode 100644 index 0000000000..55740ed62f --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Pragostroj PETG @Pragostroj 0.5 nozzle.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Pragostroj PETG @Pragostroj 0.5 nozzle", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "LXUXFNc2wMJfsv1D", + "filament_id": "OFXNhQHm", + "instantiation": "true", + "filament_vendor": [ + "Pragostroj" + ], + "filament_settings_id": [ + "Pragostroj PETG @Pragostroj 0.5 nozzle" + ], + "filament_flow_ratio": [ + "0.95" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.12" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/Pragostroj PLAP @Pragostroj.json b/resources/profiles/Pragostroj/filament/Pragostroj PLAP @Pragostroj.json new file mode 100644 index 0000000000..6656aeb1d2 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Pragostroj PLAP @Pragostroj.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Pragostroj PLAP @Pragostroj", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zN1e8RYMoHXldKsZ", + "filament_id": "OFjKU9JG", + "instantiation": "true", + "filament_vendor": [ + "Pragostroj" + ], + "filament_settings_id": [ + "PLAP" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.17" + ], + "slow_down_layer_time": [ + "0" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.4 nozzle", + "KINARB 2HB 0.4 nozzle", + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle", + "KINARB 1HB 0.6 nozzle", + "KINARB 2HB 0.6 nozzle", + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle", + "KINARB 1HB 1.0 nozzle", + "KINARB 2HB 1.0 nozzle", + "KINARB 1HB 1.2 nozzle", + "KINARB 2HB 1.2 nozzle", + "KINARB 1HB 1.6 nozzle", + "KINARB 2HB 1.6 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.5 nozzle.json b/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.5 nozzle.json new file mode 100644 index 0000000000..6157b0c078 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.5 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "name": "Pragostroj PP @Pragostroj 0.5 nozzle", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "kamBMjjHXAQsYUsQ", + "filament_id": "OFp4bAZ8", + "instantiation": "true", + "filament_vendor": [ + "Pragostroj" + ], + "filament_settings_id": [ + "Pragostroj PP @Pragostroj 0.5 nozzle" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_shrink": [ + "101%" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.05" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.8 nozzle.json b/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.8 nozzle.json new file mode 100644 index 0000000000..ab40babd82 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Pragostroj PP @Pragostroj 0.8 nozzle.json @@ -0,0 +1,46 @@ +{ + "type": "filament", + "name": "Pragostroj PP @Pragostroj 0.8 nozzle", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "md2tDgtQe6V3fuWU", + "filament_id": "OFp4bAZ8", + "instantiation": "true", + "filament_vendor": [ + "Pragostroj" + ], + "filament_settings_id": [ + "Pragostroj PP @Pragostroj 0.8 nozzle" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_shrink": [ + "101%" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.05" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/Pragostroj hips @Pragostroj.json b/resources/profiles/Pragostroj/filament/Pragostroj hips @Pragostroj.json new file mode 100644 index 0000000000..e40eb213f6 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/Pragostroj hips @Pragostroj.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "Pragostroj hips @Pragostroj", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "K2nm1PBtMp2msIN9", + "filament_id": "OF0g2qrF", + "instantiation": "true", + "filament_vendor": [ + "Pragostroj" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "compatible_printers": [ + "KINARB 1HB 0.4 nozzle", + "KINARB 2HB 0.4 nozzle", + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle", + "KINARB 1HB 0.6 nozzle", + "KINARB 2HB 0.6 nozzle", + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle", + "KINARB 1HB 1.0 nozzle", + "KINARB 2HB 1.0 nozzle", + "KINARB 1HB 1.2 nozzle", + "KINARB 2HB 1.2 nozzle", + "KINARB 1HB 1.6 nozzle", + "KINARB 2HB 1.6 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/filament/fdm_filament_common.json b/resources/profiles/Pragostroj/filament/fdm_filament_common.json new file mode 100644 index 0000000000..775e6b55ca --- /dev/null +++ b/resources/profiles/Pragostroj/filament/fdm_filament_common.json @@ -0,0 +1,135 @@ +{ + "type": "filament", + "name": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_threshold": [ + "50%" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "50" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_settings_id": [ + "" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "bed_type": [ + "Cool Plate" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "full_fan_speed_layer": [ + "0" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "45" + ], + "slow_down_min_speed": [ + "5" + ], + "slow_down_layer_time": [ + "5" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ] +} diff --git a/resources/profiles/Pragostroj/filament/fdm_filament_hips.json b/resources/profiles/Pragostroj/filament/fdm_filament_hips.json new file mode 100644 index 0000000000..7d1ee7debc --- /dev/null +++ b/resources/profiles/Pragostroj/filament/fdm_filament_hips.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "fdm_filament_hips", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_type": [ + "HIPS" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_is_support": [ + "1" + ], + "filament_cost": [ + "1000" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "chamber_temperature": [ + "80" + ], + "temperature_vitrification": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "20" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.02" + ], + "required_nozzle_HRC": [ + "3" + ] +} diff --git a/resources/profiles/Pragostroj/filament/fdm_filament_petg.json b/resources/profiles/Pragostroj/filament/fdm_filament_petg.json new file mode 100644 index 0000000000..c8c2fec6fe --- /dev/null +++ b/resources/profiles/Pragostroj/filament/fdm_filament_petg.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "fdm_filament_petg", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_type": [ + "PETG" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "temperature_vitrification": [ + "70" + ], + "fan_min_speed": [ + "30" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "8" + ], + "fan_cooling_layer_time": [ + "20" + ], + "idle_temperature": [ + "0" + ] +} diff --git a/resources/profiles/Pragostroj/filament/fdm_filament_pla.json b/resources/profiles/Pragostroj/filament/fdm_filament_pla.json new file mode 100644 index 0000000000..7101390bd2 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/fdm_filament_pla.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "idle_temperature": [ + "0" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "70" + ] +} diff --git a/resources/profiles/Pragostroj/filament/fdm_filament_pp.json b/resources/profiles/Pragostroj/filament/fdm_filament_pp.json new file mode 100644 index 0000000000..fc1161d3e5 --- /dev/null +++ b/resources/profiles/Pragostroj/filament/fdm_filament_pp.json @@ -0,0 +1,61 @@ +{ + "type": "filament", + "name": "fdm_filament_pp", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_type": [ + "PP" + ], + "filament_density": [ + "0.9" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_shrink": [ + "101%" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "temperature_vitrification": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "5" + ], + "fan_cooling_layer_time": [ + "20" + ], + "idle_temperature": [ + "0" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 04 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 04 nozzle.json new file mode 100644 index 0000000000..e470acd507 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 04 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "machine", + "name": "KINARB 1HB 0.4 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "pm3ddboqV14wpT5B", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "default_print_profile": "0.2mm Draft @Pragostroj 0.4", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 05 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 05 nozzle.json new file mode 100644 index 0000000000..1c9682e440 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 05 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "machine", + "name": "KINARB 1HB 0.5 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "GQD5YwY5gOkUByac", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5" + ], + "default_print_profile": "0.25mm Draft @Pragostroj 0.5", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 06 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 06 nozzle.json new file mode 100644 index 0000000000..c2415e9b6d --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 06 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "KINARB 1HB 0.6 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "7rc9qsIH4SpBjTfC", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "default_print_profile": "0.3mm Draft @Pragostroj 0.6", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.15" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 08 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 08 nozzle.json new file mode 100644 index 0000000000..9d82707197 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 08 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "KINARB 1HB 0.8 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "ZQhln1W2k0RcGsAW", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "default_print_profile": "0.4mm Draft @Pragostroj 0.8", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.2" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 10 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 10 nozzle.json new file mode 100644 index 0000000000..986715cb58 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 10 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "KINARB 1HB 1.0 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "YzDkELvWtxCX8YCV", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "1.0", + "nozzle_diameter": [ + "1.0" + ], + "default_print_profile": "0.5mm Draft @Pragostroj 1.0", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ], + "max_layer_height": [ + "0.8" + ], + "min_layer_height": [ + "0.25" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 12 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 12 nozzle.json new file mode 100644 index 0000000000..8b25786139 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 12 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "KINARB 1HB 1.2 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "FbeIpEH1KB3OxbWZ", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "1.2", + "nozzle_diameter": [ + "1.2" + ], + "default_print_profile": "0.6mm Draft @Pragostroj 1.2", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ], + "max_layer_height": [ + "0.96" + ], + "min_layer_height": [ + "0.3" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 1HB 16 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 1HB 16 nozzle.json new file mode 100644 index 0000000000..882b4e596a --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 1HB 16 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "KINARB 1HB 1.6 nozzle", + "inherits": "kinarb_machine_common", + "from": "system", + "setting_id": "HYs1e2qsnzkPaO9J", + "instantiation": "true", + "printer_model": "KINARB 1HB", + "printer_variant": "1.6", + "nozzle_diameter": [ + "1.6" + ], + "default_print_profile": "0.8mm Draft @Pragostroj 1.6", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle" + ], + "max_layer_height": [ + "1.28" + ], + "min_layer_height": [ + "0.4" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 04 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 04 nozzle.json new file mode 100644 index 0000000000..bc0fce8771 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 04 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 0.4 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "5OdhMXwsOJy1UqUV", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4", + "0.4" + ], + "default_print_profile": "0.2mm Draft @Pragostroj 0.4", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.1" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 05 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 05 nozzle.json new file mode 100644 index 0000000000..7b0b8aff2e --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 05 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 0.5 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "0MYLkJK6xYBT8Ihi", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "0.5", + "nozzle_diameter": [ + "0.5", + "0.5" + ], + "default_print_profile": "0.25mm Draft @Pragostroj 0.5", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.1" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 06 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 06 nozzle.json new file mode 100644 index 0000000000..e21218bd36 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 06 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 0.6 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "9QTAyTkDTKHxENP4", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6", + "0.6" + ], + "default_print_profile": "0.3mm Draft @Pragostroj 0.6", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.48" + ], + "min_layer_height": [ + "0.15" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 08 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 08 nozzle.json new file mode 100644 index 0000000000..b1dcb0ff4e --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 08 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 0.8 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "9GZJdG5Iw1pt59ul", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8", + "0.8" + ], + "default_print_profile": "0.4mm Draft @Pragostroj 0.8", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.64" + ], + "min_layer_height": [ + "0.2" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 10 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 10 nozzle.json new file mode 100644 index 0000000000..6d8331e824 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 10 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 1.0 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "7KmSDXl3zWWxCJss", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "1.0", + "nozzle_diameter": [ + "1.0", + "1.0" + ], + "default_print_profile": "0.5mm Draft @Pragostroj 1.0", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.8" + ], + "min_layer_height": [ + "0.25" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 12 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 12 nozzle.json new file mode 100644 index 0000000000..a501e7fc02 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 12 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 1.2 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "vNQtksa68lUXWwha", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "1.2", + "nozzle_diameter": [ + "1.2", + "1.2" + ], + "default_print_profile": "0.6mm Draft @Pragostroj 1.2", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "0.96" + ], + "min_layer_height": [ + "0.3" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB 2HB 16 nozzle.json b/resources/profiles/Pragostroj/machine/KINARB 2HB 16 nozzle.json new file mode 100644 index 0000000000..2bf1d6fc1a --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB 2HB 16 nozzle.json @@ -0,0 +1,27 @@ +{ + "type": "machine", + "name": "KINARB 2HB 1.6 nozzle", + "inherits": "kinarb_2hb_machine_common", + "from": "system", + "setting_id": "KrwyvkeskgY4yjB5", + "instantiation": "true", + "printer_model": "KINARB 2HB", + "extruders_count": "2", + "nozzle_count": "2", + "printer_variant": "1.6", + "nozzle_diameter": [ + "1.6", + "1.6" + ], + "default_print_profile": "0.8mm Draft @Pragostroj 1.6", + "default_filament_profile": [ + "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle", + "Pragostroj hips @Pragostroj" + ], + "max_layer_height": [ + "1.28" + ], + "min_layer_height": [ + "0.4" + ] +} diff --git a/resources/profiles/Pragostroj/machine/KINARB1HB.json b/resources/profiles/Pragostroj/machine/KINARB1HB.json new file mode 100644 index 0000000000..3500f8e109 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB1HB.json @@ -0,0 +1,11 @@ +{ + "type": "machine_model", + "name": "KINARB 1HB", + "nozzle_diameter": "0.4;0.5;0.6;0.8;1.0;1.2;1.6", + "nozzle_count": "1", + "model_id": "V1", + "family": "Kinarb", + "machine_tech": "FDM", + "default_materials": "Pragostroj PLAP @Pragostroj; Pragostroj hips @Pragostroj; Pragostroj PETG @Pragostroj 0.5 nozzle", + "cover": "KINARB 1HB_cover.png" +} diff --git a/resources/profiles/Pragostroj/machine/KINARB2HB.json b/resources/profiles/Pragostroj/machine/KINARB2HB.json new file mode 100644 index 0000000000..b4884e8578 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/KINARB2HB.json @@ -0,0 +1,11 @@ +{ + "type": "machine_model", + "name": "KINARB 2HB", + "nozzle_diameter": "0.4;0.5;0.6;0.8;1.0;1.2;1.6", + "nozzle_count": "2", + "model_id": "V1", + "family": "Kinarb", + "machine_tech": "FDM", + "default_materials": "Pragostroj PLAP @Pragostroj; Pragostroj hips @Pragostroj; Pragostroj PETG @Pragostroj 0.5 nozzle", + "cover": "KINARB 2HB_cover.png" +} diff --git a/resources/profiles/Pragostroj/machine/fdm_machine_common.json b/resources/profiles/Pragostroj/machine/fdm_machine_common.json new file mode 100644 index 0000000000..3c191f94c4 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/fdm_machine_common.json @@ -0,0 +1,139 @@ +{ + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "gcode_flavor": "reprapfirmware", + "machine_start_gcode": "M109 S[nozzle_temperature_initial_layer]\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0", + "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "500", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "2500", + "20000" + ], + "machine_max_acceleration_x": [ + "2000", + "20000" + ], + "machine_max_acceleration_y": [ + "2000", + "20000" + ], + "machine_max_acceleration_z": [ + "200", + "200" + ], + "machine_max_speed_e": [ + "500", + "25" + ], + "machine_max_speed_x": [ + "200", + "200" + ], + "machine_max_speed_y": [ + "200", + "200" + ], + "machine_max_speed_z": [ + "12", + "12" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "5", + "5" + ], + "machine_max_jerk_y": [ + "5", + "5" + ], + "machine_max_jerk_z": [ + "0.2", + "0.4" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.1" + ], + "printable_height": "500", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140", + "nozzle_diameter": [ + "0.4" + ], + "printer_settings_id": "", + "printer_technology": "FFF", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "1" + ], + "retract_before_wipe": [ + "70%" + ], + "retract_when_changing_layer": [ + "0" + ], + "retraction_length": [ + "1.6" + ], + "retract_length_toolchange": [ + "2" + ], + "z_hop": [ + "0.2" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "45" + ], + "deretraction_speed": [ + "45" + ], + "single_extruder_multi_material": [ + "1" + ], + "change_filament_gcode": "", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "machine_pause_gcode": "M601", + "wipe": [ + "0" + ] +} diff --git a/resources/profiles/Pragostroj/machine/kinarb_2hb_machine_common.json b/resources/profiles/Pragostroj/machine/kinarb_2hb_machine_common.json new file mode 100644 index 0000000000..d8eaa2f1fc --- /dev/null +++ b/resources/profiles/Pragostroj/machine/kinarb_2hb_machine_common.json @@ -0,0 +1,120 @@ +{ + "type": "machine", + "name": "kinarb_2hb_machine_common", + "inherits": "kinarb_machine_common", + "from": "system", + "instantiation": "false", + "extruder_offset": [ + "0x0", + "0x0" + ], + "extruder_colour": [ + "#FCE94F", + "#3465A4" + ], + "retraction_length": [ + "1.6", + "1.6" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retraction_speed": [ + "45", + "45" + ], + "deretraction_speed": [ + "45", + "45" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retract_before_wipe": [ + "70%", + "70%" + ], + "retract_when_changing_layer": [ + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "wipe": [ + "0", + "0" + ], + "wipe_distance": [ + "1", + "1" + ], + "z_hop": [ + "0.2", + "0.2" + ], + "z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "0", + "0" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "travel_slope": [ + "3", + "3" + ], + "single_extruder_multi_material": [ + "0" + ], + "printable_area": [ + "0x0", + "540x0", + "540x450", + "0x450" + ], + "extruder_printable_area": [ + "0x0,540x0,540x450,0x450", + "0x0,540x0,540x450,0x450" + ], + "extruder_printable_height": [ + "500", + "500" + ], + "nozzle_count": "2", + "machine_tool_change_time": "5", + "machine_start_gcode": "; --- DUAL-HEAD START G-CODE (placeholder, please verify with your RRF config) ---\nM104 S[nozzle_temperature_initial_layer_0] T0 ; preheat T0 (no tool select)\nM104 S[nozzle_temperature_initial_layer_1] T1 ; preheat T1 (no tool select)\nM116 ; wait for all temps\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0", + "change_filament_gcode": "; --- TOOL CHANGE (placeholder) ---\nT[next_extruder]\nG92 E0", + "extruders_count": "2", + "parking_pos_retraction": "0", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "extra_loading_move": "0", + "enable_filament_ramming": "0", + "high_current_on_filament_swap": "0", + "purge_in_prime_tower": "0" +} diff --git a/resources/profiles/Pragostroj/machine/kinarb_machine_common.json b/resources/profiles/Pragostroj/machine/kinarb_machine_common.json new file mode 100644 index 0000000000..2fba1bb044 --- /dev/null +++ b/resources/profiles/Pragostroj/machine/kinarb_machine_common.json @@ -0,0 +1,108 @@ +{ + "type": "machine", + "name": "kinarb_machine_common", + "inherits": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "thumbnails": "48x48/PNG, 300x300/PNG", + "thumbnails_format": "PNG", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "cooling_tube_length": "5", + "cooling_tube_retraction": "91.5", + "default_bed_type": "", + "bed_exclude_area": [], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "1", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "-2", + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "duet", + "long_retractions_when_cut": [ + "0" + ], + "machine_load_filament_time": "0", + "machine_max_jerk_x": [ + "10", + "9" + ], + "machine_max_jerk_y": [ + "10", + "9" + ], + "machine_max_junction_deviation": [ + "0", + "0" + ], + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_resonance_avoidance_speed": "120", + "min_resonance_avoidance_speed": "70", + "nozzle_height": "2.5", + "nozzle_hrc": "0", + "nozzle_type": "undefine", + "nozzle_volume": "0", + "parking_pos_retraction": "92", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printable_area": [ + "0x0", + "600x0", + "600x460", + "0x460" + ], + "printer_notes": "", + "printer_structure": "undefine", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "1", + "resonance_avoidance": "0", + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retraction_distances_when_cut": [ + "18" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "0", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe_distance": [ + "1" + ], + "z_hop_types": [ + "Spiral Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Pragostroj/process/0.15mm PETG fine @Pragostroj 0.5.json b/resources/profiles/Pragostroj/process/0.15mm PETG fine @Pragostroj 0.5.json new file mode 100644 index 0000000000..846c094f4a --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.15mm PETG fine @Pragostroj 0.5.json @@ -0,0 +1,73 @@ +{ + "type": "process", + "name": "0.15mm PETG fine @Pragostroj 0.5", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "ajaxOz8Z7HrO03lA", + "instantiation": "true", + "layer_height": "0.15", + "initial_layer_print_height": "0.15", + "line_width": "0.5", + "outer_wall_line_width": "0.5", + "inner_wall_line_width": "0.5", + "internal_solid_infill_line_width": "0.5", + "top_surface_line_width": "0.5", + "sparse_infill_line_width": "0.55", + "support_line_width": "0.5", + "initial_layer_line_width": "0.9", + "brim_type": "outer_only", + "skirt_loops": "2", + "wall_loops": "4", + "wall_sequence": "outer wall/inner wall", + "sparse_infill_pattern": "cubic", + "gap_fill_target": "everywhere", + "enable_arc_fitting": "1", + "ooze_prevention": "1", + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "5", + "slow_down_layers": "3", + "default_acceleration": "2000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "2000", + "top_surface_acceleration": "1000", + "travel_acceleration": "1000", + "default_jerk": "5", + "initial_layer_jerk": "5", + "infill_jerk": "5", + "inner_wall_jerk": "5", + "outer_wall_jerk": "5", + "top_surface_jerk": "5", + "travel_jerk": "5", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "30", + "outer_wall_speed": "50", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "120", + "sparse_infill_speed": "150", + "top_surface_speed": "80", + "gap_infill_speed": "50", + "travel_speed": "300", + "enable_support": "1", + "support_type": "tree(auto)", + "support_threshold_angle": "45", + "support_speed": "120", + "support_interface_speed": "30", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_object_xy_distance": "0.6", + "support_filament": "1", + "support_interface_filament": "1", + "support_interface_pattern": "concentric", + "support_interface_spacing": "0", + "support_bottom_interface_spacing": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "3", + "independent_support_layer_height": "0", + "raft_layers": "4", + "raft_contact_distance": "0.15", + "raft_first_layer_density": "100%", + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.25mm Draft @Pragostroj 0.5.json b/resources/profiles/Pragostroj/process/0.25mm Draft @Pragostroj 0.5.json new file mode 100644 index 0000000000..b107e35e3d --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.25mm Draft @Pragostroj 0.5.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.25mm Draft @Pragostroj 0.5", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "rYXaH0o5vjuffPPn", + "instantiation": "true", + "layer_height": "0.25", + "initial_layer_print_height": "0.25", + "line_width": "0.5", + "outer_wall_line_width": "0.5", + "inner_wall_line_width": "0.5", + "internal_solid_infill_line_width": "0.5", + "top_surface_line_width": "0.5", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.5", + "bottom_shell_thickness": "0.5", + "top_shell_thickness": "1.5", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.25mm PP Draft @Pragostroj 0.5.json b/resources/profiles/Pragostroj/process/0.25mm PP Draft @Pragostroj 0.5.json new file mode 100644 index 0000000000..76dbe41438 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.25mm PP Draft @Pragostroj 0.5.json @@ -0,0 +1,70 @@ +{ + "type": "process", + "name": "0.25mm PP Draft @Pragostroj 0.5", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "uotzhmSKiQosuOpK", + "instantiation": "true", + "layer_height": "0.25", + "initial_layer_print_height": "0.25", + "line_width": "0.5", + "outer_wall_line_width": "0.5", + "inner_wall_line_width": "0.5", + "internal_solid_infill_line_width": "0.5", + "top_surface_line_width": "0.5", + "sparse_infill_line_width": "0.5", + "support_line_width": "0.5", + "initial_layer_line_width": "0.65", + "brim_type": "no_brim", + "skirt_loops": "2", + "wall_sequence": "outer wall/inner wall", + "sparse_infill_density": "5%", + "gap_fill_target": "everywhere", + "enable_arc_fitting": "1", + "ooze_prevention": "1", + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "5", + "slow_down_layers": "3", + "default_acceleration": "3000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "2000", + "travel_acceleration": "2000", + "default_jerk": "5", + "initial_layer_jerk": "5", + "infill_jerk": "5", + "inner_wall_jerk": "5", + "outer_wall_jerk": "5", + "top_surface_jerk": "5", + "travel_jerk": "5", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "30", + "outer_wall_speed": "50", + "inner_wall_speed": "60", + "internal_solid_infill_speed": "50", + "sparse_infill_speed": "60", + "top_surface_speed": "50", + "gap_infill_speed": "50", + "travel_speed": "300", + "enable_support": "1", + "support_threshold_angle": "45", + "support_speed": "50", + "support_interface_speed": "30", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_object_xy_distance": "0.6", + "support_filament": "1", + "support_interface_filament": "1", + "support_interface_pattern": "concentric", + "support_interface_spacing": "0", + "support_bottom_interface_spacing": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "3", + "independent_support_layer_height": "0", + "raft_layers": "4", + "raft_contact_distance": "0.25", + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5 - 100mms.json b/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5 - 100mms.json new file mode 100644 index 0000000000..f9324cc0f7 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5 - 100mms.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.25mm quality @Pragostroj 0.5 - 100mms", + "inherits": "0.25mm quality @Pragostroj 0.5", + "from": "system", + "setting_id": "nyKu5sqYzWCtSZhD", + "instantiation": "true", + "brim_type": "outer_only", + "default_acceleration": "2000", + "default_jerk": "5", + "initial_layer_jerk": "5", + "infill_jerk": "5", + "inner_wall_jerk": "5", + "outer_wall_jerk": "5", + "top_surface_jerk": "5", + "travel_jerk": "5", + "gap_infill_speed": "100", + "initial_layer_infill_speed": "30", + "inner_wall_speed": "100", + "outer_wall_speed": "100", + "internal_solid_infill_speed": "100", + "sparse_infill_speed": "100", + "support_speed": "100", + "top_surface_speed": "100", + "independent_support_layer_height": "0", + "support_bottom_z_distance": "0.4", + "support_top_z_distance": "0.6", + "support_on_build_plate_only": "0", + "support_style": "default", + "tree_support_wall_count": "2", + "wall_loops": "3", + "compatible_printers": [ + "KINARB 1HB 0.5 nozzle", + "KINARB 2HB 0.5 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5.json b/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5.json new file mode 100644 index 0000000000..51c1e309f2 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.25mm quality @Pragostroj 0.5.json @@ -0,0 +1,30 @@ +{ + "type": "process", + "name": "0.25mm quality @Pragostroj 0.5", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "BHxfmm9Dw2Thb8Tq", + "instantiation": "true", + "bottom_shell_thickness": "0.5", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "internal_solid_infill_line_width": "0.5", + "layer_height": "0.25", + "line_width": "0.5", + "outer_wall_line_width": "0.5", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.5", + "thick_bridges": "1", + "top_shell_thickness": "1.2", + "top_surface_line_width": "0.5", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1" +} diff --git a/resources/profiles/Pragostroj/process/0.2mm Draft @Pragostroj 0.4.json b/resources/profiles/Pragostroj/process/0.2mm Draft @Pragostroj 0.4.json new file mode 100644 index 0000000000..d97586dd57 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.2mm Draft @Pragostroj 0.4.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.2mm Draft @Pragostroj 0.4", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "DnxEaeXfPHl4FCyQ", + "instantiation": "true", + "layer_height": "0.2", + "initial_layer_print_height": "0.2", + "line_width": "0.4", + "outer_wall_line_width": "0.4", + "inner_wall_line_width": "0.4", + "internal_solid_infill_line_width": "0.4", + "top_surface_line_width": "0.4", + "sparse_infill_line_width": "0.48", + "support_line_width": "0.4", + "bottom_shell_thickness": "0.4", + "top_shell_thickness": "1.2", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 0.4 nozzle", + "KINARB 2HB 0.4 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.3mm Draft @Pragostroj 0.6.json b/resources/profiles/Pragostroj/process/0.3mm Draft @Pragostroj 0.6.json new file mode 100644 index 0000000000..4a4d0669dc --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.3mm Draft @Pragostroj 0.6.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.3mm Draft @Pragostroj 0.6", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "7McRpzXpjKxZG5Bj", + "instantiation": "true", + "layer_height": "0.3", + "initial_layer_print_height": "0.3", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "top_surface_line_width": "0.6", + "sparse_infill_line_width": "0.72", + "support_line_width": "0.6", + "bottom_shell_thickness": "0.6", + "top_shell_thickness": "1.8", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 0.6 nozzle", + "KINARB 2HB 0.6 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.40mm quality @Pragostroj 0.8.json b/resources/profiles/Pragostroj/process/0.40mm quality @Pragostroj 0.8.json new file mode 100644 index 0000000000..e8ea89ddb6 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.40mm quality @Pragostroj 0.8.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "0.40mm quality @Pragostroj 0.8", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "XLoULnlavbviCcUZ", + "instantiation": "true", + "bottom_shell_thickness": "0.8", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "layer_height": "0.3", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "top_shell_thickness": "1.2", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1" +} diff --git a/resources/profiles/Pragostroj/process/0.4mm Draft @Pragostroj 0.8.json b/resources/profiles/Pragostroj/process/0.4mm Draft @Pragostroj 0.8.json new file mode 100644 index 0000000000..99c765caa9 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.4mm Draft @Pragostroj 0.8.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.4mm Draft @Pragostroj 0.8", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "p9fnYWI05pAMip1O", + "instantiation": "true", + "layer_height": "0.4", + "initial_layer_print_height": "0.4", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "top_surface_line_width": "0.8", + "sparse_infill_line_width": "0.96", + "support_line_width": "0.8", + "bottom_shell_thickness": "0.8", + "top_shell_thickness": "2.4", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.4mm PP Draft @Pragostroj 0.8.json b/resources/profiles/Pragostroj/process/0.4mm PP Draft @Pragostroj 0.8.json new file mode 100644 index 0000000000..c37aedbeec --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.4mm PP Draft @Pragostroj 0.8.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "name": "0.4mm PP Draft @Pragostroj 0.8", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "ISlA6aEVcmZPI3dG", + "instantiation": "true", + "layer_height": "0.4", + "initial_layer_print_height": "0.4", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "top_surface_line_width": "0.8", + "sparse_infill_line_width": "0.85", + "support_line_width": "0.8", + "initial_layer_line_width": "0.9", + "brim_type": "no_brim", + "skirt_distance": "4", + "wall_loops": "2", + "top_shell_layers": "5", + "bottom_shell_layers": "5", + "sparse_infill_pattern": "cubic", + "sparse_infill_density": "10%", + "gap_fill_target": "everywhere", + "bridge_no_support": "1", + "top_solid_infill_flow_ratio": "0.95", + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "10", + "overhang_2_4_speed": "30", + "default_acceleration": "3000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "3000", + "top_surface_acceleration": "2000", + "travel_acceleration": "1000", + "default_jerk": "5", + "initial_layer_jerk": "5", + "infill_jerk": "5", + "inner_wall_jerk": "5", + "outer_wall_jerk": "5", + "top_surface_jerk": "5", + "travel_jerk": "5", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "50", + "outer_wall_speed": "30", + "inner_wall_speed": "30", + "internal_solid_infill_speed": "30", + "sparse_infill_speed": "30", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "enable_support": "1", + "support_threshold_angle": "40", + "support_speed": "80", + "support_interface_speed": "50", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_object_xy_distance": "1", + "support_base_pattern_spacing": "3", + "support_interface_spacing": "0", + "support_bottom_interface_spacing": "1", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "3", + "raft_layers": "3", + "compatible_printers": [ + "KINARB 1HB 0.8 nozzle", + "KINARB 2HB 0.8 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.5mm Draft @Pragostroj 1.0.json b/resources/profiles/Pragostroj/process/0.5mm Draft @Pragostroj 1.0.json new file mode 100644 index 0000000000..035fd01107 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.5mm Draft @Pragostroj 1.0.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.5mm Draft @Pragostroj 1.0", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "V4btYVHhZRsIttOy", + "instantiation": "true", + "layer_height": "0.5", + "initial_layer_print_height": "0.5", + "line_width": "1", + "outer_wall_line_width": "1", + "inner_wall_line_width": "1", + "internal_solid_infill_line_width": "1", + "top_surface_line_width": "1", + "sparse_infill_line_width": "1.2", + "support_line_width": "1", + "bottom_shell_thickness": "1", + "top_shell_thickness": "3", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 1.0 nozzle", + "KINARB 2HB 1.0 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.6mm Draft @Pragostroj 1.2.json b/resources/profiles/Pragostroj/process/0.6mm Draft @Pragostroj 1.2.json new file mode 100644 index 0000000000..5917f7cf06 --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.6mm Draft @Pragostroj 1.2.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.6mm Draft @Pragostroj 1.2", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "EWeIZrCxkPLs8m79", + "instantiation": "true", + "layer_height": "0.6", + "initial_layer_print_height": "0.6", + "line_width": "1.2", + "outer_wall_line_width": "1.2", + "inner_wall_line_width": "1.2", + "internal_solid_infill_line_width": "1.2", + "top_surface_line_width": "1.2", + "sparse_infill_line_width": "1.44", + "support_line_width": "1.2", + "bottom_shell_thickness": "1.2", + "top_shell_thickness": "3.6", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 1.2 nozzle", + "KINARB 2HB 1.2 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/0.8mm Draft @Pragostroj 1.6.json b/resources/profiles/Pragostroj/process/0.8mm Draft @Pragostroj 1.6.json new file mode 100644 index 0000000000..33da44244a --- /dev/null +++ b/resources/profiles/Pragostroj/process/0.8mm Draft @Pragostroj 1.6.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.8mm Draft @Pragostroj 1.6", + "inherits": "process_common_kinarb", + "from": "system", + "setting_id": "seGh6lE18Y6Sx9mL", + "instantiation": "true", + "layer_height": "0.8", + "initial_layer_print_height": "0.8", + "line_width": "1.6", + "outer_wall_line_width": "1.6", + "inner_wall_line_width": "1.6", + "internal_solid_infill_line_width": "1.6", + "top_surface_line_width": "1.6", + "sparse_infill_line_width": "1.92", + "support_line_width": "1.6", + "bottom_shell_thickness": "1.6", + "top_shell_thickness": "4.8", + "bridge_acceleration": "1000", + "bridge_speed": "22", + "infill_anchor": "2.5", + "infill_anchor_max": "20", + "internal_solid_infill_acceleration": "3000", + "raft_contact_distance": "0.2", + "seam_position": "nearest", + "small_perimeter_speed": "30%", + "thick_bridges": "1", + "support_type": "tree(auto)", + "support_style": "tree_slim", + "support_on_build_plate_only": "1", + "tree_support_wall_count": "1", + "compatible_printers": [ + "KINARB 1HB 1.6 nozzle", + "KINARB 2HB 1.6 nozzle" + ] +} diff --git a/resources/profiles/Pragostroj/process/fdm_process_common.json b/resources/profiles/Pragostroj/process/fdm_process_common.json new file mode 100644 index 0000000000..786d040bd8 --- /dev/null +++ b/resources/profiles/Pragostroj/process/fdm_process_common.json @@ -0,0 +1,106 @@ +{ + "type": "process", + "name": "fdm_process_common", + "from": "system", + "instantiation": "false", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_thickness": "0", + "bridge_speed": "50", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [], + "compatible_printers_condition": "", + "print_sequence": "by layer", + "default_acceleration": "3000", + "initial_layer_acceleration": "500", + "top_surface_acceleration": "2000", + "travel_acceleration": "1000", + "inner_wall_acceleration": "3000", + "outer_wall_acceleration": "1000", + "bridge_no_support": "1", + "draft_shield": "disabled", + "elefant_foot_compensation": "0", + "enable_arc_fitting": "0", + "wall_infill_order": "inner wall/outer wall/infill", + "infill_direction": "45", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "cubic", + "initial_layer_print_height": "0.2", + "infill_combination": "0", + "infill_wall_overlap": "25%", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode", + "detect_overhang_wall": "1", + "slowdown_for_curled_perimeters": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "line_width": "0.8", + "inner_wall_line_width": "0.8", + "outer_wall_line_width": "0.8", + "top_surface_line_width": "0.8", + "sparse_infill_line_width": "0.85", + "initial_layer_line_width": "0.9", + "internal_solid_infill_line_width": "0.8", + "support_line_width": "0.8", + "wall_loops": "2", + "print_settings_id": "0.4mm Draft @Pragostroj 0.8", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "4", + "skirt_height": "3", + "min_skirt_length": "4", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "1", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.25", + "support_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "3", + "support_interface_bottom_layers": "3", + "support_interface_spacing": "0", + "support_interface_speed": "50", + "support_base_pattern": "default", + "support_base_pattern_spacing": "3", + "support_speed": "80", + "support_threshold_angle": "30", + "support_object_xy_distance": "1", + "tree_support_branch_angle": "30", + "tree_support_wall_count": "0", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_shell_thickness": "0.8", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "layer_height": "0.4", + "bottom_shell_layers": "5", + "top_shell_layers": "5", + "bridge_flow": "1", + "initial_layer_speed": "30", + "initial_layer_infill_speed": "45", + "outer_wall_speed": "50", + "inner_wall_speed": "80", + "sparse_infill_speed": "80", + "internal_solid_infill_speed": "80", + "top_surface_speed": "80", + "gap_infill_speed": "80", + "travel_speed": "250" +} diff --git a/resources/profiles/Pragostroj/process/process_common_kinarb.json b/resources/profiles/Pragostroj/process/process_common_kinarb.json new file mode 100644 index 0000000000..e4a3e0999d --- /dev/null +++ b/resources/profiles/Pragostroj/process/process_common_kinarb.json @@ -0,0 +1,16 @@ +{ + "type": "process", + "name": "process_common_kinarb", + "inherits": "fdm_process_common", + "from": "system", + "instantiation": "false", + "initial_layer_infill_speed": "80", + "bridge_speed": "25", + "travel_jerk": "9", + "outer_wall_jerk": "7", + "inner_wall_jerk": "7", + "default_jerk": "9", + "internal_bridge_speed": "50", + "initial_layer_acceleration": "700", + "exclude_object": "1" +}