mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 11:53:48 +00:00
Add Afinia 3d printer and update tree_support_tip_diameter option for Tiertime printers (#10705)
Add Afinia 3d printer and update tree_support_tip_diameter option for 0.6 and 0.8 nozzle Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
GuoGeTiertime
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Tiertime ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB00",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Tiertime ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
@@ -30,4 +30,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Tiertime ABS@300HS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "GFSB00",
|
||||
"filament_id": "GFB00_01",
|
||||
"setting_id": "GFSB00",
|
||||
"name": "Tiertime ABS@300HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
@@ -30,4 +30,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -35,4 +35,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -35,4 +35,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -29,4 +29,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -29,4 +29,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -89,4 +89,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -89,4 +89,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -14,4 +14,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -14,4 +14,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic PA-CF",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"filament_id": "GFN98",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
@@ -36,4 +36,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic PA-CF@300HS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN99",
|
||||
"filament_id": "GFN98_02",
|
||||
"setting_id": "GFSN99",
|
||||
"instantiation": "true",
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
@@ -36,4 +36,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic PA",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"filament_id": "GFN99",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
@@ -54,4 +54,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic PA@300HS",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "GFSN98",
|
||||
"filament_id": "GFN99_01",
|
||||
"setting_id": "GFSN98",
|
||||
"instantiation": "true",
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
@@ -54,4 +54,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -77,4 +77,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -77,4 +77,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -38,4 +38,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -38,4 +38,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -83,4 +83,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -83,4 +83,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -68,4 +68,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -68,4 +68,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -56,4 +56,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -56,4 +56,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -32,4 +32,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -32,4 +32,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,4 +11,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -23,4 +23,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -20,4 +20,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"filament_id": "GFU99",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
@@ -18,4 +18,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -3,8 +3,8 @@
|
||||
"name": "Tiertime Generic TPU@300HS",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "GFSR99",
|
||||
"filament_id": "GFU99_01",
|
||||
"setting_id": "GFSR99",
|
||||
"instantiation": "true",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
@@ -18,4 +18,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -50,4 +50,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -45,9 +45,9 @@
|
||||
"170"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Tiertime UP300 HS 0.4 nozzle",
|
||||
"Tiertime UP300 HS 0.4 nozzle",
|
||||
"Tiertime UP600 HS 0.4 nozzle",
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -95,4 +95,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -95,4 +95,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -83,4 +83,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -83,4 +83,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -59,4 +59,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -59,4 +59,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Tiertime PLA",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA00",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Tiertime PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
@@ -33,4 +33,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Tiertime PLA@300HS",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA00",
|
||||
"filament_id": "GFA00_01",
|
||||
"setting_id": "GFSA00",
|
||||
"name": "Tiertime PLA@300HS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
@@ -33,4 +33,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,4 +41,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"Tiertime UP400 Pro 0.8 nozzle",
|
||||
"Tiertime UP310 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -26,4 +26,4 @@
|
||||
"Tiertime UP600 HS 0.6 nozzle",
|
||||
"Tiertime UP600 HS 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -79,4 +79,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -79,4 +79,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -82,4 +82,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -163,4 +163,4 @@
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n;M106 P3 S0\n"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -7,4 +7,4 @@
|
||||
"filament_type": [
|
||||
"EVA"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -76,4 +76,4 @@
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -79,4 +79,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -79,4 +79,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,64 +1,64 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pctg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pctg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -82,4 +82,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -61,4 +61,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -82,4 +82,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -79,4 +79,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -82,4 +82,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -85,4 +85,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -76,4 +76,4 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -88,4 +88,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -11,7 +11,7 @@
|
||||
"23"
|
||||
],
|
||||
"filament_type": [
|
||||
"SBS"
|
||||
"SBS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.02"
|
||||
@@ -82,4 +82,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -76,4 +76,4 @@
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Tiertime UP300 HS 0.4 nozzle",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"name": "Tiertime UP300 HS 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"printer_model": "Tiertime UP300 HS",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
@@ -16,5 +16,6 @@
|
||||
"207x255",
|
||||
"0x255"
|
||||
],
|
||||
|
||||
"printable_height": "230"
|
||||
}
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Tiertime ABS;Tiertime PLA"
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Tiertime UP310 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"name": "Tiertime UP310 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"printer_model": "Tiertime UP310 Pro",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
|
||||
@@ -9,4 +9,4 @@
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Tiertime ABS;Tiertime PLA"
|
||||
}
|
||||
}
|
||||
|
||||
@@ -1,10 +1,10 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Tiertime UP400 Pro 0.4 nozzle",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"name": "Tiertime UP400 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_tiertime_common",
|
||||
"printer_model": "Tiertime UP400 Pro",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
@@ -16,5 +16,6 @@
|
||||
"400x350",
|
||||
"0x350"
|
||||
],
|
||||
|
||||
"printable_height": "380"
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user