FIX:translation of input IP address dialog

JIRA:STUDIO-4418
Change-Id: I65fdfdcd1c0f348bb4b4a07e025aa3d2c5ed9dd3

bbl/i18n/BambuStudio.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1926,13 +1926,13 @@ msgstr ""
 msgid "Max volumetric speed"
 msgstr ""
 
-msgid "\\u2103"
+msgid "℃"
 msgstr ""
 
 msgid "Bed temperature"
 msgstr ""
 
-msgid "mm\\u00B3"
+msgid "mm³"
 msgstr ""
 
 msgid "Start calibration"
@@ -2512,14 +2512,14 @@ msgstr ""
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5342,8 +5342,8 @@ msgstr ""
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 
@@ -6260,9 +6260,15 @@ msgstr ""
 msgid "Where to find your printer's IP and Access Code?"
 msgstr ""
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -6647,6 +6653,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr ""
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr ""
@@ -7332,9 +7343,6 @@ msgstr ""
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-msgid "mm³"
-msgstr ""
-
 msgid "Filament load time"
 msgstr ""
 
@@ -9441,10 +9449,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -9511,9 +9519,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -9617,7 +9622,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -9632,7 +9637,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 

bbl/i18n/de/BambuStudio_de.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2043,14 +2043,14 @@ msgstr "Druckbetttemperatur"
 msgid "Max volumetric speed"
 msgstr "Maximale Volumengeschwindigkeit"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Druckbetttemperatur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Starten"
@@ -2749,14 +2749,14 @@ msgstr "Update fehlgeschlagen."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5747,8 +5747,8 @@ msgstr "Allgemeine Geschäftsbedingungen"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Vielen Dank für den Kauf eines Bambu Lab Geräts. Bevor Sie Ihr Bambu Lab "
@@ -6782,9 +6782,15 @@ msgstr "Zugangscode"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Wo finde ich die IP und den Zugangscode meines Druckers?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7226,6 +7232,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Schichthöhe darf den Düsendurchmesser nicht überschreiten."
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Druckplatte %d: %s unterstützt kein Filament %s"
@@ -8047,9 +8058,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale Wischmenge im Wischturm"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Ladedauer des Filaments"
 
@@ -10454,10 +10462,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10524,9 +10532,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10630,7 +10635,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10645,7 +10650,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -11110,6 +11115,12 @@ msgstr ""
 "Wussten Sie, dass Sie die Festigkeit des Modells durch mehr Wandlinien und "
 "eine höhere Dichte der Füllung verbessern können?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Direktpunktzahl"
 

bbl/i18n/en/BambuStudio_en.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -1995,14 +1995,14 @@ msgstr "Bed Temperature"
 msgid "Max volumetric speed"
 msgstr "Max volumetric speed"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Bed temperature"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Start"
@@ -2677,14 +2677,14 @@ msgstr "Update failed."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5617,8 +5617,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -6621,9 +6621,15 @@ msgstr "Access Code"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Where to find your printer's IP and Access Code?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7044,6 +7050,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Layer height cannot exceed nozzle diameter."
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Plate %d: %s does not support filament %s"
@@ -7850,9 +7861,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge on wipe tower"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament load time"
 
@@ -10203,10 +10211,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10273,9 +10281,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10379,7 +10384,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10394,7 +10399,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10853,6 +10858,12 @@ msgstr ""
 "Did you know that you can use more wall loops and higher sparse infill "
 "density to improve the strength of the model?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Immediately score"
 

bbl/i18n/es/BambuStudio_es.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2031,14 +2031,14 @@ msgstr "Temperatura de la base"
 msgid "Max volumetric speed"
 msgstr "Velocidad volumétrica máxima"
 
-msgid "\\u2103"
-msgstr "\\ u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Temperatura de la base"
 
-msgid "mm\\u00B3"
-msgstr "mm\\ u00b3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Iniciar"
@@ -2729,14 +2729,14 @@ msgstr "Actualización fallida."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5705,8 +5705,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -6730,9 +6730,15 @@ msgstr "Código de acceso"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "¿Dónde puedo encontrar la IP y el código de acceso de la impresora?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7171,6 +7177,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La altura de la capa no puede superar el diámetro de la boquilla"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "La placa %d: %s no admite el filamento %s."
@@ -7994,9 +8005,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purga mínima en la torre de limpieza"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Tiempo de carga de filamento"
 
@@ -10387,10 +10395,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10457,9 +10465,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10563,7 +10568,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10578,7 +10583,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -11038,6 +11043,12 @@ msgstr ""
 "¿Sabía que puede utilizar más bucles de pared y una densidad de relleno "
 "dispersa más alta para mejorar la resistencia del modelo?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\ u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\ u00b3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Immediately score"
 

bbl/i18n/fr/BambuStudio_fr.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2042,14 +2042,14 @@ msgstr "Température du lit"
 msgid "Max volumetric speed"
 msgstr "Vitesse volumétrique maximale"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Température du plateau"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Démarrer"
@@ -2734,14 +2734,14 @@ msgstr "Mise à jour a échoué."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -3243,7 +3243,7 @@ msgid ""
 "You can find it in \"Settings > Network > Connection code\"\n"
 "on the printer, as shown in the figure:"
 msgstr ""
-"Vous pouvez le trouver dans « Paramètres > Réseau > Code de connexion » sur "
+"Vous pouvez le trouver dans \n« Paramètres > Réseau > Code de connexion » sur\n "
 "l'imprimante, comme illustré sur le schéma:"
 
 msgid "Invalid input."
@@ -5732,8 +5732,8 @@ msgstr "Termes et conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Nous vous remercions d'avoir acheté un produit Bambu Lab. Avant d'utiliser "
@@ -6775,9 +6775,15 @@ msgstr "Code d'Accès"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Où trouver l'adresse IP et le code d'accès de votre imprimante ?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7222,6 +7228,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La hauteur de la couche ne peut pas dépasser le diamètre de la buse"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Plaque %d : %s ne prend pas en charge le filament %s"
@@ -8052,9 +8063,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Purge minimale sur la tour de nettoyage"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Temps de chargement du filament"
 
@@ -10464,10 +10472,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10534,9 +10542,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10640,7 +10645,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10655,7 +10660,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -11123,6 +11128,12 @@ msgstr ""
 "Saviez-vous que vous pouvez définir un plus grand nombre de périmètre et une "
 "densité de remplissage plus élevée pour améliorer la résistance du modèle ?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Noter immédiatement"
 

bbl/i18n/hu/BambuStudio_hu.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2026,14 +2026,14 @@ msgstr "Asztalhőmérséklet"
 msgid "Max volumetric speed"
 msgstr "Max. volumetrikus sebesség"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Asztalhőmérséklet"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Start"
@@ -2711,14 +2711,14 @@ msgstr "A frissítés sikertelen."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5671,8 +5671,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -6686,9 +6686,15 @@ msgstr "Hozzáférési kód"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Hol találom a nyomtató IP címét és a hozzáférési kódot?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7129,6 +7135,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "A rétegmagasság nem lehet nagyobb a fúvóka átmérőjénél."
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "%d. tálca: %s nem használható %s filamenttel."
@@ -7940,9 +7951,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimális tisztítás a törlőtoronyban"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament betöltési idő"
 
@@ -10319,10 +10327,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10389,9 +10397,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10495,7 +10500,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10510,7 +10515,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10970,6 +10975,12 @@ msgstr ""
 "Tudtad, hogy több fal vagy nagyobb kitöltés használatával javíthatod a "
 "modell szilárdságát?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Immediately score"
 

bbl/i18n/it/BambuStudio_it.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2029,14 +2029,14 @@ msgstr "Temperatura piano"
 msgid "Max volumetric speed"
 msgstr "Massima velocità volumetrica"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Temperatura piano"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Calibra"
@@ -2725,14 +2725,14 @@ msgstr "Aggiornamento fallito"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5691,8 +5691,8 @@ msgstr "Termini e condizioni"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Grazie per aver acquistato un dispositivo Bambu Lab. Prima di utilizzare il "
@@ -6717,9 +6717,15 @@ msgstr "Codice di accesso"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Dove trovo l'IP e il codice accesso della stampante?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7159,6 +7165,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "L'altezza del layer non può superare il diametro del nozzle."
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Piatto %d: %s non supporta il filamento %s"
@@ -7987,9 +7998,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Spurgo minimo sulla torre di pulitura"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Durata caricamento filamento"
 
@@ -10390,10 +10398,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10460,9 +10468,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10566,7 +10571,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10581,7 +10586,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -11042,6 +11047,12 @@ msgstr ""
 "Sapevate che è possibile utilizzare un maggior numero di anelli a parete e "
 "una maggiore densità riempimento per migliorare la resistenza del modello?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Punteggio immediato"
 

bbl/i18n/ja/BambuStudio_ja.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -1974,14 +1974,14 @@ msgstr "ベッド温度"
 msgid "Max volumetric speed"
 msgstr "最大体積速度"
 
-msgid "\\u2103"
-msgstr "u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "ベッド温度"
 
-msgid "mm\\u00B3"
-msgstr "mmu00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "開始"
@@ -2616,14 +2616,14 @@ msgstr "更新が失敗しました。"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5511,8 +5511,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -6483,9 +6483,15 @@ msgstr "アクセスコード"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "どこでプリンターのIPアドレスとアクセスコードを確認できますか？"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -6896,6 +6902,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "積層ピッチはノズルの直径を超える為設定できません"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "プレート %d: %s がフィラメント %s を使用できません"
@@ -7648,9 +7659,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "プライムタワー上最小フラッシュ量"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "フィラメントロード時間"
 
@@ -9912,10 +9920,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -9982,9 +9990,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10088,7 +10093,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10103,7 +10108,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10534,6 +10539,12 @@ msgstr ""
 "強度の向上\n"
 "壁面層数やインフィルの充填密度を増やして造形強度を向上できます。"
 
+#~ msgid "\\u2103"
+#~ msgstr "u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mmu00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Immediately score"
 

bbl/i18n/ko/BambuStudio_ko.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1983,14 +1983,14 @@ msgstr "베드 온도"
 msgid "Max volumetric speed"
 msgstr "최대 체적 속도"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "베드 온도"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "시작"
@@ -2650,14 +2650,14 @@ msgstr "업데이트 실패"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5570,8 +5570,8 @@ msgstr "이용약관"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Bambu Lab 기기를 구매해 주셔서 감사합니다. Bambu Lab 기기를 사용하기 전에 이"
@@ -6556,9 +6556,15 @@ msgstr "액세스 코드"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "프린터의 IP 및 액세스 코드는 어디서 찾을 수 있습니까?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -6967,6 +6973,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "레이어 높이는 노즐 직경을 초과할 수 없습니다."
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "플레이트 %d: %s은 (는) 필라멘트 %s을 (를) 지원하지 않습니다."
@@ -7747,9 +7758,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "와이프타워에 최소 짜내기"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "필라멘트 로드 시간"
 
@@ -10048,10 +10056,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10118,9 +10126,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10224,7 +10229,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10239,7 +10244,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10695,6 +10700,12 @@ msgstr ""
 "더 많은 벽 루프와 더 높은 내부채움 밀도를 사용하여 모델의 강도를 높일 수 있다"
 "는 사실을 알고 계셨습니까?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "즉시 점수 매기기"
 

bbl/i18n/nl/BambuStudio_nl.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2032,14 +2032,14 @@ msgstr "Bed Temperatuur"
 msgid "Max volumetric speed"
 msgstr "Maximale volumetrische snelheid"
 
-msgid "\\u2103"
-msgstr "\\ u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Printbed temperatuur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Start"
@@ -2725,14 +2725,14 @@ msgstr "Updaten mislukt."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5716,8 +5716,8 @@ msgstr "Terms and Conditions"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Thank you for purchasing a Bambu Lab device. Before using your Bambu Lab "
@@ -6748,9 +6748,15 @@ msgstr "Toegangscode"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Waar vind je het IP-adres en de toegangscode van je printer?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7187,6 +7193,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "De laaghoogte kan niet groter zijn dan de diameter van de nozzle"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Printbed %d: %s ondersteunt filament %s niet."
@@ -8009,9 +8020,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimale filament reiniging op de wipe tower"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Filament laadt tijd"
 
@@ -10412,10 +10420,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10482,9 +10490,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10588,7 +10593,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10603,7 +10608,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -11063,6 +11068,12 @@ msgstr ""
 "Wist je dat je meer wandlussen en een hogere dunne invuldichtheid kunt "
 "gebruiken om de sterkte van het model te verbeteren?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\ u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Immediately score"
 

bbl/i18n/ru/BambuStudio_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: 2023-08-11 09:11+0800\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -2014,14 +2014,14 @@ msgstr "Температура кровати"
 msgid "Max volumetric speed"
 msgstr "Максимальная объемная скорость"
 
-msgid "\\u2103"
-msgstr ""
+msgid "℃"
+msgstr "℃"
 
 msgid "Bed temperature"
 msgstr "Температура кровати"
 
-msgid "mm\\u00B3"
-msgstr ""
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Начать калибровку"
@@ -2711,14 +2711,14 @@ msgstr "Не удалось обновить."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5675,8 +5675,8 @@ msgstr ""
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 
@@ -6672,9 +6672,15 @@ msgstr "Код доступа"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Где найти IP-адрес и код доступа вашего принтера?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr "Тест"
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7103,6 +7109,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Высота слоя не может превышать диаметр сопла"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Плита %d: %s не поддерживает филамент %s"
@@ -7918,9 +7929,6 @@ msgstr "mm³/с"
 msgid "Minimal purge on wipe tower"
 msgstr "Минимальная продувка на очистительной башне"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Время загрузки филамента"
 
@@ -10262,10 +10270,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10332,9 +10340,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10446,9 +10451,12 @@ msgstr "шаг: "
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
+"Введите допустимые значения:\n"
+"начало > 0 шаг > = 0\n"
+"конец > начало + шаг)"
 
 msgid "VFA test"
 msgstr "VFA тест"
@@ -10461,9 +10469,12 @@ msgstr "Конечная скорость: "
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
+"Введите допустимые значения:\n"
+"старт > 10 шагов >= 0\n"
+"конец > начало + шаг)"
 
 msgid "Start retraction length: "
 msgstr "Начальная длина ретракта: "
@@ -10912,30 +10923,9 @@ msgstr ""
 "Знаете ли вы, что для повышения прочности модели можно использовать больше "
 "периметров и более высокую плотность заполнения?"
 
-#~ msgid "℃"
-#~ msgstr "℃"
-
 #~ msgid "Error: IP or Access Code are not correct"
 #~ msgstr "Ошибка: IP или код доступа не верны"
 
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 0 step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Введите допустимые значения:\n"
-#~ "начало > 0 шаг > = 0\n"
-#~ "конец > начало + шаг)"
-
-#~ msgid ""
-#~ "Please input valid values:\n"
-#~ "start > 10 step >= 0\n"
-#~ "end > start + step)"
-#~ msgstr ""
-#~ "Введите допустимые значения:\n"
-#~ "старт > 10 шагов >= 0\n"
-#~ "конец > начало + шаг)"
-
 #~ msgid ""
 #~ "Bed temperature of other layer is lower than bed temperature of initial "
 #~ "layer for more than %d degree centigrade.\n"

bbl/i18n/sv/BambuStudio_sv.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -2010,14 +2010,14 @@ msgstr "Byggplattans temperatur"
 msgid "Max volumetric speed"
 msgstr "Max volymetrisk hastighet"
 
-msgid "\\u2103"
-msgstr "\\u2103"
+msgid "℃"
+msgstr ""
 
 msgid "Bed temperature"
 msgstr "Byggplattans temperatur"
 
-msgid "mm\\u00B3"
-msgstr "mm\\u00B3"
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "Starta"
@@ -2694,14 +2694,14 @@ msgstr "Uppdatering misslyckades."
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -5637,8 +5637,8 @@ msgstr "Villkor och bestämmelser"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "Tack för att du har köpt en Bambu Lab enhet. Innan du använder din Bambu Lab "
@@ -6651,9 +6651,15 @@ msgstr "Behörighetskod: "
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "Var hittar du skrivarens IP- och åtkomstkod?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr ""
+
 msgid "Test"
 msgstr ""
 
+msgid "IP and Access Code Verified! You may close the window"
+msgstr ""
+
 msgid "Connection failed, please double check IP and Access Code"
 msgstr ""
 
@@ -7068,6 +7074,11 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Lagerhöjden kan inte överstiga nozzel diametern"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr ""
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "Plate %d: %s stöder inte filamentet %s"
@@ -7867,9 +7878,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "Minimal purge på wipe torn"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "Inmatningstid för filament"
 
@@ -9135,8 +9143,8 @@ msgid ""
 "interface is Concentric"
 msgstr ""
 "Linje mönster för support gränssnittsytan .Standardmönstret för olösligt "
-"(material) support gränssnittet är Räta medan standardmönstret för lösligt"
-"(material) stödgränssnittet är koncentriskt"
+"(material) support gränssnittet är Räta medan standardmönstret för "
+"lösligt(material) stödgränssnittet är koncentriskt"
 
 msgid "Rectilinear Interlaced"
 msgstr "Rätlinjig sammanflätning"
@@ -10228,10 +10236,10 @@ msgstr ""
 msgid "Printing Parameters"
 msgstr ""
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -10298,9 +10306,6 @@ msgstr ""
 msgid "To Volumetric Speed"
 msgstr ""
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr ""
 
@@ -10404,7 +10409,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10419,7 +10424,7 @@ msgstr ""
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
 
@@ -10878,6 +10883,12 @@ msgstr ""
 "Visste du att du kan använda fler väggslingor och högre gles fyllningstäthet "
 "för att förbättra modellens styrka?"
 
+#~ msgid "\\u2103"
+#~ msgstr "\\u2103"
+
+#~ msgid "mm\\u00B3"
+#~ msgstr "mm\\u00B3"
+
 #~ msgid "Immediately score"
 #~ msgstr "Omedelbar resultat"
 

bbl/i18n/zh_cn/BambuStudio_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-09-12 18:48+0800\n"
+"POT-Creation-Date: 2023-09-13 12:07+0800\n"
 "PO-Revision-Date: 2023-07-07 09:45+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -831,7 +831,7 @@ msgid "Cone"
 msgstr "锥体"
 
 msgid "Disc"
-msgstr "圆盘"
+msgstr "小圆片"
 
 msgid "Bambu Cube"
 msgstr "Bambu方块"
@@ -1948,14 +1948,14 @@ msgstr "热床温度"
 msgid "Max volumetric speed"
 msgstr "最大体积速度"
 
-msgid "\\u2103"
+msgid "℃"
 msgstr ""
 
 msgid "Bed temperature"
 msgstr "床温"
 
-msgid "mm\\u00B3"
-msgstr ""
+msgid "mm³"
+msgstr "mm³"
 
 msgid "Start calibration"
 msgstr "开始"
@@ -2591,14 +2591,14 @@ msgstr "更新失败。"
 
 msgid ""
 "The current chamber temperature or the target chamber temperature exceeds "
-"45\\u2103.In order to avoid extruder clogging,low temperature filament(PLA/"
-"PETG/TPU) is not allowed to be loaded."
+"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
+"TPU) is not allowed to be loaded."
 msgstr ""
 
 msgid ""
 "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
 "avoid extruder clogging,it is not allowed to set the chamber temperature "
-"above 45\\u2103."
+"above 45℃."
 msgstr ""
 
 msgid "Failed to start printing job"
@@ -4088,7 +4088,7 @@ msgid "Details"
 msgstr "详情"
 
 msgid "New printer config available."
-msgstr ""
+msgstr "有新的打印机配置可用。"
 
 msgid "Undo integration failed."
 msgstr "集成取消失败。"
@@ -5057,16 +5057,16 @@ msgid "First layer filament sequence"
 msgstr "首层耗材打印顺序"
 
 msgid "Same as Global"
-msgstr ""
+msgstr "跟随全局"
 
 msgid "Enable"
 msgstr "开启"
 
 msgid "Disable"
-msgstr ""
+msgstr "禁用"
 
 msgid "Spiral Vase"
-msgstr ""
+msgstr "旋转花瓶"
 
 msgid "Same as Global Plate Type"
 msgstr "跟随全局打印板类型"
@@ -5255,7 +5255,7 @@ msgid "Flow Dynamics Calibration"
 msgstr "动态流量校准"
 
 msgid "Click here if you can't connect to the printer"
-msgstr ""
+msgstr "如果您无法连接打印机，请点击这里"
 
 msgid "send completed"
 msgstr "发送完成"
@@ -5469,8 +5469,8 @@ msgstr "用户使用协议"
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
 "device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of Use"
-"(collectively, the \"Terms\"). If you do not comply with or agree to the "
+"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
 "感谢您购买Bambu Lab设备，使用Bambu Lab设备前，请阅读一下条款，单击同意使用您"
@@ -6425,16 +6425,22 @@ msgstr "访问码"
 msgid "Where to find your printer's IP and Access Code?"
 msgstr "在哪里可以找到打印机的IP和访问代码?"
 
+msgid "Step 3: Ping the IP address to check for packet loss and latency."
+msgstr "步骤3，请ping打印机的IP地址，以此检查丢包和延迟。"
+
 msgid "Test"
-msgstr ""
+msgstr "测试"
+
+msgid "IP and Access Code Verified! You may close the window"
+msgstr "IP地址和访问码验证成功！您可以关闭此窗口。"
 
 msgid "Connection failed, please double check IP and Access Code"
-msgstr ""
+msgstr "连接失败，请再次检查IP地址和访问码。"
 
 msgid ""
 "Connection failed! If your IP and Access Code is correct, \n"
 "please move to step 3 for troubleshooting network issues"
-msgstr ""
+msgstr "连接失败！如果您的IP地址和访问码是正确的，\n请查看第三步的提示，以便定位网络问题所在。"
 
 msgid "Model:"
 msgstr "型号："
@@ -6819,6 +6825,11 @@ msgstr "使用了支撑添加器但没有打开支撑。请打开支撑。"
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "层高不能超过喷嘴直径"
 
+msgid ""
+"Layer height cannot exceed the limit in Printer Settings -> Extruder -> "
+"Layer height limits"
+msgstr "层高不能超过打印机设置->挤出机->层高限制中的限制"
+
 #, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s"
 msgstr "盘%d：%s不支持耗材丝 %s"
@@ -7559,9 +7570,6 @@ msgstr "mm³/s"
 msgid "Minimal purge on wipe tower"
 msgstr "擦拭塔上的最小清理量"
 
-msgid "mm³"
-msgstr "mm³"
-
 msgid "Filament load time"
 msgstr "加载耗材丝的时间"
 
@@ -9826,10 +9834,10 @@ msgstr "将打印一份测试模型。在校准之前，请清理打印平台并
 msgid "Printing Parameters"
 msgstr "打印参数"
 
-msgid "- \\u2103"
+msgid "- ℃"
 msgstr ""
 
-msgid " \\u2103"
+msgid " ℃"
 msgstr ""
 
 msgid "Plate Type"
@@ -9899,9 +9907,6 @@ msgstr "从体积速度"
 msgid "To Volumetric Speed"
 msgstr "至体积速度"
 
-msgid "mm\\u00B3/s"
-msgstr ""
-
 msgid "Flow Dynamics Calibration Result"
 msgstr "动态流量校准结果"
 
@@ -10013,12 +10018,9 @@ msgstr "值步长"
 
 msgid ""
 "Please input valid values:\n"
-"start > 0 \\step >= 0\n"
+"start > 0 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"请输入有效值:\n"
-"起始值 > 0 \\值步长 >= 0\n"
-"结束值 > 起始值 + 值步长)"
 
 msgid "VFA test"
 msgstr "VFA测试"
@@ -10031,12 +10033,9 @@ msgstr "结束速度"
 
 msgid ""
 "Please input valid values:\n"
-"start > 10 \\step >= 0\n"
+"start > 10 step >= 0\n"
 "end > start + step)"
 msgstr ""
-"请输入有效值:\n"
-"起始值 > 0 \\值步长 >= 0\n"
-"结束值 > 起始值 + 值步长)"
 
 msgid "Start retraction length: "
 msgstr "起始回抽长度"
@@ -10471,6 +10470,24 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"
 
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 0 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
+#~ msgid ""
+#~ "Please input valid values:\n"
+#~ "start > 10 \\step >= 0\n"
+#~ "end > start + step)"
+#~ msgstr ""
+#~ "请输入有效值:\n"
+#~ "起始值 > 0 \\值步长 >= 0\n"
+#~ "结束值 > 起始值 + 值步长)"
+
 #~ msgid "Invalid nozzle diameter"
 #~ msgstr "非法喷嘴口径"