feat: Filament Track Switch (H2-series O2L-FTS) support

The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.

Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
  and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
  module, and the fun2 capability bit for checking a slice against installed
  hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
  config that persists with the project and restores from a saved 3mf, and
  force both back to false on every project/printer/CLI load path. Live
  device sync is the only thing that sets them true.

GUI:
- Sidebar sync activates the switch from live device state, attributes each
  AMS to the extruder its input track feeds, shows a floating status icon
  (ready / not-calibrated), and surfaces a one-time tip / not-calibrated
  warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
  blocking error when a slice needs dynamic nozzle mapping but the switch is
  missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
  hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
  "AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
  display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
  FeedDirectionDialog when the switch is calibrated.

Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.

src/slic3r/GUI/FilamentGroupPopup.hpp

@@ -3,10 +3,13 @@
 
 #include <wx/bitmap.h>
 #include <wx/bmpbuttn.h>
+#include <wx/sizer.h>
 #include <wx/timer.h>
 #include "libslic3r/PrintConfig.hpp"
 #include "Widgets/PopupWindow.hpp"
 #include "Widgets/Label.hpp"
+#include "Widgets/SwitchButton.hpp"
+#include "Widgets/StaticBox.hpp"
 
 namespace Slic3r { namespace GUI {
 
@@ -42,6 +45,10 @@ private:
     void Init();
     void UpdateButtonStatus(int hover_idx = -1);
     void DrawRoundedCorner(int radius);
+
+    void MakeSmartFilamentSection(wxSizer *top_sizer, int horizontal_margin, int vertical_padding);
+    void UpdateSmartFilamentSection();
+    void OnSmartFilamentToggle(wxCommandEvent &event);
 private:
     FilamentMapMode GetFilamentMapMode() const;
     void SetFilamentMapMode(const FilamentMapMode mode);
@@ -75,6 +82,10 @@ private:
     wxStaticText *wiki_link;
     wxStaticText *video_link;
 
+    StaticBox    *m_smart_filament_panel{nullptr};
+    wxSizerItem  *m_smart_filament_spacer{nullptr};
+    SwitchButton *m_smart_filament_switch{nullptr};
+
     PartPlate* partplate_ref{ nullptr };
     Plater* plater_ref{ nullptr };
 };