juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-08-06 09:37:55 +00:00
Code Issues Packages Projects Releases Wiki Activity

feat: Filament Track Switch (H2-series O2L-FTS) support

Browse Source 
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.

Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
  and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
  module, and the fun2 capability bit for checking a slice against installed
  hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
  config that persists with the project and restores from a saved 3mf, and
  force both back to false on every project/printer/CLI load path. Live
  device sync is the only thing that sets them true.

GUI:
- Sidebar sync activates the switch from live device state, attributes each
  AMS to the extruder its input track feeds, shows a floating status icon
  (ready / not-calibrated), and surfaces a one-time tip / not-calibrated
  warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
  blocking error when a slice needs dynamic nozzle mapping but the switch is
  missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
  hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
  "AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
  display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
  FeedDirectionDialog when the switch is calibrated.

Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
This commit is contained in:
SoftFever
2026-07-09 18:57:05 +08:00
parent 26a0caff96
commit 0d31325df0
38 changed files with 1655 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
src/OrcaSlicer.cpp
View File

@@ -1326,6 +1326,14 @@ int CLI::run(int argc, char **argv)
}
set_temporary_dir(temp_path);
// The Filament Track Switch flags are live-device state with no meaning in headless slicing;
// default both off unless explicitly provided on the command line, so an old 3MF that had
// them enabled still slices without the switch behavior.
if (!m_extra_config.has("has_filament_switcher"))
m_extra_config.set_key_value("has_filament_switcher", new ConfigOptionBool(false));
if (!m_extra_config.has("enable_filament_dynamic_map"))
m_extra_config.set_key_value("enable_filament_dynamic_map", new ConfigOptionBool(false));
m_extra_config.apply(m_config, true);
m_extra_config.normalize_fdm();