From 09184ac5a46deb37f446f352985415a3e6c81e1b Mon Sep 17 00:00:00 2001 From: Eric McCann Date: Wed, 30 Sep 2026 07:41:17 -0400 Subject: [PATCH] Fix U1 profile variant array validation Expand shared filament and process values to their declared variant widths while preserving existing tuning. Bump the Snapmaker bundle version to 02.04.00.22. Validation: Snapmaker profile check passed with zero errors and warnings; verified all expanded entries repeat their original values. Co-authored-by: Codex --- resources/profiles/Snapmaker.json | 2 +- .../filament/Generic PLA @U1 0.4 nozzle.json | 1 + .../filament/Generic PLA @U1 0.6 nozzle.json | 1 + .../filament/Generic PLA @U1 0.8 nozzle.json | 1 + ...Generic PLA High Speed @U1 0.4 nozzle.json | 1 + ...Generic PLA High Speed @U1 0.6 nozzle.json | 1 + ...Generic PLA High Speed @U1 0.8 nozzle.json | 1 + .../Generic PLA-CF @U1 0.4 nozzle.json | 1 + .../Generic PLA-CF @U1 0.6 nozzle.json | 1 + .../Generic PLA-CF @U1 0.8 nozzle.json | 1 + .../Polymaker General PLA Family @U1.json | 2 + .../Polymaker Silk PLA Family @U1.json | 2 + .../Polymaker Tough PLA Family @U1.json | 1 + .../Fiberon ASA-CF08 @Snapmaker U1.json | 1 + .../Fiberon PA12-CF10 @Snapmaker U1.json | 4 + .../Fiberon PA6-CF20 @Snapmaker U1.json | 4 + .../Fiberon PA612-ESD @Snapmaker U1.json | 3 + .../Fiberon PETG-ESD @Snapmaker U1.json | 1 + .../Panchroma PLA @Snapmaker U1.json | 1 + .../PolyLite PETG @Snapmaker U1.json | 1 + ...lyLite PETG Translucent @Snapmaker U1.json | 1 + ...lyLite PLA Pro Metallic @Snapmaker U1.json | 1 + .../Polymaker PLA @Snapmaker U1.json | 1 + .../Snapmaker/filament/Snapmaker ABS @U1.json | 1 + .../filament/Snapmaker ABS Benchy @U1.json | 8 ++ .../Snapmaker/filament/Snapmaker ASA @U1.json | 1 + ...akaway Support For PLA @U1 0.2 nozzle.json | 11 ++ ...akaway Support For PLA @U1 0.6 nozzle.json | 12 ++ ...akaway Support For PLA @U1 0.8 nozzle.json | 10 ++ ...apmaker Breakaway Support For PLA @U1.json | 11 ++ .../Snapmaker PETG HF @U1 0.2 nozzle.json | 4 + .../Snapmaker PETG HF @U1 0.6 nozzle.json | 7 + .../Snapmaker PETG HF @U1 0.8 nozzle.json | 7 + ...maker PETG Translucent @U1 0.2 nozzle.json | 10 ++ ...maker PETG Translucent @U1 0.4 nozzle.json | 9 ++ ...maker PETG Translucent @U1 0.6 nozzle.json | 10 ++ ...maker PETG Translucent @U1 0.8 nozzle.json | 9 ++ .../filament/Snapmaker PETG-CF @U1.json | 1 + .../filament/Snapmaker PLA Basic @U1.json | 27 ++++ ...aker PLA Full Spectrum @U1 0.4 nozzle.json | 23 +++ .../Snapmaker PLA Glow @U1 0.4 nozzle.json | 7 + .../filament/Snapmaker PLA Lite @U1.json | 26 ++++ .../Snapmaker PLA Matte @U1 0.2 nozzle.json | 24 ++++ .../Snapmaker PLA Matte @U1 0.6 nozzle.json | 25 ++++ .../Snapmaker PLA Matte @U1 0.8 nozzle.json | 25 ++++ .../filament/Snapmaker PLA Matte @U1.json | 14 ++ .../Snapmaker PLA Silk @U1 0.2 nozzle.json | 30 ++++ .../Snapmaker PLA Silk @U1 0.6 nozzle.json | 30 ++++ .../Snapmaker PLA Silk @U1 0.8 nozzle.json | 30 ++++ .../filament/Snapmaker PLA Silk @U1.json | 28 ++++ ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json | 6 + ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json | 6 + ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json | 5 + .../filament/Snapmaker PLA SnapSpeed @U1.json | 25 ++++ ...pmaker PLA Translucent @U1 0.2 nozzle.json | 21 +++ ...pmaker PLA Translucent @U1 0.4 nozzle.json | 18 +++ ...pmaker PLA Translucent @U1 0.6 nozzle.json | 18 +++ ...pmaker PLA Translucent @U1 0.8 nozzle.json | 19 +++ .../Snapmaker PLA Wood @U1 0.4 nozzle.json | 9 ++ .../Snapmaker PLA Wood @U1 0.6 nozzle.json | 11 ++ .../Snapmaker PLA Wood @U1 0.8 nozzle.json | 12 ++ .../Snapmaker PLA-CF @U1 0.4 nozzle.json | 8 ++ .../Snapmaker PLA-CF @U1 0.6 nozzle.json | 11 ++ .../Snapmaker PLA-CF @U1 0.8 nozzle.json | 10 ++ .../Snapmaker PVA @U1 0.6 nozzle.json | 11 ++ .../Snapmaker PVA @U1 0.8 nozzle.json | 9 ++ .../Snapmaker/filament/Snapmaker PVA @U1.json | 10 ++ .../Snapmaker/filament/Snapmaker TPE @U1.json | 2 + .../Snapmaker TPU 90A @U1 0.6 nozzle.json | 19 +++ .../Snapmaker TPU 90A @U1 0.8 nozzle.json | 17 +++ .../filament/Snapmaker TPU 90A @U1.json | 16 +++ .../filament/Snapmaker TPU 95A @U1.json | 22 +++ .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json | 17 +++ .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json | 17 +++ .../filament/Snapmaker TPU 95A HF @U1.json | 16 +++ .../filament/Snapmaker TPU High-Flow @U1.json | 5 + ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 21 +++ ...6 Standard @Snapmaker U1 (0.2 nozzle).json | 7 + ...Extra Fine @Snapmaker U1 (0.4 nozzle).json | 7 + ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 21 +++ ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 35 +++++ ...8 Standard @Snapmaker U1 (0.2 nozzle).json | 7 + ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 21 +++ ...0 Standard @Snapmaker U1 (0.2 nozzle).json | 7 + .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json | 7 + ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 35 +++++ ...2 Standard @Snapmaker U1 (0.2 nozzle).json | 7 + ...4 Standard @Snapmaker U1 (0.2 nozzle).json | 7 + ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 35 +++++ ...16 Optimal @Snapmaker U1 (0.4 nozzle).json | 7 + ...8 Standard @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...20 Quality @Snapmaker U1 (0.4 nozzle).json | 7 + ...0 Standard @Snapmaker U1 (0.4 nozzle).json | 7 + ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 7 + ...0 Strength @Snapmaker U1 (0.4 nozzle).json | 7 + ...20 Support @Snapmaker U1 (0.4 nozzle).json | 7 + ... Support W @Snapmaker U1 (0.4 nozzle).json | 7 + ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json | 7 + ...4 Standard @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...4 Standard @Snapmaker U1 (0.8 nozzle).json | 14 ++ ....25 Benchy @Snapmaker U1 (0.4 nozzle).json | 133 ++++++++++++++++++ ...xtra Draft @Snapmaker U1 (0.4 nozzle).json | 7 + ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json | 7 + ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...0 Strength @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...2 Standard @Snapmaker U1 (0.8 nozzle).json | 14 ++ ...6 Standard @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...xtra Draft @Snapmaker U1 (0.6 nozzle).json | 7 + ...0 Standard @Snapmaker U1 (0.8 nozzle).json | 14 ++ ...2 Standard @Snapmaker U1 (0.6 nozzle).json | 14 ++ ...8 Standard @Snapmaker U1 (0.8 nozzle).json | 14 ++ ...6 Standard @Snapmaker U1 (0.8 nozzle).json | 7 + 112 files changed, 1347 insertions(+), 1 deletion(-) diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index afe302529b..14adc77dfc 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.21", + "version": "02.04.00.22", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json index e37b2d5a25..743800b360 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json index 8524f17c21..ba65c7f999 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json index f4887a84ca..73c997dd6b 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json index 31fbc7174c..125a7a8f77 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "18", "18" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json index bb910121f9..5a0c7f73cd 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "18", "18" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json index 45c7bbda54..8826241929 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "18", "18" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json index 6fcd474adc..2be327d2c2 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json index 13a94cd20c..24dd167796 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json index f763ce696e..f354ff4078 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json @@ -18,6 +18,7 @@ "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ + "12", "12" ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json index 171523998a..0086bd4128 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json @@ -12,9 +12,11 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "enable_pressure_advance": [ + "0", "0" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_vendor": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json index aa8d9de628..f022a2f98e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json @@ -18,9 +18,11 @@ "Polymaker" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "nozzle_temperature_range_high": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json index b3ce7b53ea..a7f2a911f7 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json @@ -15,6 +15,7 @@ "1.23" ], "filament_flow_ratio": [ + "0.96", "0.96" ], "filament_vendor": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json index 7117c25419..bd0df7f754 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json @@ -14,6 +14,7 @@ "15" ], "pressure_advance": [ + "0.05", "0.05" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json index 326c972bcb..0b0213973e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json @@ -14,15 +14,19 @@ "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "enable_pressure_advance": [ + "1", "1" ], "pressure_advance": [ + "0.05", "0.05" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json index 3a825179b0..b4f18c6bb3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json @@ -14,15 +14,19 @@ "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "enable_pressure_advance": [ + "1", "1" ], "pressure_advance": [ + "0.08", "0.08" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json index 444a3ca35e..a8b5296826 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json @@ -14,13 +14,16 @@ "15" ], "filament_retraction_length": [ + "1.0", "1.0" ], "filament_z_hop": [ + "0.0", "0.0" ], "description": " ", "enable_pressure_advance": [ + "1", "1" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json index 91a8ccb00f..432d7c36b6 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json @@ -20,6 +20,7 @@ "70" ], "pressure_advance": [ + "0.04", "0.04" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json index acf326d5ca..1c1e32dacb 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json @@ -14,6 +14,7 @@ "15" ], "filament_wipe": [ + "0", "0" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json index e52f876805..467555862c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json @@ -20,6 +20,7 @@ "70" ], "pressure_advance": [ + "0.05", "0.05" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json index 4702dd7ec9..307572f778 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json @@ -20,6 +20,7 @@ "70" ], "pressure_advance": [ + "0.05", "0.05" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json index cabbbe92b2..104d1abb2f 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json @@ -27,6 +27,7 @@ "0" ], "enable_pressure_advance": [ + "0", "0" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json index b8fb82ab72..529ca24bf0 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json @@ -18,6 +18,7 @@ "Direct Drive High Flow" ], "pressure_advance": [ + "0.05", "0.05" ], "filament_notes": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json index 2a4346cc5d..19402cd821 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json @@ -11,6 +11,7 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json index 47460e4c92..113f526b11 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json @@ -24,27 +24,35 @@ "2" ], "filament_deretraction_speed": [ + "55", "55" ], "filament_max_volumetric_speed": [ + "31", "31" ], "filament_retract_when_changing_layer": [ + "0", "0" ], "filament_retraction_length": [ + "0.5", "0.5" ], "filament_z_hop": [ + "0", "0" ], "filament_retraction_speed": [ + "55", "55" ], "filament_wipe": [ + "0", "0" ], "nozzle_temperature": [ + "250", "250" ], "fan_max_speed": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json index 2e27630834..132701bafd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json @@ -11,6 +11,7 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json index 716c9926d1..835cb46246 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json @@ -21,9 +21,11 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ @@ -39,36 +41,45 @@ "1.3" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1", "1" ], "filament_max_volumetric_speed": [ + "0.5", "0.5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "nozzle_temperature_range_low": [ "190" ], "pressure_advance": [ + "0.2", "0.2" ], "textured_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json index 0092f4e870..36b7d88e06 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json @@ -21,21 +21,25 @@ "1.3" ], "filament_flow_ratio": [ + "0.95", "0.95" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ "190" ], "pressure_advance": [ + "0.02", "0.02" ], "textured_plate_temp": [ @@ -51,30 +55,38 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_wipe_distance": [ + "2", "2" ], "filament_cooling_moves": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json index 9d296edafb..a720a9e27c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json @@ -21,9 +21,11 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ @@ -33,33 +35,41 @@ "1.3" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "0.93", "0.93" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "3", "3" ], "filament_retraction_speed": [ + "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ "190" ], "pressure_advance": [ + "0.015", "0.015" ], "textured_plate_temp_initial_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json index 07c100e18d..b93c632c55 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json @@ -15,6 +15,7 @@ "PLA" ], "enable_pressure_advance": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -24,9 +25,11 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ @@ -36,9 +39,11 @@ "4" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1", "1" ], "filament_loading_speed": [ @@ -57,12 +62,15 @@ "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -75,15 +83,18 @@ "65" ], "nozzle_temperature": [ + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", "210" ], "nozzle_temperature_range_low": [ "190" ], "pressure_advance": [ + "0.03", "0.03" ], "textured_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json index c015a5d3df..549fb49ffb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -49,9 +49,11 @@ "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.5", "1.5" ], "filament_start_gcode": [ @@ -67,6 +69,7 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ @@ -98,6 +101,7 @@ "80" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "filament_notes": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json index 1103fb9192..89c53be8aa 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -36,6 +36,7 @@ "\n" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming": [ @@ -48,9 +49,11 @@ "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "2.5", "2.5" ], "filament_start_gcode": [ @@ -60,12 +63,15 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -75,6 +81,7 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json index d1fea8441e..2ff43ed5f6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -33,6 +33,7 @@ "30" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming": [ @@ -45,9 +46,11 @@ "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_start_gcode": [ @@ -57,12 +60,15 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "2", "2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -72,6 +78,7 @@ "80" ], "nozzle_temperature": [ + "245", "245" ], "nozzle_temperature_initial_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json index 51725376e7..22b2f18955 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json @@ -17,9 +17,11 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ @@ -38,12 +40,14 @@ "1.25" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_loading_speed": [ "28" ], "filament_max_volumetric_speed": [ + "1", "1" ], "filament_minimal_purge_on_wipe_tower": [ @@ -59,15 +63,19 @@ "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "50", "50" ], "filament_unloading_speed": [ @@ -77,12 +85,14 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json index 0bec924fdd..db05ae3bc1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json @@ -14,9 +14,11 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ @@ -32,6 +34,7 @@ "24.99" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_loading_speed": [ @@ -50,12 +53,15 @@ "5" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -65,15 +71,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ + "250", "250" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json index 0f2a565897..69702eb4a1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json @@ -14,9 +14,11 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ @@ -32,15 +34,18 @@ "1.25" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "16", "16" ], "hot_plate_temp": [ "80" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ @@ -81,12 +86,15 @@ "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_unloading_speed": [ @@ -96,9 +104,11 @@ "100" ], "filament_wipe_distance": [ + "2", "2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json index d8cffc3787..39989ccc7d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json @@ -14,9 +14,11 @@ "3" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_max_speed": [ @@ -32,15 +34,18 @@ "1.25" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_max_volumetric_speed": [ + "16", "16" ], "hot_plate_temp": [ "80" ], "nozzle_temperature_initial_layer": [ + "250", "250" ], "nozzle_temperature_range_low": [ @@ -81,12 +86,15 @@ "10" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -96,6 +104,7 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json index e58dd27968..174e0f9d29 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json @@ -58,6 +58,7 @@ "18" ], "filament_retract_length_toolchange": [ + "nil", "nil" ], "pressure_advance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json index cb6d5bd046..8c970ef1c4 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -50,12 +56,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -83,6 +91,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -92,6 +101,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -104,9 +114,11 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ @@ -128,33 +140,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -191,15 +213,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -227,6 +253,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json index e58ce8df61..a03c3e6b9d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -39,6 +44,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,6 +57,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -85,6 +92,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -94,6 +102,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -106,9 +115,11 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ @@ -130,6 +141,7 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ @@ -137,21 +149,27 @@ "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ @@ -159,9 +177,11 @@ "0.5" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -198,12 +218,15 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json index fa22f4812d..fe10c56d81 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json @@ -15,9 +15,11 @@ "100" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cooling_final_speed": [ @@ -59,12 +61,15 @@ "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -74,9 +79,11 @@ "100" ], "filament_z_hop": [ + "0.2", "0.2" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json index 8e5c511b1b..fb56f3c5bd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,12 +59,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "1", "1" ], "eng_plate_temp": [ @@ -86,6 +94,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -95,6 +104,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ @@ -107,9 +117,11 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ @@ -131,30 +143,39 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -191,15 +212,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -227,6 +252,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json index ab7b23a405..b02152df2f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.2 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -87,6 +94,7 @@ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_multitool_ramming": [ @@ -99,30 +107,39 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "2", "2" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_shrink": [ @@ -150,12 +167,15 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -204,6 +224,7 @@ "40" ], "filament_max_volumetric_speed": [ + "2", "2" ], "hot_plate_temp": [ @@ -231,6 +252,7 @@ "2" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ @@ -253,6 +275,7 @@ "4" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_stamping_distance": [ @@ -265,6 +288,7 @@ "100" ], "filament_z_hop_types": [ + "nil", "nil" ], "nozzle_temperature": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json index c4cf484227..abc1877f4d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.6 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -78,6 +85,7 @@ "1.26" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -90,9 +98,11 @@ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ @@ -108,33 +118,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -162,15 +182,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -253,6 +277,7 @@ "10" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_stamping_distance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json index 41548165b6..e9ab4bade2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.8 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -91,9 +98,11 @@ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ @@ -109,30 +118,39 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_shrink": [ @@ -160,15 +178,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "full_fan_speed_layer": [ @@ -239,6 +261,7 @@ "2" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_loading_speed": [ @@ -254,9 +277,11 @@ "10" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_stamping_distance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json index b97e9dbba4..1ef9e20fa2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -43,6 +48,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -55,6 +61,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -108,6 +115,7 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ @@ -133,18 +141,23 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ @@ -152,6 +165,7 @@ "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json index 18de9edada..abb41b2196 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.2 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -42,6 +47,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,12 +57,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -75,6 +83,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -84,12 +93,14 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "1.02", "1.02" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ @@ -111,33 +122,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -165,15 +186,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -246,9 +271,11 @@ "3" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -267,12 +294,15 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json index 3526a1c871..deb6ce4833 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.6 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -42,6 +47,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,12 +57,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -75,6 +83,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -84,12 +93,14 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ @@ -111,33 +122,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -165,15 +186,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -246,9 +271,11 @@ "3" ], "filament_max_volumetric_speed": [ + "10", "10" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -267,12 +294,15 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json index 7e11c05252..188fe678c9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.8 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -42,6 +47,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -51,12 +57,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -75,6 +83,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -84,12 +93,14 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ @@ -111,33 +122,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -165,15 +186,19 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -246,9 +271,11 @@ "3" ], "filament_max_volumetric_speed": [ + "10", "10" ], "filament_retraction_length": [ + "0.4", "0.4" ], "filament_stamping_distance": [ @@ -267,12 +294,15 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json index acd1c82116..6dfb87b84b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json @@ -12,21 +12,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -43,6 +48,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -52,12 +58,14 @@ "60" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -76,6 +84,7 @@ "1.32" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -85,12 +94,14 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.98", "0.98" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ @@ -112,33 +123,43 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -166,12 +187,15 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ @@ -252,6 +276,7 @@ "12" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_stamping_distance": [ @@ -270,12 +295,15 @@ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "pressure_advance": [ + "0.015", "0.015" ], "filament_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json index 842d5fee73..4138a54e34 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json @@ -7,24 +7,30 @@ "setting_id": "jsAgNNiUC6DoO7rz", "instantiation": "true", "filament_deretraction_speed": [ + "30", "30" ], "filament_flow_ratio": [ + "1.01", "1.01" ], "filament_max_volumetric_speed": [ + "2", "2" ], "filament_multitool_ramming_flow": [ "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_speed": [ + "30", "30" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json index 81b67fee51..18aefb2ecd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json @@ -11,24 +11,30 @@ "Snapmaker U1 (0.6 High Flow nozzle)" ], "filament_deretraction_speed": [ + "30", "30" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_multitool_ramming_flow": [ "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.6", "1.6" ], "filament_retraction_speed": [ + "30", "30" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "textured_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json index 1654724651..1dacec6c8e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.8 High Flow nozzle)" ], "filament_deretraction_speed": [ + "30", "30" ], "filament_multitool_ramming_flow": [ "30" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "1.6", "1.6" ], "filament_retraction_speed": [ + "30", "30" ], "nozzle_temperature": [ + "215", "215" ], "pressure_advance": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json index 98e2cb5877..1d4bb8ae38 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -50,6 +56,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -84,6 +91,7 @@ "1.24" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_diameter": [ @@ -93,6 +101,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.966", "0.966" ], "filament_is_support": [ @@ -105,6 +114,7 @@ "50" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ @@ -131,36 +141,47 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -197,15 +218,19 @@ "Snapmaker" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json index 2e2732dbd5..3505f346af 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.2 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -41,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -93,6 +100,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "1.02", "1.02" ], "filament_is_support": [ @@ -105,9 +113,11 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "1.6", "1.6" ], "filament_minimal_purge_on_wipe_tower": [ @@ -129,27 +139,35 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -186,12 +204,15 @@ "Snapmaker" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "1", "1" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json index 87cbfc8ed8..80fd2f2dfb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -41,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -89,6 +96,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_is_support": [ @@ -101,9 +109,11 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ @@ -125,24 +135,31 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.2", "0.2" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -179,6 +196,7 @@ "Snapmaker" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json index b9320cf13b..38c7df86ac 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.6 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -41,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -102,9 +109,11 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ @@ -126,27 +135,35 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "0.5", "0.5" ], "filament_retraction_speed": [ + "50", "50" ], "filament_shrink": [ @@ -183,6 +200,7 @@ "Snapmaker" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json index c9f55207ca..05425cc8ea 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.8 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -41,6 +46,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -53,6 +59,7 @@ "0" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -93,6 +100,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ + "0.95", "0.95" ], "filament_is_support": [ @@ -105,9 +113,11 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ @@ -129,27 +139,35 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ + "0%", "0%" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_shrink": [ @@ -186,6 +204,7 @@ "Snapmaker" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json index 6ba340e303..528f6a8075 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json @@ -39,6 +39,7 @@ "65" ], "filament_flow_ratio": [ + "0.97", "0.97" ], "filament_max_volumetric_speed": [ @@ -56,6 +57,7 @@ "6" ], "filament_retraction_length": [ + "0.6", "0.6" ], "pressure_advance": [ @@ -66,12 +68,14 @@ "4" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -81,21 +85,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json index 8401fb7635..fa527b2520 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json @@ -43,6 +43,7 @@ "65" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_multitool_ramming_flow": [ @@ -52,9 +53,11 @@ "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "pressure_advance": [ @@ -68,15 +71,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -86,21 +92,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json index b645dd168a..808ab849b3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json @@ -43,9 +43,11 @@ "65" ], "filament_flow_ratio": [ + "0.965", "0.965" ], "filament_max_volumetric_speed": [ + "20", "20" ], "filament_multitool_ramming_flow": [ @@ -55,9 +57,11 @@ "10" ], "filament_retract_length_toolchange": [ + "5", "5" ], "filament_retraction_length": [ + "0.4", "0.4" ], "pressure_advance": [ @@ -71,15 +75,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -89,21 +96,26 @@ "35" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "nozzle_temperature": [ + "220", "220" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json index 98db5dbfbb..1f0a2d2fa3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -61,9 +61,11 @@ "PLA-CF" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ @@ -85,12 +87,14 @@ "0.02" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -100,18 +104,22 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json index 41f7688d01..9b720b69b0 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json @@ -43,6 +43,7 @@ "65" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ @@ -52,15 +53,18 @@ "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "2", "2" ], "filament_type": [ "PLA-CF" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ @@ -91,15 +95,18 @@ "8" ], "filament_wipe_distance": [ + "2", "2" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -109,15 +116,19 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json index a589a22a83..641f0ac199 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json @@ -43,6 +43,7 @@ "65" ], "filament_max_volumetric_speed": [ + "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ @@ -52,15 +53,18 @@ "5" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "3", "3" ], "filament_type": [ "PLA-CF" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ @@ -91,12 +95,14 @@ "8" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -106,15 +112,19 @@ "45" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json index c8899e0fcc..a1be5a1146 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json @@ -17,15 +17,18 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_cost": [ "79.98" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ @@ -33,36 +36,44 @@ "0.9506" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_minimum_travel": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_soluble": [ "1" ], "filament_wipe_distance": [ + "2", "2" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", "230" ], "nozzle_temperature_range_low": [ "210" ], "pressure_advance": [ + "0.03", "0.03" ], "slow_down_layer_time": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json index 0be4a98af7..2bbe8d07e4 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json @@ -17,9 +17,11 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ @@ -29,6 +31,7 @@ "79.98" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ @@ -36,12 +39,15 @@ "0.9312" ], "filament_retract_length_toolchange": [ + "10", "10" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_soluble": [ @@ -51,15 +57,18 @@ "65" ], "nozzle_temperature": [ + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", "225" ], "nozzle_temperature_range_low": [ "205" ], "pressure_advance": [ + "0.03", "0.03" ], "slow_down_layer_time": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json index a84579c6aa..c903cfc491 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json @@ -11,12 +11,14 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "enable_pressure_advance": [ + "1", "1" ], "nozzle_temperature_range_high": [ "240" ], "pressure_advance": [ + "0.03", "0.03" ], "additional_cooling_fan_speed": [ @@ -26,9 +28,11 @@ "1" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "fan_min_speed": [ @@ -44,6 +48,7 @@ "4" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_loading_speed": [ @@ -66,6 +71,7 @@ "0.1" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ @@ -73,6 +79,7 @@ "0.6" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_unloading_speed": [ @@ -82,15 +89,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", "240" ], "slow_down_layer_time": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json index 7860c778f9..9eed42efe7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json @@ -21,12 +21,14 @@ "65" ], "filament_flow_ratio": [ + "1.1", "1.1" ], "filament_density": [ "1.22" ], "filament_max_volumetric_speed": [ + "7.2", "7.2" ], "fan_max_speed": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json index 4f6e935751..51aec20d5c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json @@ -8,6 +8,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "compatible_printers": [ @@ -27,42 +28,52 @@ "0.1" ], "pressure_advance": [ + "0.02", "0.02" ], "additional_cooling_fan_speed": [ "100" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_deretraction_speed": [ + "20", "20" ], "filament_flow_ratio": [ + "1.093", "1.093" ], "filament_multitool_ramming_flow": [ "5" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ + "0.6", "0.6" ], "filament_retraction_speed": [ + "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "slow_down_layer_time": [ @@ -72,15 +83,19 @@ "240" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "filament_wipe": [ + "1", "1" ], "filament_wipe_distance": [ + "0", "0" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -108,18 +123,22 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json index 005cf1bf08..8def2c08da 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json @@ -8,6 +8,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.5", "3.5" ], "compatible_printers": [ @@ -27,39 +28,49 @@ "0.1" ], "pressure_advance": [ + "0.02", "0.02" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "filament_deretraction_speed": [ + "20", "20" ], "filament_flow_ratio": [ + "1.095", "1.095" ], "filament_multitool_ramming_flow": [ "5" ], "filament_retract_length_toolchange": [ + "4", "4" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_speed": [ + "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "220", "220" ], "nozzle_temperature_initial_layer": [ + "220", "220" ], "slow_down_layer_time": [ @@ -69,9 +80,11 @@ "240" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -99,18 +112,22 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json index 6579347154..aeea4cc694 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json @@ -8,6 +8,7 @@ "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "compatible_printers": [ @@ -27,45 +28,55 @@ "0.1" ], "pressure_advance": [ + "0.4", "0.4" ], "additional_cooling_fan_speed": [ "100" ], "complete_print_exhaust_fan_speed": [ + "100", "100" ], "during_print_exhaust_fan_speed": [ + "100", "100" ], "filament_deretraction_speed": [ + "15", "15" ], "filament_flow_ratio": [ + "1.045", "1.045" ], "filament_multitool_ramming_flow": [ "5" ], "filament_retract_length_toolchange": [ + "2", "2" ], "filament_retraction_length": [ + "1.2", "1.2" ], "filament_retraction_speed": [ + "15", "15" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "230", "230" ], "slow_down_layer_time": [ "14" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ @@ -93,21 +104,26 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json index af1137ccca..f7b73ac74f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json @@ -11,21 +11,26 @@ "Snapmaker U1 (0.4 High Flow nozzle)" ], "activate_air_filtration": [ + "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ + "0", "0" ], "adaptive_pressure_advance_bridges": [ + "0", "0" ], "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ + "0", "0" ], "chamber_temperature": [ @@ -38,6 +43,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "80", "80" ], "cool_plate_temp": [ @@ -50,12 +56,14 @@ "0" ], "during_print_exhaust_fan_speed": [ + "60", "60" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ + "0", "0" ], "eng_plate_temp": [ @@ -89,6 +97,7 @@ "1.24" ], "filament_deretraction_speed": [ + "8", "8" ], "filament_diameter": [ @@ -107,9 +116,11 @@ "3" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "3.2", "3.2" ], "filament_multitool_ramming": [ @@ -128,21 +139,27 @@ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_lift_above": [ + "nil", "nil" ], "filament_retract_lift_below": [ + "nil", "nil" ], "filament_retract_lift_enforce": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_retraction_length": [ + "1.4", "1.4" ], "filament_retraction_speed": [ + "30", "30" ], "filament_shrink": [ @@ -179,9 +196,11 @@ "Snapmaker" ], "filament_z_hop": [ + "0.4", "0.4" ], "filament_z_hop_types": [ + "Auto Lift", "Auto Lift" ], "full_fan_speed_layer": [ @@ -197,9 +216,11 @@ "0" ], "nozzle_temperature": [ + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", "225" ], "overhang_fan_speed": [ @@ -212,6 +233,7 @@ "0.4157" ], "pressure_advance": [ + "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json index b3d48fd8dd..6d23763c95 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json @@ -33,39 +33,48 @@ "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.067", "1.067" ], "filament_max_volumetric_speed": [ + "12", "12" ], "filament_multitool_ramming_flow": [ "10" ], "filament_retract_length_toolchange": [ + "8", "8" ], "filament_retraction_length": [ + "0.8", "0.8" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "215", "215" ], "nozzle_temperature_initial_layer": [ + "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ + "0.14", "0.14" ], "slow_down_layer_time": [ @@ -75,15 +84,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -93,6 +105,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -105,18 +118,22 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json index f72a73a7dc..b834aaeed8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json @@ -33,39 +33,48 @@ "100" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.045", "1.045" ], "filament_max_volumetric_speed": [ + "16", "16" ], "filament_multitool_ramming_flow": [ "15" ], "filament_retract_length_toolchange": [ + "8", "8" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "215", "215" ], "nozzle_temperature_initial_layer": [ + "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ + "0.12", "0.12" ], "slow_down_layer_time": [ @@ -75,15 +84,18 @@ "100" ], "filament_z_hop_types": [ + "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -93,6 +105,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -105,18 +118,22 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json index f91214894c..63905a89c3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json @@ -33,48 +33,58 @@ "10" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_flow_ratio": [ + "1.067", "1.067" ], "filament_max_volumetric_speed": [ + "9", "9" ], "filament_multitool_ramming_flow": [ "10" ], "filament_retract_length_toolchange": [ + "6", "6" ], "filament_retraction_length": [ + "1", "1" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ + "230", "230" ], "overhang_fan_threshold": [ "25%" ], "pressure_advance": [ + "0.23", "0.23" ], "slow_down_layer_time": [ "10" ], "activate_air_filtration": [ + "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -84,6 +94,7 @@ "30" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "eng_plate_temp": [ @@ -96,21 +107,26 @@ "20" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "hot_plate_temp": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json index 949a230b9f..6dce65a512 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json @@ -16,18 +16,23 @@ "Snapmaker U1 (0.8 High Flow nozzle)" ], "filament_flow_ratio": [ + "0.983", "0.983" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_max_volumetric_speed": [ + "7.6", "7.6" ], "filament_retraction_length": [ + "0.8", "0.8" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_notes": [ diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 47dc63e06d..73cee4710b 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -8,10 +8,24 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "elefant_foot_compensation": "0.15", "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -36,6 +50,13 @@ "prime_tower_width": "30", "prime_volume": "13.5", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 710f8d2547..98f28fe3d5 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -19,6 +19,13 @@ "prime_tower_width": "30", "prime_volume": "13.5", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index 821225907e..8f8d3aa158 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,13 @@ "prime_tower_width": "30", "prime_volume": "18", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index bff8ea47e6..1ae8b8aba2 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -8,10 +8,24 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "elefant_foot_compensation": "0.15", "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -36,6 +50,13 @@ "prime_tower_width": "30", "prime_volume": "18", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index 8b12c1409d..6ba52ed409 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -8,9 +8,23 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "gap_infill_speed": [ + "210", + "210", + "210", + "210", + "210", + "210", + "210", "210" ], "inner_wall_speed": [ @@ -34,6 +48,13 @@ "600" ], "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -58,6 +79,13 @@ "600" ], "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", "150" ], "compatible_printers": [ @@ -68,6 +96,13 @@ "prime_tower_width": "30", "prime_volume": "18", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index fc2378404f..0d17be8403 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -19,6 +19,13 @@ "prime_tower_width": "30", "prime_volume": "18", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index 80a6b49330..d4b6f44745 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -8,10 +8,24 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "elefant_foot_compensation": "0.15", "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -36,6 +50,13 @@ "prime_tower_width": "28", "prime_volume": "25", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index 8bd076ec2c..e6486cee9b 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -26,6 +26,13 @@ "wipe_tower_extra_spacing": "120%", "wipe_tower_wall_type": "rib", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "print_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index 5b82a0021a..f72b90e84b 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -13,6 +13,13 @@ ], "ooze_prevention": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index 7de2bca333..d4a347bc1f 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -8,9 +8,23 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "gap_infill_speed": [ + "230", + "230", + "230", + "230", + "230", + "230", + "230", "230" ], "inner_wall_speed": [ @@ -34,6 +48,13 @@ "600" ], "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -58,6 +79,13 @@ "600" ], "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", "150" ], "compatible_printers": [ @@ -67,6 +95,13 @@ "prime_tower_width": "30", "prime_volume": "27", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index 20f1c91813..c1108faea3 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -19,6 +19,13 @@ "prime_tower_width": "28", "prime_volume": "27", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index 294b1329f3..5735194c70 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -19,6 +19,13 @@ "prime_tower_width": "30", "prime_volume": "32", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index 8ecdd89b6e..5126a45f91 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -8,9 +8,23 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", "4000" ], "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250", "250" ], "inner_wall_speed": [ @@ -34,6 +48,13 @@ "600" ], "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", "2000" ], "outer_wall_speed": [ @@ -58,6 +79,13 @@ "600" ], "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", "150" ], "compatible_printers": [ @@ -68,6 +96,13 @@ "prime_tower_width": "30", "prime_volume": "36", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index bca9e8d7fb..c5f4c492da 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,13 @@ "prime_tower_width": "30", "prime_volume": "36", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index b2c06523ac..c9a5216347 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "layer_height": "0.25", @@ -29,6 +36,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json index 87a70ad4bb..701b719713 100644 --- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json @@ -14,6 +14,13 @@ "ooze_prevention": "1", "prime_tower_width": "30", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 532737eb20..75b4c935d5 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,13 @@ "prime_tower_width": "30", "prime_volume": "45", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json index d605622b96..8dcbb68fa5 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "ooze_prevention": "1", "prime_tower_width": "30", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index cc36e8f20f..157333ffad 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -27,6 +27,13 @@ "prime_tower_width": "30", "prime_volume": "45", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json index 459f3afefa..5e031b3517 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,13 @@ "prime_tower_width": "40", "prime_volume": "15", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json index 6cfc2cba6d..57a763a355 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json @@ -22,6 +22,13 @@ "prime_tower_width": "50", "prime_volume": "38", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index 90c2cb8f5c..b1ad97d537 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,13 @@ "prime_tower_width": "30", "prime_volume": "54", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index 883fef3cc2..8aae7fa25c 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -28,6 +35,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index a47d78f04e..1c08f23f8e 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "min_width_top_surface": "90", @@ -29,6 +36,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json index ad0960c02a..f5c9737efd 100644 --- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json @@ -14,9 +14,23 @@ "top_shell_layers": "3", "top_shell_thickness": "0.5", "initial_layer_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", "100" ], "initial_layer_infill_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", "180" ], "outer_wall_speed": [ @@ -60,22 +74,64 @@ "600" ], "top_surface_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", "180" ], "gap_infill_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", "200" ], "ironing_speed": "30", "enable_overhang_speed": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "overhang_1_4_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180", "180" ], "overhang_2_4_speed": [ + "20", + "20", + "20", + "20", + "20", + "20", + "20", "20" ], "overhang_3_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10", "10" ], "layer_height": "0.25", @@ -100,36 +156,113 @@ "top_surface_line_width": "0.5", "bottom_shell_layers": "2", "initial_layer_travel_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "bridge_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "bridge_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", "100" ], "default_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "inner_wall_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "internal_solid_infill_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "outer_wall_acceleration": [ + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", "1600" ], "small_perimeter_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", "200" ], "sparse_infill_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "top_surface_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", "3000" ], "initial_layer_acceleration": [ + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", + "1600", "1600" ], "print_extruder_variant": [ diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 93a4f26ef5..3b2e7f8746 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -14,6 +14,13 @@ "prime_tower_width": "30", "prime_volume": "63", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json index 1c5fa45ffd..1ca162e67a 100644 --- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json @@ -16,6 +16,13 @@ "prime_tower_width": "30", "prime_volume": "68", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index 43833fe9c1..b84b343dcc 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -27,6 +34,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index 568e838002..470490fb9f 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -17,6 +17,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_width": "30", @@ -29,6 +36,13 @@ "precise_outer_wall": "1", "prime_tower_brim_width": "5", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index 010c82bb91..97ae45ed4e 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -30,6 +37,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index ee1f213106..e964e08e5d 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -28,6 +35,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json index ab4831845f..51b76f6e33 100644 --- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json @@ -16,6 +16,13 @@ "prime_tower_width": "30", "prime_volume": "90", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index a935192df9..bf9f2644d6 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -31,6 +38,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index 705021d73d..4338dccaa8 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "precise_z_height": "0", @@ -28,6 +35,13 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index c0585abda9..45b2d9431b 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -15,6 +15,13 @@ "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", "internal_bridge_speed": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", "100%" ], "prime_tower_brim_width": "5", @@ -28,6 +35,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150", diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index 22beae020e..b2fb877e5f 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -25,6 +25,13 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "slowdown_for_curled_perimeters": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0" ], "standby_temperature_delta": "-150",