Tweak default parameters

1.  Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2.  Change default sparse_infill_pattern vaule to ipCrossHatch

resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.65",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.46",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json

@@ -30,7 +30,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json

@@ -39,7 +39,7 @@
     "support_object_xy_distance": "60%",
     "support_speed": "40",
     "support_style": "grid",
-    "support_threshold_angle": "45",
+    "support_threshold_angle": "30",
     "support_top_z_distance": "0.15",
     "top_surface_acceleration": "0",
     "travel_acceleration": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.65",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.65",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.46",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json

@@ -30,7 +30,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json

@@ -68,7 +68,7 @@
     "slowdown_for_curled_perimeters": "1",
     "sparse_infill_density": "4%",
     "sparse_infill_line_width": "0.4",
-    "sparse_infill_pattern": "gyroid",
+    "sparse_infill_pattern": "crosshatch",
     "sparse_infill_speed": "195",
     "support_base_pattern": "hollow",
     "support_base_pattern_spacing": "7",
@@ -82,7 +82,7 @@
     "support_on_build_plate_only": "1",
     "support_speed": "195",
     "support_style": "tree_slim",
-    "support_threshold_angle": "40",
+    "support_threshold_angle": "30",
     "support_top_z_distance": "0.28",
     "support_type": "tree(auto)",
     "top_shell_layers": "3",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.65",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "200",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json

@@ -29,7 +29,7 @@
 	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json

@@ -29,7 +29,7 @@
 	"line_width": "0.65",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json

@@ -29,7 +29,7 @@
 	"line_width": "0.85",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json

@@ -30,7 +30,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "line_width": "0.42",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "internal_bridge_support_thickness": "0.8",
     "initial_layer_acceleration": "500",
     "initial_layer_line_width": "0.5",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json

@@ -30,7 +30,7 @@
 	"line_width": "0.26",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json

@@ -30,7 +30,7 @@
 	"line_width": "0.46",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json

@@ -30,7 +30,7 @@
 	"line_width": "0.66",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json

@@ -30,7 +30,7 @@
 	"line_width": "0.86",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "500",
 	"travel_acceleration": "2500",
 	"inner_wall_acceleration": "2000",
@@ -82,7 +82,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
-	"support_threshold_angle": "25",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "2",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json

@@ -28,7 +28,7 @@
     "line_width": "0.4",
     "infill_direction": "45",
     "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
+    "sparse_infill_pattern": "crosshatch",
     "initial_layer_acceleration": "500",
     "travel_acceleration": "700",
     "inner_wall_acceleration": "500",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json

@@ -29,7 +29,7 @@
 	"line_width": "0.45",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
@@ -79,7 +79,7 @@
 	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "0.2",
 	"support_speed": "40",
-	"support_threshold_angle": "45",
+	"support_threshold_angle": "30",
 	"support_object_xy_distance": "60%",
 	"tree_support_branch_angle": "40",
 	"tree_support_wall_count": "0",