mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-18 11:02:08 +00:00
Add elegoo centauri carbon profile (#8405)
* Added Elegoolink connection * Set Elegoo CC default bed to btPTE * Friendly output of some error codes of PrintHost * feat: Add elegoo centauri carbon profile * fix: Fix the issue where the bed type in the printer configuration does not match the bed temperature settings when multiple bed types are not supported. * feat: Modify the elegoo process parameters to disable slowdown_for_curled_perimeters. * feat: Update comment to clarify plate visibility for multi bed support, BBL printer, and selected bed type. * fix: Optimize ElegooLink upload; The code is clearer than before. * feat: Format the ElegooPrintHostSendDialog code. * fix: Remove the unnecessary instantiation attribute in the Elegoo process. * fix: Flatpak compilation failed --------- Co-authored-by: anjis <anjis.zhou@elegoo.com>
This commit is contained in:
wujie
@@ -0,0 +1,7 @@
|
||||
{
|
||||
"elefant_foot_compensation": "0.05",
|
||||
"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"layer_height": "0.08",
|
||||
"name": "0.08mm Optimal @Elegoo C 0.2 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,14 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"inherits": "fdm_process_ecc_02010",
|
||||
"from": "system",
|
||||
"setting_id": "PEC02010",
|
||||
"instantiation": "true",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"layer_height": "0.12",
|
||||
"name": "0.12mm Draft @Elegoo C 0.2 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,7 @@
|
||||
{
|
||||
"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"layer_height": "0.12",
|
||||
"name": "0.12mm Fine @Elegoo C 0.4 nozzle",
|
||||
"wall_loops": "3",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.10mm Standard @Elegoo C 0.2 nozzle",
|
||||
"layer_height": "0.14",
|
||||
"name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,7 @@
|
||||
{
|
||||
"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"layer_height": "0.16",
|
||||
"name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"layer_height": "0.16",
|
||||
"name": "0.16mm Optimal @Elegoo C 0.4 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"layer_height": "0.18",
|
||||
"name": "0.18mm Fine @Elegoo C 0.6 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"inherits": "fdm_process_ecc_04020",
|
||||
"from": "system",
|
||||
"setting_id": "PEC04020",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"name": "0.20mm Strength @Elegoo C 0.4 nozzle",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"reduce_crossing_wall": "1",
|
||||
"bottom_shell_layers": "5",
|
||||
"outer_wall_speed": "120",
|
||||
"print_flow_ratio": "0.95",
|
||||
"sparse_infill_density": "20%",
|
||||
"top_shell_layers": "6",
|
||||
"wall_loops": "6",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"layer_height": "0.24",
|
||||
"name": "0.24mm Draft @Elegoo C 0.4 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,7 @@
|
||||
{
|
||||
"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"layer_height": "0.24",
|
||||
"name": "0.24mm Fine @Elegoo C 0.8 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"layer_height": "0.24",
|
||||
"name": "0.24mm Optimal @Elegoo C 0.6 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.20mm Standard @Elegoo C 0.4 nozzle",
|
||||
"layer_height": "0.28",
|
||||
"name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"inherits": "fdm_process_ecc_06030",
|
||||
"from": "system",
|
||||
"setting_id": "PEC06030",
|
||||
"instantiation": "true",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"inner_wall_speed": "120",
|
||||
"name": "0.30mm Strength @Elegoo C 0.6 nozzle",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"reduce_crossing_wall": "1",
|
||||
"outer_wall_speed": "80",
|
||||
"sparse_infill_density": "15%",
|
||||
"top_surface_speed": "120",
|
||||
"wall_loops": "4",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"layer_height": "0.32",
|
||||
"name": "0.32mm Optimal @Elegoo C 0.8 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"layer_height": "0.36",
|
||||
"name": "0.36mm Draft @Elegoo C 0.6 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"inherits": "fdm_process_ecc_08040",
|
||||
"from": "system",
|
||||
"setting_id": "PEC08040",
|
||||
"instantiation": "true",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"filename_format": "EC_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Elegoo Centauri 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.30mm Standard @Elegoo C 0.6 nozzle",
|
||||
"layer_height": "0.42",
|
||||
"name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
{
|
||||
"inherits": "0.40mm Standard @Elegoo C 0.8 nozzle",
|
||||
"layer_height": "0.48",
|
||||
"name": "0.48mm Draft @Elegoo C 0.8 nozzle",
|
||||
"instantiation": "true"
|
||||
}
|
||||
Reference in New Issue
Block a user