mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-27 19:01:02 +00:00
Add Meltingplot vendor profiles (CHX 350 + MBL series)
Adds the Meltingplot vendor bundle with 5 printer models: - CHX 350 (880x422x943, RepRapFirmware/Duet) - MBL 133/136/308/480 (RepRapFirmware/Duet) Each model ships 0.4/0.6/0.8/1.0/1.2 nozzle variants. Layer height presets span 40-60% of the nozzle diameter and deliberately avoid heights that divide the Z screw lead evenly (CHX: 1204 ball screw, 4 mm lead; MBL: TR4x2 trapezoidal screw, 8 mm lead) so periodic screw error does not repeat as banding. All printers use 2.85 mm filament, so the bundle carries its own filament library (PLA, StoneFil, ABS, TitanX, ASA, PETG, PA6 CF HT, STYX 12, PP 9-2, PET-CF15, Extrudr PLA NX2 Matt, Igus iglidur J260) with the 2.85 mm diameter pinned once in the vendor-local fdm_filament_common base. Machine limits mirror the printers' firmware configuration; machine limit emission is disabled so the values only feed the time estimator.
This commit is contained in:
timschneider
committed by
Tim Schneider
Tim Schneider
parent
88262ee504
commit
009978c638
Binary file not shown.
|
After Width: | Height: | Size: 144 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 42 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 32 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 36 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 52 KiB |
@@ -0,0 +1,96 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Extrudr PLA NX2 Matt",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "qmPRaTcPlmtk6zB2",
|
||||
"filament_id": "EXTNX2M",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Extrudr"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_adaptive_volumetric_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_cost": [
|
||||
"13"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"25"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Igus iglidur J260",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"from": "system",
|
||||
"setting_id": "RtG6RPDLtYzhITc0",
|
||||
"filament_id": "IGSJ260",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Igus"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.35"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.2%"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,99 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot ABS",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "zVQixgSSn1jm1c7n",
|
||||
"filament_id": "MPFABS0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"99%"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#F8F8F8"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot ASA",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "5VuPxdOXfTIidM4X",
|
||||
"filament_id": "MPFASA0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.11"
|
||||
],
|
||||
"filament_cost": [
|
||||
"46.65"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#123123"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot PA6 CF HT",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "kzlYLTM6H5CgpQ8y",
|
||||
"filament_id": "MPFPA6C",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"89"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#858078"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.9%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"99.9%"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot PET-CF15",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "IdqfEh7xRXKTYmV3",
|
||||
"filament_id": "MPFPETC",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_cost": [
|
||||
"77.5"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.9%"
|
||||
],
|
||||
"filament_shrinkage_compensation_z": [
|
||||
"99.9%"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"125"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot PETG",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "dsW7JrzWhKAY1fey",
|
||||
"filament_id": "MPFPTG0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#123123"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot PLA",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "ONpaHlfJVJyh7Shb",
|
||||
"filament_id": "MPFPLA0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"filament_cost": [
|
||||
"34.9"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#F8F8F8"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,87 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot PP 9-2",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"setting_id": "4QiGCRB27RIw6ak4",
|
||||
"filament_id": "MPFPP92",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"filament_density": [
|
||||
"0.7"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"97%"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,87 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot STYX 12",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "z5zIFNr2WrzsC1M2",
|
||||
"filament_id": "MPFSTX0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.02"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"105"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"70"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,93 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot StoneFil",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "8zQd7CZbkAlGa7Xh",
|
||||
"filament_id": "MPFSTF0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_cost": [
|
||||
"68.82"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
"#F8F8F8"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,90 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Meltingplot TitanX",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "LDPRmxlvX97NXF0F",
|
||||
"filament_id": "MPFTIX0",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Meltingplot"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"99.75%"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"65"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"65"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"110"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle",
|
||||
"Meltingplot CHX 350 0.4 nozzle",
|
||||
"Meltingplot CHX 350 0.6 nozzle",
|
||||
"Meltingplot CHX 350 0.8 nozzle",
|
||||
"Meltingplot CHX 350 1.0 nozzle",
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_abs",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"18"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_asa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"3"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,144 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"0"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"2.85"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"35"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,91 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pa",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"108"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"300"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,88 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pc",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"140"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,100 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_petg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"255"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,94 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot CHX 350 0.4 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_chx",
|
||||
"from": "system",
|
||||
"setting_id": "gyTKYZ8qKgen4dOM",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot CHX 350",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"880x0",
|
||||
"880x422",
|
||||
"0x422"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"default_print_profile": "0.22mm Standard 0.4 nozzle @Meltingplot CHX 350",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot CHX 350 0.6 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_chx",
|
||||
"from": "system",
|
||||
"setting_id": "OeqLbNEMEImXnJBz",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot CHX 350",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.36"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"880x0",
|
||||
"880x422",
|
||||
"0x422"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"default_print_profile": "0.32mm Standard 0.6 nozzle @Meltingplot CHX 350",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot CHX 350 0.8 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_chx",
|
||||
"from": "system",
|
||||
"setting_id": "IlK23KWfTD7BLPpZ",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot CHX 350",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"880x0",
|
||||
"880x422",
|
||||
"0x422"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"default_print_profile": "0.44mm Standard 0.8 nozzle @Meltingplot CHX 350",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
],
|
||||
"min_resonance_avoidance_speed": "55",
|
||||
"max_resonance_avoidance_speed": "115"
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot CHX 350 1.0 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_chx",
|
||||
"from": "system",
|
||||
"setting_id": "AGIxh7arXUPLFcnj",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot CHX 350",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.60"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"880x0",
|
||||
"880x422",
|
||||
"0x422"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"default_print_profile": "0.52mm Standard 1.0 nozzle @Meltingplot CHX 350",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,33 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot CHX 350 1.2 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_chx",
|
||||
"from": "system",
|
||||
"setting_id": "xcwkp9Kdund0y4Zh",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot CHX 350",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.72"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"880x0",
|
||||
"880x422",
|
||||
"0x422"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"default_print_profile": "0.64mm Standard 1.2 nozzle @Meltingplot CHX 350",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Meltingplot CHX 350",
|
||||
"model_id": "Meltingplot-CHX-350",
|
||||
"nozzle_diameter": "0.4;0.6;0.8;1.0;1.2",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Meltingplot",
|
||||
"bed_model": "chx350-printbed.stl",
|
||||
"bed_texture": "chx350-texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Meltingplot PLA;Meltingplot PETG;Meltingplot ABS;Meltingplot ASA"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 133 0.4 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "wyroTvO4uFQPS3Se",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 133",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"835x0",
|
||||
"835x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "394",
|
||||
"default_print_profile": "0.22mm Standard 0.4 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 133 0.6 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "QbxTZqa4I7jaXUzw",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 133",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.36"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"835x0",
|
||||
"835x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "394",
|
||||
"default_print_profile": "0.30mm Standard 0.6 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 133 0.8 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "VXumP32DSNKwddyS",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 133",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"835x0",
|
||||
"835x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "394",
|
||||
"default_print_profile": "0.44mm Standard 0.8 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 133 1.0 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "A2a4j8nclQxokoHn",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 133",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.60"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"835x0",
|
||||
"835x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "394",
|
||||
"default_print_profile": "0.52mm Standard 1.0 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 133 1.2 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "wn8Ez4ZM1ubuftLv",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 133",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.72"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"835x0",
|
||||
"835x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "394",
|
||||
"default_print_profile": "0.64mm Standard 1.2 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Meltingplot MBL 133",
|
||||
"model_id": "Meltingplot-MBL-133",
|
||||
"nozzle_diameter": "0.8;0.4;0.6;1.0;1.2",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Meltingplot",
|
||||
"bed_model": "mbl133-printbed.stl",
|
||||
"bed_texture": "mbl-133-texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Meltingplot PLA;Meltingplot PETG;Meltingplot ABS;Meltingplot ASA"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 136 0.4 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "Wv2F2INNahYnIP2n",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 136",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "396",
|
||||
"default_print_profile": "0.22mm Standard 0.4 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 136 0.6 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "bmYfNrpRLtITsguf",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 136",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.36"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "396",
|
||||
"default_print_profile": "0.30mm Standard 0.6 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 136 0.8 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "9fv3aEc4tAsdeaPI",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 136",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "396",
|
||||
"default_print_profile": "0.44mm Standard 0.8 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 136 1.0 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "l45hlHUCFi1UcGpM",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 136",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.60"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "396",
|
||||
"default_print_profile": "0.52mm Standard 1.0 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 136 1.2 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "LAAqt3v5IkT75PMJ",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 136",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.72"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "396",
|
||||
"default_print_profile": "0.64mm Standard 1.2 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Meltingplot MBL 136",
|
||||
"model_id": "Meltingplot-MBL-136",
|
||||
"nozzle_diameter": "0.8;0.4;0.6;1.0;1.2",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Meltingplot",
|
||||
"bed_model": "mbl136-printbed.stl",
|
||||
"bed_texture": "mbl-136-texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Meltingplot PLA;Meltingplot PETG;Meltingplot ABS;Meltingplot ASA"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 308 0.4 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "AbxDaZCTmysg7JTf",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 308",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "896",
|
||||
"default_print_profile": "0.22mm Standard 0.4 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 308 0.6 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "YRQhtucLD6iZRcY0",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 308",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.36"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "896",
|
||||
"default_print_profile": "0.30mm Standard 0.6 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 308 0.8 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "3scvx4P2vXtmoMmI",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 308",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "896",
|
||||
"default_print_profile": "0.44mm Standard 0.8 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 308 1.0 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "VpAHWQ6v3aZLUIs1",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 308",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.60"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "896",
|
||||
"default_print_profile": "0.52mm Standard 1.0 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 308 1.2 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "WuT3Qj2xyAPfDsXW",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 308",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.72"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "896",
|
||||
"default_print_profile": "0.64mm Standard 1.2 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Meltingplot MBL 308",
|
||||
"model_id": "Meltingplot-MBL-308",
|
||||
"nozzle_diameter": "0.8;0.4;0.6;1.0;1.2",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Meltingplot",
|
||||
"bed_model": "mbl308-printbed.stl",
|
||||
"bed_texture": "mbl-308-texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Meltingplot PLA;Meltingplot PETG;Meltingplot ABS;Meltingplot ASA"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 480 0.4 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "14E0ywGwPgPzuR7q",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 480",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "1396",
|
||||
"default_print_profile": "0.22mm Standard 0.4 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 480 0.6 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "RntAZ9kYe1JiK9qL",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 480",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.24"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.36"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "1396",
|
||||
"default_print_profile": "0.30mm Standard 0.6 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 480 0.8 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "3wnBTip16mjzuNaR",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 480",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "1396",
|
||||
"default_print_profile": "0.44mm Standard 0.8 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 480 1.0 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "KXzVlZQpxRpoYCZC",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 480",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.40"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.60"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "1396",
|
||||
"default_print_profile": "0.52mm Standard 1.0 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Meltingplot MBL 480 1.2 nozzle",
|
||||
"inherits": "fdm_machine_meltingplot_mbl",
|
||||
"from": "system",
|
||||
"setting_id": "FhIoFCxemK2Miw2J",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Meltingplot MBL 480",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.72"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"850x0",
|
||||
"850x405",
|
||||
"0x405"
|
||||
],
|
||||
"printable_height": "1396",
|
||||
"default_print_profile": "0.64mm Standard 1.2 nozzle @Meltingplot MBL",
|
||||
"default_filament_profile": [
|
||||
"Meltingplot PLA"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Meltingplot MBL 480",
|
||||
"model_id": "Meltingplot-MBL-480",
|
||||
"nozzle_diameter": "0.8;0.4;0.6;1.0;1.2",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Meltingplot",
|
||||
"bed_model": "mbl480-printbed.stl",
|
||||
"bed_texture": "mbl-480-texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Meltingplot PLA;Meltingplot PETG;Meltingplot ABS;Meltingplot ASA"
|
||||
}
|
||||
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"gcode_flavor": "reprapfirmware",
|
||||
"host_type": "duet",
|
||||
"disable_m73": "1",
|
||||
"emit_machine_limits_to_gcode": "0",
|
||||
"silent_mode": "0",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"resonance_avoidance": "0",
|
||||
"retraction_length": [
|
||||
"0"
|
||||
],
|
||||
"use_firmware_retraction": "1",
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"wipe": [
|
||||
"0"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1"
|
||||
],
|
||||
"single_extruder_multi_material": "0",
|
||||
"purge_in_prime_tower": "0",
|
||||
"time_cost": "2",
|
||||
"default_print_profile": "",
|
||||
"change_filament_gcode": "",
|
||||
"machine_pause_gcode": "M226",
|
||||
"machine_end_gcode": "M98 P\"0:/sys/meltingplot/print_end\"",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n"
|
||||
}
|
||||
@@ -0,0 +1,70 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_meltingplot_chx",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_kickstart": "0.5",
|
||||
"fan_speedup_time": "1",
|
||||
"machine_max_acceleration_e": [
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"4000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"3000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"6000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"400"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"33.33"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"1.2"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"833.33"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"30"
|
||||
],
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_height_to_lid": "150",
|
||||
"nozzle_type": [
|
||||
"stainless_steel"
|
||||
],
|
||||
"min_resonance_avoidance_speed": "40",
|
||||
"max_resonance_avoidance_speed": "105",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"printable_height": "943",
|
||||
"machine_start_gcode": "M140 P0 S{first_layer_bed_temperature[0]} ; set bed temp\nG10 P0 S{first_layer_temperature[0]}\nM568 P0 R{first_layer_temperature[0] + standby_temperature_delta} S{first_layer_temperature[0]} A2\n\nM83 ; use relative distances for extrusion\nG90 ; use absolute coordinates\n\nM98 P\"0:/sys/meltingplot/print_start\""
|
||||
}
|
||||
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_meltingplot_mbl",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"fan_kickstart": "0.5",
|
||||
"fan_speedup_time": "0.5",
|
||||
"machine_max_acceleration_e": [
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"800"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1250"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"1500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"72"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"3"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.3"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"240"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"240"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12"
|
||||
],
|
||||
"extruder_clearance_radius": "75",
|
||||
"extruder_clearance_height_to_rod": "30",
|
||||
"extruder_clearance_height_to_lid": "30",
|
||||
"retraction_minimum_travel": [
|
||||
"4"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"thumbnails": [
|
||||
"64x64",
|
||||
"400x300"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"machine_start_gcode": "M140 P0 S{first_layer_bed_temperature[0]} ; set bed temp\nG10 P0 R{first_layer_temperature[0] + standby_temperature_delta} S{first_layer_temperature[0]}\n\nM83 ; use relative distances for extrusion\nG90 ; use absolute coordinates\n\nM98 P\"0:/sys/meltingplot/print_start\""
|
||||
}
|
||||
@@ -0,0 +1,158 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
width="3174.8032"
|
||||
height="1530.7086"
|
||||
viewBox="0 0 3174.8032 1530.7086"
|
||||
version="1.1"
|
||||
id="svg338"
|
||||
sodipodi:docname="printbed_outline_133.svg"
|
||||
inkscape:version="1.1 (c68e22c387, 2021-05-23)"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/">
|
||||
<metadata
|
||||
id="metadata344">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title>MBL133</dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs342" />
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1017"
|
||||
id="namedview340"
|
||||
showgrid="false"
|
||||
units="px"
|
||||
scale-x="1"
|
||||
inkscape:zoom="2.2373722"
|
||||
inkscape:cx="2861.169"
|
||||
inkscape:cy="1412.5947"
|
||||
inkscape:window-x="-8"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg338"
|
||||
inkscape:pagecheckerboard="0"
|
||||
height="1530.7086px" />
|
||||
<title
|
||||
id="title2">MBL133</title>
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="1530,70862"
|
||||
id="line4"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="0.70999998"
|
||||
id="line10"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="1530,70862"
|
||||
id="line14"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="0.70999998"
|
||||
id="line24"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<g
|
||||
aria-label="Meltingplot MBL 133"
|
||||
id="text3543"
|
||||
style="font-weight:600;font-size:40px;line-height:1.25;font-family:'Open Sans';-inkscape-font-specification:'Open Sans, Semi-Bold';letter-spacing:0px;word-spacing:0px;stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1">
|
||||
<path
|
||||
d="m 2724.3225,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path8327"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2757.8381,1456.952 q -5.039,0 -7.8906,-2.9297 -2.832,-2.9492 -2.832,-8.1054 0,-5.293 2.6367,-8.3203 2.6367,-3.0274 7.2461,-3.0274 4.2773,0 6.7578,2.5977 2.4805,2.5976 2.4805,7.1484 v 2.4805 h -14.3946 q 0.098,3.1445 1.6993,4.8437 1.6015,1.6797 4.5117,1.6797 1.914,0 3.5547,-0.3515 1.6601,-0.3711 3.5547,-1.211 v 3.7305 q -1.6797,0.8008 -3.3985,1.1328 -1.7187,0.332 -3.9258,0.332 z m -0.8398,-18.9062 q -2.1875,0 -3.5156,1.3867 -1.3086,1.3867 -1.5625,4.043 h 9.8047 q -0.039,-2.6758 -1.2891,-4.043 -1.25,-1.3867 -3.4375,-1.3867 z"
|
||||
id="path8329"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2776.0413,1456.5614 h -4.5899 v -30.3906 h 4.5899 z"
|
||||
id="path8331"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2790.6506,1453.2411 q 1.6797,0 3.3594,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1915,0.2343 -2.4805,0.2343 -6.5235,0 -6.5235,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.1641,-1.6797 1.5625,-4.5703 h 2.832 v 4.8046 h 6.1524 v 3.4766 h -6.1524 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8399,0.7813 2.1875,0.7813 z"
|
||||
id="path8333"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2802.9163,1456.5614 h -4.5899 v -21.6016 h 4.5899 z m -4.8633,-27.3242 q 0,-1.2305 0.664,-1.8945 0.6836,-0.6641 1.9336,-0.6641 1.211,0 1.875,0.6641 0.6836,0.664 0.6836,1.8945 0,1.1719 -0.6836,1.8555 -0.664,0.664 -1.875,0.664 -1.25,0 -1.9336,-0.664 -0.664,-0.6836 -0.664,-1.8555 z"
|
||||
id="path8335"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2828.4827,1456.5614 h -4.6094 v -13.2812 q 0,-2.5 -1.0156,-3.7305 -0.9961,-1.2305 -3.1836,-1.2305 -2.9102,0 -4.2578,1.7188 -1.3477,1.7187 -1.3477,5.7617 v 10.7617 h -4.5898 v -21.6016 h 3.5937 l 0.6445,2.8321 h 0.2344 q 0.9766,-1.543 2.7735,-2.3828 1.7968,-0.8399 3.9843,-0.8399 7.7735,0 7.7735,7.9102 z"
|
||||
id="path8337"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2853.1116,1434.9598 v 2.5196 l -3.6914,0.6836 q 0.5078,0.6836 0.8398,1.6797 0.332,0.996 0.332,2.1093 0,3.3399 -2.3046,5.2539 -2.3047,1.9141 -6.3477,1.9141 -1.0352,0 -1.875,-0.1563 -1.4844,0.918 -1.4844,2.1485 0,0.7422 0.6836,1.1133 0.7031,0.3711 2.5586,0.3711 h 3.7695 q 3.5743,0 5.4297,1.5234 1.8555,1.5234 1.8555,4.3945 0,3.6719 -3.0273,5.6641 -3.0274,1.9922 -8.75,1.9922 -4.4141,0 -6.7383,-1.5625 -2.3242,-1.5625 -2.3242,-4.4531 0,-1.9922 1.25,-3.3594 1.2695,-1.3477 3.5351,-1.875 -0.918,-0.3906 -1.5234,-1.25 -0.586,-0.8789 -0.586,-1.836 0,-1.2109 0.6836,-2.0507 0.6836,-0.8399 2.0313,-1.6602 -1.6797,-0.7227 -2.7344,-2.3437 -1.0352,-1.6407 -1.0352,-3.8282 0,-3.5156 2.2071,-5.4492 2.2265,-1.9336 6.3281,-1.9336 0.918,0 1.9141,0.1367 1.0156,0.1172 1.5234,0.2539 z m -16.9727,24.961 q 0,1.4844 1.3281,2.2851 1.3477,0.8008 3.7696,0.8008 3.75,0 5.5859,-1.0742 1.8359,-1.0742 1.8359,-2.8516 0,-1.4062 -1.0156,-2.0117 -0.9961,-0.5859 -3.7304,-0.5859 h -3.4766 q -1.9727,0 -3.1445,0.9179 -1.1524,0.9375 -1.1524,2.5196 z m 1.9727,-17.9688 q 0,2.0313 1.0351,3.125 1.0547,1.0938 3.0078,1.0938 3.9844,0 3.9844,-4.2578 0,-2.1094 -0.9961,-3.2422 -0.9765,-1.1524 -2.9883,-1.1524 -1.9921,0 -3.0273,1.1328 -1.0156,1.1329 -1.0156,3.3008 z"
|
||||
id="path8339"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2868.0725,1456.952 q -4.1016,0 -6.3672,-2.9492 h -0.2734 q 0.2734,2.7344 0.2734,3.3203 v 8.8477 h -4.5898 v -31.211 h 3.7109 q 0.1563,0.6055 0.6445,2.8907 h 0.2344 q 2.1485,-3.2813 6.4453,-3.2813 4.043,0 6.2891,2.9297 2.2656,2.9297 2.2656,8.2227 0,5.2929 -2.3047,8.2617 -2.2851,2.9687 -6.3281,2.9687 z m -1.1133,-18.6328 q -2.7343,0 -4.0039,1.6016 -1.25,1.6015 -1.25,5.1172 v 0.6836 q 0,3.9453 1.25,5.7226 1.25,1.7578 4.0821,1.7578 2.3828,0 3.6718,-1.9531 1.2891,-1.9531 1.2891,-5.5664 0,-3.6328 -1.2891,-5.4883 -1.2695,-1.875 -3.75,-1.875 z"
|
||||
id="path8341"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2886.6272,1456.5614 h -4.5898 v -30.3906 h 4.5898 z"
|
||||
id="path8343"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2912.3499,1445.7216 q 0,5.2929 -2.7149,8.2617 -2.7148,2.9687 -7.5586,2.9687 -3.0273,0 -5.3515,-1.3672 -2.3243,-1.3671 -3.5743,-3.9257 -1.25,-2.5586 -1.25,-5.9375 0,-5.2539 2.6953,-8.2032 2.6954,-2.9492 7.5977,-2.9492 4.6875,0 7.4219,3.0274 2.7344,3.0078 2.7344,8.125 z m -15.7227,0 q 0,7.4804 5.5273,7.4804 5.4688,0 5.4688,-7.4804 0,-7.4024 -5.5078,-7.4024 -2.8906,0 -4.1992,1.9141 -1.2891,1.914 -1.2891,5.4883 z"
|
||||
id="path8345"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2925.6702,1453.2411 q 1.6797,0 3.3593,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1914,0.2343 -2.4805,0.2343 -6.5234,0 -6.5234,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.164,-1.6797 1.5625,-4.5703 h 2.8321 v 4.8046 h 6.1523 v 3.4766 h -6.1523 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8398,0.7813 2.1875,0.7813 z"
|
||||
id="path8347"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2956.5686,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path8349"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2981.1389,1428.0067 h 8.4766 q 5.8984,0 8.5156,1.7188 2.6367,1.7187 2.6367,5.4297 0,2.5 -1.289,4.1601 -1.2891,1.6602 -3.711,2.0899 v 0.1953 q 3.0078,0.5664 4.4141,2.2461 1.4258,1.6601 1.4258,4.5117 0,3.8476 -2.6953,6.0351 -2.6758,2.168 -7.461,2.168 h -10.3125 z m 4.668,11.7969 h 4.4922 q 2.9297,0 4.2773,-0.918 1.3477,-0.9375 1.3477,-3.164 0,-2.0118 -1.4649,-2.9102 -1.4453,-0.8984 -4.6093,-0.8984 h -4.043 z m 0,3.7891 v 9.0429 h 4.9609 q 2.9297,0 4.4141,-1.1133 1.5039,-1.1328 1.5039,-3.5546 0,-2.2266 -1.5234,-3.3008 -1.5235,-1.0742 -4.629,-1.0742 z"
|
||||
id="path8351"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3007.5452,1456.5614 v -28.5547 h 4.6679 v 24.5508 h 12.0899 v 4.0039 z"
|
||||
id="path8353"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3051.0803,1456.5614 h -4.5898 v -18.4375 q 0,-3.3008 0.1562,-5.2344 -0.4492,0.4688 -1.1133,1.0352 -0.6445,0.5664 -4.375,3.5937 l -2.3046,-2.9101 8.3984,-6.6016 h 3.8281 z"
|
||||
id="path8355"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3078.717,1434.5692 q 0,2.7149 -1.582,4.5313 -1.582,1.7968 -4.4531,2.4218 v 0.1563 q 3.4375,0.4297 5.1562,2.1484 1.7188,1.6992 1.7188,4.5313 0,4.1211 -2.9102,6.3672 -2.9101,2.2265 -8.2812,2.2265 -4.7461,0 -8.0078,-1.5429 v -4.0821 q 1.8164,0.8985 3.8476,1.3867 2.0313,0.4883 3.9063,0.4883 3.3203,0 4.9609,-1.2304 1.6406,-1.2305 1.6406,-3.8086 0,-2.2852 -1.8164,-3.3594 -1.8164,-1.0742 -5.7031,-1.0742 h -2.4805 v -3.7305 h 2.5196 q 6.8359,0 6.8359,-4.7266 0,-1.8359 -1.1914,-2.832 -1.1914,-0.9961 -3.5156,-0.9961 -1.6211,0 -3.125,0.4688 -1.5039,0.4492 -3.5547,1.7773 l -2.2461,-3.2031 q 3.9258,-2.8906 9.1211,-2.8906 4.3164,0 6.7383,1.8554 2.4218,1.8555 2.4218,5.1172 z"
|
||||
id="path8357"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3101.5491,1434.5692 q 0,2.7149 -1.5821,4.5313 -1.582,1.7968 -4.4531,2.4218 v 0.1563 q 3.4375,0.4297 5.1563,2.1484 1.7187,1.6992 1.7187,4.5313 0,4.1211 -2.9101,6.3672 -2.9102,2.2265 -8.2813,2.2265 -4.7461,0 -8.0078,-1.5429 v -4.0821 q 1.8164,0.8985 3.8477,1.3867 2.0312,0.4883 3.9062,0.4883 3.3203,0 4.9609,-1.2304 1.6407,-1.2305 1.6407,-3.8086 0,-2.2852 -1.8164,-3.3594 -1.8164,-1.0742 -5.7032,-1.0742 h -2.4804 v -3.7305 h 2.5195 q 6.8359,0 6.8359,-4.7266 0,-1.8359 -1.1914,-2.832 -1.1914,-0.9961 -3.5156,-0.9961 -1.6211,0 -3.125,0.4688 -1.5039,0.4492 -3.5547,1.7773 l -2.2461,-3.2031 q 3.9258,-2.8906 9.1211,-2.8906 4.3164,0 6.7383,1.8554 2.4219,1.8555 2.4219,5.1172 z"
|
||||
id="path8359"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 11 KiB |
@@ -0,0 +1,158 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
width="3174.8032"
|
||||
height="1530.7086"
|
||||
viewBox="0 0 3174.8032 1530.7086"
|
||||
version="1.1"
|
||||
id="svg338"
|
||||
sodipodi:docname="printbed_outline_136.svg"
|
||||
inkscape:version="1.1 (c68e22c387, 2021-05-23)"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/">
|
||||
<metadata
|
||||
id="metadata344">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title>MBL133</dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs342" />
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1017"
|
||||
id="namedview340"
|
||||
showgrid="false"
|
||||
units="px"
|
||||
scale-x="1"
|
||||
inkscape:zoom="2.2373722"
|
||||
inkscape:cx="3021.6251"
|
||||
inkscape:cy="1447.9039"
|
||||
inkscape:window-x="-8"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg338"
|
||||
inkscape:pagecheckerboard="0"
|
||||
height="1530.7086px" />
|
||||
<title
|
||||
id="title2">MBL133</title>
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="1530,70862"
|
||||
id="line4"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="0.70999998"
|
||||
id="line10"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="1530,70862"
|
||||
id="line14"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="0.70999998"
|
||||
id="line24"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<g
|
||||
aria-label="Meltingplot MBL 136"
|
||||
id="text3543"
|
||||
style="font-weight:600;font-size:40px;line-height:1.25;font-family:'Open Sans';-inkscape-font-specification:'Open Sans, Semi-Bold';letter-spacing:0px;word-spacing:0px;fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1">
|
||||
<path
|
||||
d="m 2724.3225,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path9093"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2757.8381,1456.952 q -5.039,0 -7.8906,-2.9297 -2.832,-2.9492 -2.832,-8.1054 0,-5.293 2.6367,-8.3203 2.6367,-3.0274 7.2461,-3.0274 4.2773,0 6.7578,2.5977 2.4805,2.5976 2.4805,7.1484 v 2.4805 h -14.3946 q 0.098,3.1445 1.6993,4.8437 1.6015,1.6797 4.5117,1.6797 1.914,0 3.5547,-0.3515 1.6601,-0.3711 3.5547,-1.211 v 3.7305 q -1.6797,0.8008 -3.3985,1.1328 -1.7187,0.332 -3.9258,0.332 z m -0.8398,-18.9062 q -2.1875,0 -3.5156,1.3867 -1.3086,1.3867 -1.5625,4.043 h 9.8047 q -0.039,-2.6758 -1.2891,-4.043 -1.25,-1.3867 -3.4375,-1.3867 z"
|
||||
id="path9095"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2776.0413,1456.5614 h -4.5899 v -30.3906 h 4.5899 z"
|
||||
id="path9097"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2790.6506,1453.2411 q 1.6797,0 3.3594,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1915,0.2343 -2.4805,0.2343 -6.5235,0 -6.5235,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.1641,-1.6797 1.5625,-4.5703 h 2.832 v 4.8046 h 6.1524 v 3.4766 h -6.1524 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8399,0.7813 2.1875,0.7813 z"
|
||||
id="path9099"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2802.9163,1456.5614 h -4.5899 v -21.6016 h 4.5899 z m -4.8633,-27.3242 q 0,-1.2305 0.664,-1.8945 0.6836,-0.6641 1.9336,-0.6641 1.211,0 1.875,0.6641 0.6836,0.664 0.6836,1.8945 0,1.1719 -0.6836,1.8555 -0.664,0.664 -1.875,0.664 -1.25,0 -1.9336,-0.664 -0.664,-0.6836 -0.664,-1.8555 z"
|
||||
id="path9101"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2828.4827,1456.5614 h -4.6094 v -13.2812 q 0,-2.5 -1.0156,-3.7305 -0.9961,-1.2305 -3.1836,-1.2305 -2.9102,0 -4.2578,1.7188 -1.3477,1.7187 -1.3477,5.7617 v 10.7617 h -4.5898 v -21.6016 h 3.5937 l 0.6445,2.8321 h 0.2344 q 0.9766,-1.543 2.7735,-2.3828 1.7968,-0.8399 3.9843,-0.8399 7.7735,0 7.7735,7.9102 z"
|
||||
id="path9103"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2853.1116,1434.9598 v 2.5196 l -3.6914,0.6836 q 0.5078,0.6836 0.8398,1.6797 0.332,0.996 0.332,2.1093 0,3.3399 -2.3046,5.2539 -2.3047,1.9141 -6.3477,1.9141 -1.0352,0 -1.875,-0.1563 -1.4844,0.918 -1.4844,2.1485 0,0.7422 0.6836,1.1133 0.7031,0.3711 2.5586,0.3711 h 3.7695 q 3.5743,0 5.4297,1.5234 1.8555,1.5234 1.8555,4.3945 0,3.6719 -3.0273,5.6641 -3.0274,1.9922 -8.75,1.9922 -4.4141,0 -6.7383,-1.5625 -2.3242,-1.5625 -2.3242,-4.4531 0,-1.9922 1.25,-3.3594 1.2695,-1.3477 3.5351,-1.875 -0.918,-0.3906 -1.5234,-1.25 -0.586,-0.8789 -0.586,-1.836 0,-1.2109 0.6836,-2.0507 0.6836,-0.8399 2.0313,-1.6602 -1.6797,-0.7227 -2.7344,-2.3437 -1.0352,-1.6407 -1.0352,-3.8282 0,-3.5156 2.2071,-5.4492 2.2265,-1.9336 6.3281,-1.9336 0.918,0 1.9141,0.1367 1.0156,0.1172 1.5234,0.2539 z m -16.9727,24.961 q 0,1.4844 1.3281,2.2851 1.3477,0.8008 3.7696,0.8008 3.75,0 5.5859,-1.0742 1.8359,-1.0742 1.8359,-2.8516 0,-1.4062 -1.0156,-2.0117 -0.9961,-0.5859 -3.7304,-0.5859 h -3.4766 q -1.9727,0 -3.1445,0.9179 -1.1524,0.9375 -1.1524,2.5196 z m 1.9727,-17.9688 q 0,2.0313 1.0351,3.125 1.0547,1.0938 3.0078,1.0938 3.9844,0 3.9844,-4.2578 0,-2.1094 -0.9961,-3.2422 -0.9765,-1.1524 -2.9883,-1.1524 -1.9921,0 -3.0273,1.1328 -1.0156,1.1329 -1.0156,3.3008 z"
|
||||
id="path9105"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2868.0725,1456.952 q -4.1016,0 -6.3672,-2.9492 h -0.2734 q 0.2734,2.7344 0.2734,3.3203 v 8.8477 h -4.5898 v -31.211 h 3.7109 q 0.1563,0.6055 0.6445,2.8907 h 0.2344 q 2.1485,-3.2813 6.4453,-3.2813 4.043,0 6.2891,2.9297 2.2656,2.9297 2.2656,8.2227 0,5.2929 -2.3047,8.2617 -2.2851,2.9687 -6.3281,2.9687 z m -1.1133,-18.6328 q -2.7343,0 -4.0039,1.6016 -1.25,1.6015 -1.25,5.1172 v 0.6836 q 0,3.9453 1.25,5.7226 1.25,1.7578 4.0821,1.7578 2.3828,0 3.6718,-1.9531 1.2891,-1.9531 1.2891,-5.5664 0,-3.6328 -1.2891,-5.4883 -1.2695,-1.875 -3.75,-1.875 z"
|
||||
id="path9107"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2886.6272,1456.5614 h -4.5898 v -30.3906 h 4.5898 z"
|
||||
id="path9109"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2912.3499,1445.7216 q 0,5.2929 -2.7149,8.2617 -2.7148,2.9687 -7.5586,2.9687 -3.0273,0 -5.3515,-1.3672 -2.3243,-1.3671 -3.5743,-3.9257 -1.25,-2.5586 -1.25,-5.9375 0,-5.2539 2.6953,-8.2032 2.6954,-2.9492 7.5977,-2.9492 4.6875,0 7.4219,3.0274 2.7344,3.0078 2.7344,8.125 z m -15.7227,0 q 0,7.4804 5.5273,7.4804 5.4688,0 5.4688,-7.4804 0,-7.4024 -5.5078,-7.4024 -2.8906,0 -4.1992,1.9141 -1.2891,1.914 -1.2891,5.4883 z"
|
||||
id="path9111"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2925.6702,1453.2411 q 1.6797,0 3.3593,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1914,0.2343 -2.4805,0.2343 -6.5234,0 -6.5234,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.164,-1.6797 1.5625,-4.5703 h 2.8321 v 4.8046 h 6.1523 v 3.4766 h -6.1523 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8398,0.7813 2.1875,0.7813 z"
|
||||
id="path9113"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2956.5686,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path9115"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 2981.1389,1428.0067 h 8.4766 q 5.8984,0 8.5156,1.7188 2.6367,1.7187 2.6367,5.4297 0,2.5 -1.289,4.1601 -1.2891,1.6602 -3.711,2.0899 v 0.1953 q 3.0078,0.5664 4.4141,2.2461 1.4258,1.6601 1.4258,4.5117 0,3.8476 -2.6953,6.0351 -2.6758,2.168 -7.461,2.168 h -10.3125 z m 4.668,11.7969 h 4.4922 q 2.9297,0 4.2773,-0.918 1.3477,-0.9375 1.3477,-3.164 0,-2.0118 -1.4649,-2.9102 -1.4453,-0.8984 -4.6093,-0.8984 h -4.043 z m 0,3.7891 v 9.0429 h 4.9609 q 2.9297,0 4.4141,-1.1133 1.5039,-1.1328 1.5039,-3.5546 0,-2.2266 -1.5234,-3.3008 -1.5235,-1.0742 -4.629,-1.0742 z"
|
||||
id="path9117"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 3007.5452,1456.5614 v -28.5547 h 4.6679 v 24.5508 h 12.0899 v 4.0039 z"
|
||||
id="path9119"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 3051.0803,1456.5614 h -4.5898 v -18.4375 q 0,-3.3008 0.1562,-5.2344 -0.4492,0.4688 -1.1133,1.0352 -0.6445,0.5664 -4.375,3.5937 l -2.3046,-2.9101 8.3984,-6.6016 h 3.8281 z"
|
||||
id="path9121"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 3078.717,1434.5692 q 0,2.7149 -1.582,4.5313 -1.582,1.7968 -4.4531,2.4218 v 0.1563 q 3.4375,0.4297 5.1562,2.1484 1.7188,1.6992 1.7188,4.5313 0,4.1211 -2.9102,6.3672 -2.9101,2.2265 -8.2812,2.2265 -4.7461,0 -8.0078,-1.5429 v -4.0821 q 1.8164,0.8985 3.8476,1.3867 2.0313,0.4883 3.9063,0.4883 3.3203,0 4.9609,-1.2304 1.6406,-1.2305 1.6406,-3.8086 0,-2.2852 -1.8164,-3.3594 -1.8164,-1.0742 -5.7031,-1.0742 h -2.4805 v -3.7305 h 2.5196 q 6.8359,0 6.8359,-4.7266 0,-1.8359 -1.1914,-2.832 -1.1914,-0.9961 -3.5156,-0.9961 -1.6211,0 -3.125,0.4688 -1.5039,0.4492 -3.5547,1.7773 l -2.2461,-3.2031 q 3.9258,-2.8906 9.1211,-2.8906 4.3164,0 6.7383,1.8554 2.4218,1.8555 2.4218,5.1172 z"
|
||||
id="path9123"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
<path
|
||||
d="m 3083.3459,1444.3934 q 0,-16.7578 13.6524,-16.7578 2.1484,0 3.6328,0.3321 v 3.8281 q -1.4844,-0.4297 -3.4375,-0.4297 -4.5898,0 -6.8945,2.4609 -2.3047,2.461 -2.5,7.8907 h 0.2343 q 0.918,-1.5821 2.5782,-2.4415 1.6601,-0.8789 3.9062,-0.8789 3.8867,0 6.0547,2.3829 2.168,2.3828 2.168,6.4648 0,4.4922 -2.5196,7.1094 -2.5,2.5976 -6.8359,2.5976 -3.0664,0 -5.332,-1.4648 -2.2656,-1.4844 -3.4961,-4.2969 -1.211,-2.832 -1.211,-6.7969 z m 9.961,8.7696 q 2.3633,0 3.6328,-1.5235 1.2891,-1.5234 1.2891,-4.3554 0,-2.461 -1.211,-3.8672 -1.1914,-1.4063 -3.5937,-1.4063 -1.4844,0 -2.7344,0.6446 -1.25,0.625 -1.9727,1.7382 -0.7226,1.0938 -0.7226,2.2461 0,2.7539 1.4844,4.6485 1.5039,1.875 3.8281,1.875 z"
|
||||
id="path9125"
|
||||
style="fill:#ffffff;fill-opacity:1;stroke:#ffffff;stroke-opacity:1" />
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 11 KiB |
@@ -0,0 +1,158 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
width="3174.8032"
|
||||
height="1530.7086"
|
||||
viewBox="0 0 3174.8032 1530.7086"
|
||||
version="1.1"
|
||||
id="svg338"
|
||||
sodipodi:docname="printbed_outline_308.svg"
|
||||
inkscape:version="1.1 (c68e22c387, 2021-05-23)"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/">
|
||||
<metadata
|
||||
id="metadata344">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title>MBL133</dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs342" />
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1017"
|
||||
id="namedview340"
|
||||
showgrid="false"
|
||||
units="px"
|
||||
scale-x="1"
|
||||
inkscape:zoom="1.1186861"
|
||||
inkscape:cx="2843.0674"
|
||||
inkscape:cy="1356.5021"
|
||||
inkscape:window-x="-8"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg338"
|
||||
inkscape:pagecheckerboard="0"
|
||||
height="1530.7086px" />
|
||||
<title
|
||||
id="title2">MBL133</title>
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="1530,70862"
|
||||
id="line4"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="0.70999998"
|
||||
id="line10"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="1530,70862"
|
||||
id="line14"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="0.70999998"
|
||||
id="line24"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<g
|
||||
aria-label="Meltingplot MBL 308"
|
||||
id="text7532"
|
||||
style="font-size:40px;line-height:1.25;font-family:'Open Sans';-inkscape-font-specification:'Open Sans';letter-spacing:0px;word-spacing:0px;fill:#ffffff">
|
||||
<path
|
||||
d="m 2724.2009,1456.6195 -8.2812,-23.8476 h -0.1563 q 0.3321,5.3125 0.3321,9.9609 v 13.8867 h -4.2383 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1172,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27728" />
|
||||
<path
|
||||
d="m 2757.7166,1457.0101 q -5.0391,0 -7.8907,-2.9297 -2.832,-2.9492 -2.832,-8.1054 0,-5.293 2.6367,-8.3203 2.6367,-3.0274 7.2461,-3.0274 4.2774,0 6.7578,2.5977 2.4805,2.5976 2.4805,7.1484 v 2.4805 h -14.3945 q 0.098,3.1445 1.6992,4.8437 1.6015,1.6797 4.5117,1.6797 1.9141,0 3.5547,-0.3515 1.6601,-0.3711 3.5547,-1.211 v 3.7305 q -1.6797,0.8008 -3.3985,1.1328 -1.7187,0.332 -3.9257,0.332 z m -0.8399,-18.9062 q -2.1875,0 -3.5156,1.3867 -1.3086,1.3867 -1.5625,4.043 h 9.8047 q -0.039,-2.6758 -1.2891,-4.043 -1.25,-1.3867 -3.4375,-1.3867 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27730" />
|
||||
<path
|
||||
d="m 2775.9197,1456.6195 h -4.5899 v -30.3906 h 4.5899 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27732" />
|
||||
<path
|
||||
d="m 2790.5291,1453.2992 q 1.6796,0 3.3593,-0.5273 v 3.457 q -0.7617,0.332 -1.9726,0.5469 -1.1914,0.2343 -2.4805,0.2343 -6.5234,0 -6.5234,-6.875 v -11.6406 h -2.9493 v -2.0312 l 3.1641,-1.6797 1.5625,-4.5703 h 2.832 v 4.8046 h 6.1524 v 3.4766 h -6.1524 v 11.5625 q 0,1.6602 0.8204,2.4609 0.8398,0.7813 2.1875,0.7813 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27734" />
|
||||
<path
|
||||
d="m 2802.7947,1456.6195 h -4.5899 v -21.6016 h 4.5899 z m -4.8633,-27.3242 q 0,-1.2305 0.6641,-1.8945 0.6836,-0.6641 1.9336,-0.6641 1.2109,0 1.875,0.6641 0.6835,0.664 0.6835,1.8945 0,1.1719 -0.6835,1.8555 -0.6641,0.664 -1.875,0.664 -1.25,0 -1.9336,-0.664 -0.6641,-0.6836 -0.6641,-1.8555 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27736" />
|
||||
<path
|
||||
d="m 2828.3611,1456.6195 h -4.6094 v -13.2812 q 0,-2.5 -1.0156,-3.7305 -0.9961,-1.2305 -3.1836,-1.2305 -2.9102,0 -4.2578,1.7188 -1.3477,1.7187 -1.3477,5.7617 v 10.7617 h -4.5898 v -21.6016 h 3.5937 l 0.6446,2.8321 h 0.2343 q 0.9766,-1.543 2.7735,-2.3828 1.7968,-0.8399 3.9843,-0.8399 7.7735,0 7.7735,7.9102 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27738" />
|
||||
<path
|
||||
d="m 2852.99,1435.0179 v 2.5196 l -3.6914,0.6836 q 0.5078,0.6836 0.8398,1.6797 0.3321,0.9961 0.3321,2.1093 0,3.3399 -2.3047,5.2539 -2.3047,1.9141 -6.3477,1.9141 -1.0351,0 -1.875,-0.1562 -1.4844,0.9179 -1.4844,2.1484 0,0.7422 0.6836,1.1133 0.7032,0.3711 2.5586,0.3711 h 3.7696 q 3.5742,0 5.4296,1.5234 1.8555,1.5234 1.8555,4.3945 0,3.6719 -3.0273,5.6641 -3.0274,1.9922 -8.75,1.9922 -4.4141,0 -6.7383,-1.5625 -2.3242,-1.5625 -2.3242,-4.4531 0,-1.9922 1.25,-3.3594 1.2695,-1.3477 3.5351,-1.875 -0.9179,-0.3906 -1.5234,-1.25 -0.5859,-0.8789 -0.5859,-1.836 0,-1.2109 0.6835,-2.0507 0.6836,-0.8399 2.0313,-1.6602 -1.6797,-0.7226 -2.7344,-2.3437 -1.0351,-1.6407 -1.0351,-3.8282 0,-3.5156 2.207,-5.4492 2.2266,-1.9336 6.3281,-1.9336 0.918,0 1.9141,0.1367 1.0156,0.1172 1.5234,0.2539 z m -16.9727,24.961 q 0,1.4844 1.3282,2.2851 1.3476,0.8008 3.7695,0.8008 3.75,0 5.5859,-1.0742 1.836,-1.0742 1.836,-2.8516 0,-1.4062 -1.0157,-2.0117 -0.9961,-0.5859 -3.7304,-0.5859 h -3.4766 q -1.9726,0 -3.1445,0.918 -1.1524,0.9375 -1.1524,2.5195 z m 1.9727,-17.9688 q 0,2.0313 1.0351,3.125 1.0547,1.0938 3.0079,1.0938 3.9843,0 3.9843,-4.2578 0,-2.1094 -0.9961,-3.2422 -0.9765,-1.1524 -2.9882,-1.1524 -1.9922,0 -3.0274,1.1329 -1.0156,1.1328 -1.0156,3.3007 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27740" />
|
||||
<path
|
||||
d="m 2867.9509,1457.0101 q -4.1015,0 -6.3672,-2.9492 h -0.2734 q 0.2734,2.7344 0.2734,3.3203 v 8.8477 h -4.5898 v -31.211 h 3.7109 q 0.1563,0.6055 0.6446,2.8907 h 0.2343 q 2.1485,-3.2813 6.4454,-3.2813 4.0429,0 6.289,2.9297 2.2656,2.9297 2.2656,8.2227 0,5.2929 -2.3046,8.2617 -2.2852,2.9687 -6.3282,2.9687 z m -1.1133,-18.6328 q -2.7343,0 -4.0039,1.6016 -1.25,1.6015 -1.25,5.1172 v 0.6836 q 0,3.9453 1.25,5.7226 1.25,1.7578 4.0821,1.7578 2.3828,0 3.6718,-1.9531 1.2891,-1.9531 1.2891,-5.5664 0,-3.6328 -1.2891,-5.4883 -1.2695,-1.875 -3.75,-1.875 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27742" />
|
||||
<path
|
||||
d="m 2886.5056,1456.6195 h -4.5898 v -30.3906 h 4.5898 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27744" />
|
||||
<path
|
||||
d="m 2912.2283,1445.7797 q 0,5.2929 -2.7149,8.2617 -2.7148,2.9687 -7.5586,2.9687 -3.0273,0 -5.3515,-1.3672 -2.3242,-1.3671 -3.5742,-3.9257 -1.25,-2.5586 -1.25,-5.9375 0,-5.2539 2.6953,-8.2032 2.6953,-2.9492 7.5976,-2.9492 4.6875,0 7.4219,3.0274 2.7344,3.0078 2.7344,8.125 z m -15.7227,0 q 0,7.4804 5.5274,7.4804 5.4687,0 5.4687,-7.4804 0,-7.4024 -5.5078,-7.4024 -2.8906,0 -4.1992,1.9141 -1.2891,1.914 -1.2891,5.4883 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27746" />
|
||||
<path
|
||||
d="m 2925.5486,1453.2992 q 1.6797,0 3.3594,-0.5273 v 3.457 q -0.7618,0.332 -1.9727,0.5469 -1.1914,0.2343 -2.4805,0.2343 -6.5234,0 -6.5234,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.164,-1.6797 1.5625,-4.5703 h 2.8321 v 4.8046 h 6.1523 v 3.4766 h -6.1523 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8398,0.7813 2.1875,0.7813 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27748" />
|
||||
<path
|
||||
d="m 2956.447,1456.6195 -8.2812,-23.8476 h -0.1563 q 0.3321,5.3125 0.3321,9.9609 v 13.8867 h -4.2383 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1172,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27750" />
|
||||
<path
|
||||
d="m 2981.0173,1428.0648 h 8.4766 q 5.8984,0 8.5156,1.7188 2.6367,1.7187 2.6367,5.4297 0,2.5 -1.289,4.1601 -1.2891,1.6602 -3.711,2.0899 v 0.1953 q 3.0079,0.5664 4.4141,2.2461 1.4258,1.6601 1.4258,4.5117 0,3.8476 -2.6953,6.0351 -2.6758,2.168 -7.461,2.168 h -10.3125 z m 4.668,11.7969 h 4.4922 q 2.9297,0 4.2773,-0.918 1.3477,-0.9375 1.3477,-3.164 0,-2.0118 -1.4649,-2.9102 -1.4453,-0.8984 -4.6093,-0.8984 h -4.043 z m 0,3.7891 v 9.0429 h 4.9609 q 2.9297,0 4.4141,-1.1133 1.5039,-1.1328 1.5039,-3.5546 0,-2.2266 -1.5234,-3.3008 -1.5235,-1.0742 -4.6289,-1.0742 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27752" />
|
||||
<path
|
||||
d="m 3007.4236,1456.6195 v -28.5547 h 4.668 v 24.5508 h 12.0898 v 4.0039 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27754" />
|
||||
<path
|
||||
d="m 3055.7634,1434.6273 q 0,2.7149 -1.582,4.5313 -1.582,1.7968 -4.4531,2.4218 v 0.1563 q 3.4375,0.4297 5.1562,2.1484 1.7188,1.6993 1.7188,4.5313 0,4.1211 -2.9102,6.3672 -2.9101,2.2265 -8.2812,2.2265 -4.7461,0 -8.0078,-1.5429 v -4.0821 q 1.8164,0.8985 3.8476,1.3868 2.0313,0.4882 3.9063,0.4882 3.3203,0 4.9609,-1.2304 1.6406,-1.2305 1.6406,-3.8086 0,-2.2852 -1.8164,-3.3594 -1.8164,-1.0742 -5.7031,-1.0742 h -2.4805 v -3.7305 h 2.5196 q 6.8359,0 6.8359,-4.7266 0,-1.8359 -1.1914,-2.832 -1.1914,-0.9961 -3.5156,-0.9961 -1.6211,0 -3.125,0.4688 -1.5039,0.4492 -3.5547,1.7773 l -2.2461,-3.2031 q 3.9258,-2.8906 9.1211,-2.8906 4.3164,0 6.7383,1.8554 2.4218,1.8555 2.4218,5.1172 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27756" />
|
||||
<path
|
||||
d="m 3079.6697,1442.3422 q 0,7.4414 -2.4024,11.0547 -2.3828,3.6132 -7.3047,3.6132 -4.7656,0 -7.2265,-3.7304 -2.461,-3.7305 -2.461,-10.9375 0,-7.5586 2.3829,-11.1328 2.4023,-3.5938 7.3046,-3.5938 4.7852,0 7.2461,3.75 2.461,3.75 2.461,10.9766 z m -14.7461,0 q 0,5.8398 1.1914,8.3398 1.2109,2.5 3.8476,2.5 2.6368,0 3.8477,-2.5391 1.2305,-2.539 1.2305,-8.3007 0,-5.7422 -1.2305,-8.3008 -1.2109,-2.5781 -3.8477,-2.5781 -2.6367,0 -3.8476,2.5195 -1.1914,2.5195 -1.1914,8.3594 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27758" />
|
||||
<path
|
||||
d="m 3092.7947,1427.6937 q 4.0625,0 6.4258,1.875 2.3632,1.8555 2.3632,4.9805 0,4.3945 -5.2734,6.9922 3.3594,1.6797 4.7656,3.5351 1.4258,1.8555 1.4258,4.1407 0,3.5351 -2.5976,5.664 -2.5977,2.1289 -7.0313,2.1289 -4.6484,0 -7.207,-1.9922 -2.5586,-1.9921 -2.5586,-5.6445 0,-2.3828 1.3281,-4.2773 1.3477,-1.9141 4.3945,-3.3985 -2.6172,-1.5625 -3.7304,-3.3007 -1.1133,-1.7383 -1.1133,-3.9063 0,-3.1055 2.4414,-4.9414 2.4414,-1.8555 6.3672,-1.8555 z m -5.293,21.5235 q 0,2.0312 1.4258,3.164 1.4258,1.1133 3.8672,1.1133 2.5195,0 3.9062,-1.1523 1.4063,-1.1719 1.4063,-3.1641 0,-1.582 -1.2891,-2.8906 -1.289,-1.3086 -3.9062,-2.4219 l -0.5664,-0.2539 q -2.5782,1.1328 -3.711,2.5 -1.1328,1.3477 -1.1328,3.1055 z m 5.2539,-17.9883 q -1.9531,0 -3.1445,0.9765 -1.1914,0.9571 -1.1914,2.6172 0,1.0157 0.4297,1.8164 0.4297,0.8008 1.25,1.4649 0.8203,0.6445 2.7734,1.5625 2.3438,-1.0352 3.3008,-2.168 0.9765,-1.1523 0.9765,-2.6758 0,-1.6601 -1.2109,-2.6172 -1.1914,-0.9765 -3.1836,-0.9765 z"
|
||||
style="font-weight:600;-inkscape-font-specification:'Open Sans Semi-Bold'"
|
||||
id="path27760" />
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 12 KiB |
@@ -0,0 +1,158 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
width="3174.8032"
|
||||
height="1530.7086"
|
||||
viewBox="0 0 3174.8032 1530.7086"
|
||||
version="1.1"
|
||||
id="svg338"
|
||||
sodipodi:docname="printbed_outline_480.svg"
|
||||
inkscape:version="1.1 (c68e22c387, 2021-05-23)"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/">
|
||||
<metadata
|
||||
id="metadata344">
|
||||
<rdf:RDF>
|
||||
<cc:Work
|
||||
rdf:about="">
|
||||
<dc:format>image/svg+xml</dc:format>
|
||||
<dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
|
||||
<dc:title>MBL133</dc:title>
|
||||
</cc:Work>
|
||||
</rdf:RDF>
|
||||
</metadata>
|
||||
<defs
|
||||
id="defs342" />
|
||||
<sodipodi:namedview
|
||||
pagecolor="#ffffff"
|
||||
bordercolor="#666666"
|
||||
borderopacity="1"
|
||||
objecttolerance="10"
|
||||
gridtolerance="10"
|
||||
guidetolerance="10"
|
||||
inkscape:pageopacity="0"
|
||||
inkscape:pageshadow="2"
|
||||
inkscape:window-width="1920"
|
||||
inkscape:window-height="1017"
|
||||
id="namedview340"
|
||||
showgrid="false"
|
||||
units="px"
|
||||
scale-x="1"
|
||||
inkscape:zoom="3.1641221"
|
||||
inkscape:cx="2949.7913"
|
||||
inkscape:cy="1444.7925"
|
||||
inkscape:window-x="-8"
|
||||
inkscape:window-y="-8"
|
||||
inkscape:window-maximized="1"
|
||||
inkscape:current-layer="svg338"
|
||||
inkscape:pagecheckerboard="0"
|
||||
height="1530.7086px" />
|
||||
<title
|
||||
id="title2">MBL133</title>
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="1530,70862"
|
||||
id="line4"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="0.70999998"
|
||||
id="line10"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="0.70999998"
|
||||
y1="1530,70862"
|
||||
x2="3174"
|
||||
y2="1530,70862"
|
||||
id="line14"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<line
|
||||
x1="3174"
|
||||
y1="0.70999998"
|
||||
x2="0.70999998"
|
||||
y2="0.70999998"
|
||||
id="line24"
|
||||
style="fill:none;stroke:#ffffff;stroke-width:1.42;stroke-linecap:round;stroke-linejoin:round" />
|
||||
<g
|
||||
aria-label="Meltingplot MBL 480"
|
||||
id="text3543"
|
||||
style="font-weight:600;font-size:40px;line-height:1.25;font-family:'Open Sans';-inkscape-font-specification:'Open Sans, Semi-Bold';letter-spacing:0px;word-spacing:0px;stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1">
|
||||
<path
|
||||
d="m 2724.3225,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path9679"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2757.8381,1456.952 q -5.039,0 -7.8906,-2.9297 -2.832,-2.9492 -2.832,-8.1054 0,-5.293 2.6367,-8.3203 2.6367,-3.0274 7.2461,-3.0274 4.2773,0 6.7578,2.5977 2.4805,2.5976 2.4805,7.1484 v 2.4805 h -14.3946 q 0.098,3.1445 1.6993,4.8437 1.6015,1.6797 4.5117,1.6797 1.914,0 3.5547,-0.3515 1.6601,-0.3711 3.5547,-1.211 v 3.7305 q -1.6797,0.8008 -3.3985,1.1328 -1.7187,0.332 -3.9258,0.332 z m -0.8398,-18.9062 q -2.1875,0 -3.5156,1.3867 -1.3086,1.3867 -1.5625,4.043 h 9.8047 q -0.039,-2.6758 -1.2891,-4.043 -1.25,-1.3867 -3.4375,-1.3867 z"
|
||||
id="path9681"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2776.0413,1456.5614 h -4.5899 v -30.3906 h 4.5899 z"
|
||||
id="path9683"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2790.6506,1453.2411 q 1.6797,0 3.3594,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1915,0.2343 -2.4805,0.2343 -6.5235,0 -6.5235,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.1641,-1.6797 1.5625,-4.5703 h 2.832 v 4.8046 h 6.1524 v 3.4766 h -6.1524 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8399,0.7813 2.1875,0.7813 z"
|
||||
id="path9685"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2802.9163,1456.5614 h -4.5899 v -21.6016 h 4.5899 z m -4.8633,-27.3242 q 0,-1.2305 0.664,-1.8945 0.6836,-0.6641 1.9336,-0.6641 1.211,0 1.875,0.6641 0.6836,0.664 0.6836,1.8945 0,1.1719 -0.6836,1.8555 -0.664,0.664 -1.875,0.664 -1.25,0 -1.9336,-0.664 -0.664,-0.6836 -0.664,-1.8555 z"
|
||||
id="path9687"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2828.4827,1456.5614 h -4.6094 v -13.2812 q 0,-2.5 -1.0156,-3.7305 -0.9961,-1.2305 -3.1836,-1.2305 -2.9102,0 -4.2578,1.7188 -1.3477,1.7187 -1.3477,5.7617 v 10.7617 h -4.5898 v -21.6016 h 3.5937 l 0.6445,2.8321 h 0.2344 q 0.9766,-1.543 2.7735,-2.3828 1.7968,-0.8399 3.9843,-0.8399 7.7735,0 7.7735,7.9102 z"
|
||||
id="path9689"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2853.1116,1434.9598 v 2.5196 l -3.6914,0.6836 q 0.5078,0.6836 0.8398,1.6797 0.332,0.996 0.332,2.1093 0,3.3399 -2.3046,5.2539 -2.3047,1.9141 -6.3477,1.9141 -1.0352,0 -1.875,-0.1563 -1.4844,0.918 -1.4844,2.1485 0,0.7422 0.6836,1.1133 0.7031,0.3711 2.5586,0.3711 h 3.7695 q 3.5743,0 5.4297,1.5234 1.8555,1.5234 1.8555,4.3945 0,3.6719 -3.0273,5.6641 -3.0274,1.9922 -8.75,1.9922 -4.4141,0 -6.7383,-1.5625 -2.3242,-1.5625 -2.3242,-4.4531 0,-1.9922 1.25,-3.3594 1.2695,-1.3477 3.5351,-1.875 -0.918,-0.3906 -1.5234,-1.25 -0.586,-0.8789 -0.586,-1.836 0,-1.2109 0.6836,-2.0507 0.6836,-0.8399 2.0313,-1.6602 -1.6797,-0.7227 -2.7344,-2.3437 -1.0352,-1.6407 -1.0352,-3.8282 0,-3.5156 2.2071,-5.4492 2.2265,-1.9336 6.3281,-1.9336 0.918,0 1.9141,0.1367 1.0156,0.1172 1.5234,0.2539 z m -16.9727,24.961 q 0,1.4844 1.3281,2.2851 1.3477,0.8008 3.7696,0.8008 3.75,0 5.5859,-1.0742 1.8359,-1.0742 1.8359,-2.8516 0,-1.4062 -1.0156,-2.0117 -0.9961,-0.5859 -3.7304,-0.5859 h -3.4766 q -1.9727,0 -3.1445,0.9179 -1.1524,0.9375 -1.1524,2.5196 z m 1.9727,-17.9688 q 0,2.0313 1.0351,3.125 1.0547,1.0938 3.0078,1.0938 3.9844,0 3.9844,-4.2578 0,-2.1094 -0.9961,-3.2422 -0.9765,-1.1524 -2.9883,-1.1524 -1.9921,0 -3.0273,1.1328 -1.0156,1.1329 -1.0156,3.3008 z"
|
||||
id="path9691"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2868.0725,1456.952 q -4.1016,0 -6.3672,-2.9492 h -0.2734 q 0.2734,2.7344 0.2734,3.3203 v 8.8477 h -4.5898 v -31.211 h 3.7109 q 0.1563,0.6055 0.6445,2.8907 h 0.2344 q 2.1485,-3.2813 6.4453,-3.2813 4.043,0 6.2891,2.9297 2.2656,2.9297 2.2656,8.2227 0,5.2929 -2.3047,8.2617 -2.2851,2.9687 -6.3281,2.9687 z m -1.1133,-18.6328 q -2.7343,0 -4.0039,1.6016 -1.25,1.6015 -1.25,5.1172 v 0.6836 q 0,3.9453 1.25,5.7226 1.25,1.7578 4.0821,1.7578 2.3828,0 3.6718,-1.9531 1.2891,-1.9531 1.2891,-5.5664 0,-3.6328 -1.2891,-5.4883 -1.2695,-1.875 -3.75,-1.875 z"
|
||||
id="path9693"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2886.6272,1456.5614 h -4.5898 v -30.3906 h 4.5898 z"
|
||||
id="path9695"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2912.3499,1445.7216 q 0,5.2929 -2.7149,8.2617 -2.7148,2.9687 -7.5586,2.9687 -3.0273,0 -5.3515,-1.3672 -2.3243,-1.3671 -3.5743,-3.9257 -1.25,-2.5586 -1.25,-5.9375 0,-5.2539 2.6953,-8.2032 2.6954,-2.9492 7.5977,-2.9492 4.6875,0 7.4219,3.0274 2.7344,3.0078 2.7344,8.125 z m -15.7227,0 q 0,7.4804 5.5273,7.4804 5.4688,0 5.4688,-7.4804 0,-7.4024 -5.5078,-7.4024 -2.8906,0 -4.1992,1.9141 -1.2891,1.914 -1.2891,5.4883 z"
|
||||
id="path9697"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2925.6702,1453.2411 q 1.6797,0 3.3593,-0.5274 v 3.4571 q -0.7617,0.332 -1.9726,0.5469 -1.1914,0.2343 -2.4805,0.2343 -6.5234,0 -6.5234,-6.875 v -11.6406 h -2.9492 v -2.0312 l 3.164,-1.6797 1.5625,-4.5703 h 2.8321 v 4.8046 h 6.1523 v 3.4766 h -6.1523 v 11.5625 q 0,1.6602 0.8203,2.4609 0.8398,0.7813 2.1875,0.7813 z"
|
||||
id="path9699"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2956.5686,1456.5614 -8.2812,-23.8477 h -0.1563 q 0.332,5.3125 0.332,9.961 v 13.8867 h -4.2382 v -28.5547 h 6.582 l 7.9297,22.7149 h 0.1172 l 8.164,-22.7149 h 6.6016 v 28.5547 h -4.4922 v -14.1211 q 0,-2.1289 0.098,-5.5469 0.1171,-3.4179 0.1953,-4.1406 h -0.1563 l -8.5742,23.8086 z"
|
||||
id="path9701"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 2981.1389,1428.0067 h 8.4766 q 5.8984,0 8.5156,1.7188 2.6367,1.7187 2.6367,5.4297 0,2.5 -1.289,4.1601 -1.2891,1.6602 -3.711,2.0899 v 0.1953 q 3.0078,0.5664 4.4141,2.2461 1.4258,1.6601 1.4258,4.5117 0,3.8476 -2.6953,6.0351 -2.6758,2.168 -7.461,2.168 h -10.3125 z m 4.668,11.7969 h 4.4922 q 2.9297,0 4.2773,-0.918 1.3477,-0.9375 1.3477,-3.164 0,-2.0118 -1.4649,-2.9102 -1.4453,-0.8984 -4.6093,-0.8984 h -4.043 z m 0,3.7891 v 9.0429 h 4.9609 q 2.9297,0 4.4141,-1.1133 1.5039,-1.1328 1.5039,-3.5546 0,-2.2266 -1.5234,-3.3008 -1.5235,-1.0742 -4.629,-1.0742 z"
|
||||
id="path9703"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3007.5452,1456.5614 v -28.5547 h 4.6679 v 24.5508 h 12.0899 v 4.0039 z"
|
||||
id="path9705"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3057.9749,1450.3309 h -3.8477 v 6.2305 h -4.4727 v -6.2305 h -13.0468 v -3.5351 l 13.0468,-18.8672 h 4.4727 v 18.5937 h 3.8477 z m -8.3204,-3.8086 v -7.1679 q 0,-3.8282 0.1954,-6.2696 h -0.1563 q -0.5469,1.2891 -1.7187,3.125 l -7.0899,10.3125 z"
|
||||
id="path9707"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3070.0842,1427.6356 q 4.0625,0 6.4258,1.875 2.3633,1.8555 2.3633,4.9805 0,4.3945 -5.2734,6.9922 3.3593,1.6797 4.7656,3.5351 1.4258,1.8555 1.4258,4.1407 0,3.5351 -2.5977,5.664 -2.5977,2.1289 -7.0312,2.1289 -4.6485,0 -7.2071,-1.9922 -2.5586,-1.9921 -2.5586,-5.6445 0,-2.3828 1.3282,-4.2773 1.3476,-1.9141 4.3945,-3.3985 -2.6172,-1.5625 -3.7305,-3.3008 -1.1133,-1.7382 -1.1133,-3.9062 0,-3.1055 2.4414,-4.9414 2.4414,-1.8555 6.3672,-1.8555 z m -5.2929,21.5235 q 0,2.0312 1.4257,3.164 1.4258,1.1133 3.8672,1.1133 2.5196,0 3.9063,-1.1523 1.4062,-1.1719 1.4062,-3.1641 0,-1.582 -1.289,-2.8906 -1.2891,-1.3086 -3.9063,-2.4219 l -0.5664,-0.2539 q -2.5781,1.1328 -3.7109,2.5 -1.1328,1.3476 -1.1328,3.1055 z m 5.2539,-17.9883 q -1.9532,0 -3.1446,0.9765 -1.1914,0.9571 -1.1914,2.6172 0,1.0157 0.4297,1.8164 0.4297,0.8008 1.25,1.4649 0.8203,0.6445 2.7735,1.5625 2.3437,-1.0352 3.3007,-2.168 0.9766,-1.1523 0.9766,-2.6758 0,-1.6601 -1.2109,-2.6172 -1.1914,-0.9765 -3.1836,-0.9765 z"
|
||||
id="path9709"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
<path
|
||||
d="m 3102.6233,1442.2841 q 0,7.4414 -2.4024,11.0546 -2.3828,3.6133 -7.3046,3.6133 -4.7657,0 -7.2266,-3.7304 -2.4609,-3.7305 -2.4609,-10.9375 0,-7.5586 2.3828,-11.1329 2.4023,-3.5937 7.3047,-3.5937 4.7851,0 7.2461,3.75 2.4609,3.75 2.4609,10.9766 z m -14.7461,0 q 0,5.8398 1.1914,8.3398 1.2109,2.5 3.8477,2.5 2.6367,0 3.8476,-2.5391 1.2305,-2.539 1.2305,-8.3007 0,-5.7422 -1.2305,-8.3008 -1.2109,-2.5781 -3.8476,-2.5781 -2.6368,0 -3.8477,2.5195 -1.1914,2.5195 -1.1914,8.3594 z"
|
||||
id="path9711"
|
||||
style="stroke:#ffffff;stroke-opacity:1;fill:#ffffff;fill-opacity:1" />
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 12 KiB |
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine 0.4 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "AbSOyKLL1fGceKJM",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.18",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine 0.4 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_04_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "WF0wYUMc1HUHPyVQ",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.18",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.22mm Standard 0.4 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "VcfzH7aF20ZWOOYV",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.22",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.22mm Standard 0.4 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_04_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "DBfImXEv3jTUnz38",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.22",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft 0.4 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ayivk0vSz22TMNWt",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft 0.4 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_04_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "8L1fc1MCGM2mjVNz",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.4 nozzle",
|
||||
"Meltingplot MBL 136 0.4 nozzle",
|
||||
"Meltingplot MBL 308 0.4 nozzle",
|
||||
"Meltingplot MBL 480 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine 0.6 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "KrZSDq4Tsnlnu0Dm",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine 0.6 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_06_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "9PDbCLSnBEocONzB",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Optimal 0.6 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "RrsJ1yXD61T1Sk2u",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.28",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Optimal 0.6 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_06_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ewObaiyN5k5Jl17T",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.28",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard 0.6 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_06_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "6exgbZxVLHjH3Bhd",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.30",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Fine 0.8 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "HSqTmgZq9mxKpWzq",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.32",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard 0.6 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "XwPZzRvdwc0DXrra",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.32",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.34mm Fine 0.8 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_08_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "XVRHVR0F8UrpWAeP",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.34",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft 0.6 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_small_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "DJrJd7eeeDrg1eIB",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.36",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft 0.6 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_06_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "pP8Zt262xUXoBAJe",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.36",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.6 nozzle",
|
||||
"Meltingplot MBL 136 0.6 nozzle",
|
||||
"Meltingplot MBL 308 0.6 nozzle",
|
||||
"Meltingplot MBL 480 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Optimal 0.8 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "KLnV7sCKomrmvKxU",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.36",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Optimal 0.8 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_08_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "WpPpQuf0jWaXQaPU",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.36",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.44mm Fine 1.0 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "QLMHgE0vHGQWiuz7",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.44",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.44mm Fine 1.0 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_10_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "tjLfITsaMySQV6OC",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.44",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.44mm Standard 0.8 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "hWhLDO3U3oxN4Fft",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.44",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.44mm Standard 0.8 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_08_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "DwHyBcmitGuE8FHo",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.44",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft 0.8 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GOHOEUcXvTSJmiWy",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft 0.8 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_08_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "ILOl5sbVzIs5XYVE",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 0.8 nozzle",
|
||||
"Meltingplot MBL 136 0.8 nozzle",
|
||||
"Meltingplot MBL 308 0.8 nozzle",
|
||||
"Meltingplot MBL 480 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Fine 1.2 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "yzaZIGtEhvf2GGbl",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Fine 1.2 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_12_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "erJDLPP5pRQnGwoJ",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 1.2 nozzle",
|
||||
"Meltingplot MBL 136 1.2 nozzle",
|
||||
"Meltingplot MBL 308 1.2 nozzle",
|
||||
"Meltingplot MBL 480 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Optimal 1.0 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "dZw2B5t8nN5lhyXI",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Optimal 1.0 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_10_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "5wtjDWniGYAAtn79",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.52mm Standard 1.0 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "BlX2VZazls3H825o",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.52",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+15
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.52mm Standard 1.0 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_10_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "PgHZovtokXPswrf7",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.52",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Draft 1.0 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "zLCv34qfWGNOtZWf",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.56",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Draft 1.0 nozzle @Meltingplot MBL",
|
||||
"inherits": "fdm_process_meltingplot_mbl_10_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "GnchMrLdOpeDZuWh",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.56",
|
||||
"compatible_printers": [
|
||||
"Meltingplot MBL 133 1.0 nozzle",
|
||||
"Meltingplot MBL 136 1.0 nozzle",
|
||||
"Meltingplot MBL 308 1.0 nozzle",
|
||||
"Meltingplot MBL 480 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
+12
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Optimal 1.2 nozzle @Meltingplot CHX 350",
|
||||
"inherits": "fdm_process_meltingplot_chx_large_nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "l6wYSAIFuyQFgT5X",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.56",
|
||||
"compatible_printers": [
|
||||
"Meltingplot CHX 350 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user