From 0028e65763d51d2e7e6a8105b54205d2b6978fec Mon Sep 17 00:00:00 2001 From: SoftFever Date: Thu, 1 Oct 2026 00:51:50 +0800 Subject: [PATCH] revert profile changes --- resources/profiles/Snapmaker.json | 138 +-------- .../filament/Generic PETG @U1 0.2 nozzle.json | 24 -- .../filament/Generic PETG @U1 0.4 nozzle.json | 24 -- .../filament/Generic PETG @U1 0.6 nozzle.json | 24 -- .../filament/Generic PETG @U1 0.8 nozzle.json | 24 -- .../Generic PETG HF @U1 0.2 nozzle.json | 24 -- .../Generic PETG HF @U1 0.4 nozzle.json | 24 -- .../Generic PETG HF @U1 0.6 nozzle.json | 24 -- .../Generic PETG HF @U1 0.8 nozzle.json | 24 -- .../Generic PETG-CF @U1 0.4 nozzle.json | 24 -- .../Generic PETG-CF @U1 0.6 nozzle.json | 20 -- .../Generic PETG-CF @U1 0.8 nozzle.json | 20 -- .../filament/Generic PLA @U1 0.2 nozzle.json | 24 -- .../filament/Generic PLA @U1 0.4 nozzle.json | 24 -- .../filament/Generic PLA @U1 0.6 nozzle.json | 24 -- .../filament/Generic PLA @U1 0.8 nozzle.json | 24 -- ...Generic PLA High Speed @U1 0.2 nozzle.json | 24 -- ...Generic PLA High Speed @U1 0.4 nozzle.json | 24 -- ...Generic PLA High Speed @U1 0.6 nozzle.json | 24 -- ...Generic PLA High Speed @U1 0.8 nozzle.json | 24 -- .../Generic PLA Silk @U1 0.2 nozzle.json | 24 -- .../Generic PLA Silk @U1 0.4 nozzle.json | 20 -- .../Generic PLA Silk @U1 0.6 nozzle.json | 20 -- .../Generic PLA Silk @U1 0.8 nozzle.json | 20 -- .../Generic PLA-CF @U1 0.4 nozzle.json | 24 -- .../Generic PLA-CF @U1 0.6 nozzle.json | 24 -- .../Generic PLA-CF @U1 0.8 nozzle.json | 24 -- .../filament/Generic TPU @U1 0.4 nozzle.json | 20 -- .../filament/Generic TPU @U1 0.6 nozzle.json | 20 -- .../filament/Generic TPU @U1 0.8 nozzle.json | 20 -- .../Polymaker General PLA Family @U1.json | 14 +- .../Polymaker Silk PLA Family @U1.json | 14 +- .../Polymaker Tough PLA Family @U1.json | 12 +- .../Fiberon ASA-CF08 @Snapmaker U1.json | 13 +- .../Fiberon PA12-CF10 @Snapmaker U1.json | 16 +- .../Fiberon PA6-CF20 @Snapmaker U1.json | 16 +- .../Fiberon PA612-ESD @Snapmaker U1.json | 15 +- .../Fiberon PETG-ESD @Snapmaker U1.json | 13 +- .../Fiberon PPS-GF20 @Snapmaker U1.json | 14 +- .../Panchroma CoPE @Snapmaker U1.json | 13 +- .../Panchroma PLA @Snapmaker U1.json | 14 +- ...Panchroma PLA Celestial @Snapmaker U1.json | 13 +- .../Panchroma PLA Galaxy @Snapmaker U1.json | 13 +- .../Panchroma PLA Glow @Snapmaker U1.json | 13 +- .../Panchroma PLA Luminous @Snapmaker U1.json | 13 +- .../Panchroma PLA Marble @Snapmaker U1.json | 13 +- .../Panchroma PLA Matte @Snapmaker U1.json | 13 +- .../Panchroma PLA Metallic @Snapmaker U1.json | 13 +- .../Panchroma PLA Neon @Snapmaker U1.json | 13 +- .../Panchroma PLA Satin @Snapmaker U1.json | 13 +- .../Panchroma PLA Silk @Snapmaker U1.json | 13 +- ...Panchroma PLA Starlight @Snapmaker U1.json | 13 +- ...anchroma PLA Temp Shift @Snapmaker U1.json | 24 +- ...nchroma PLA Translucent @Snapmaker U1.json | 13 +- .../Panchroma PLA UV Shift @Snapmaker U1.json | 13 +- .../PolyLite CosPLA @Snapmaker U1.json | 12 +- .../PolyLite PETG @Snapmaker U1.json | 13 +- ...lyLite PETG Translucent @Snapmaker U1.json | 13 +- .../Polymaker/PolyLite PLA @Snapmaker U1.json | 13 +- .../PolyLite PLA Galaxy @Snapmaker U1.json | 12 +- .../PolyLite PLA Glow @Snapmaker U1.json | 12 +- .../PolyLite PLA Luminous @Snapmaker U1.json | 12 +- .../PolyLite PLA Neon @Snapmaker U1.json | 12 +- .../PolyLite PLA Pro @Snapmaker U1.json | 24 +- ...lyLite PLA Pro Metallic @Snapmaker U1.json | 13 +- .../PolyLite PLA Starlight @Snapmaker U1.json | 12 +- ...olyLite PLA Translucent @Snapmaker U1.json | 12 +- .../PolyTerra PLA @Snapmaker U1.json | 13 +- .../PolyTerra PLA Marble @Snapmaker U1.json | 12 +- .../PolyTerra PLA+ @Snapmaker U1.json | 12 +- .../Polymaker HT-PLA @Snapmaker U1.json | 13 +- .../Polymaker HT-PLA-GF @Snapmaker U1.json | 13 +- .../Polymaker PETG @Snapmaker U1.json | 12 +- .../Polymaker PETG Galaxy @Snapmaker U1.json | 12 +- .../Polymaker PLA @Snapmaker U1.json | 12 +- .../Polymaker PLA Pro @Snapmaker U1.json | 12 +- ...ymaker PLA Pro Metallic @Snapmaker U1.json | 12 +- .../Snapmaker/filament/Snapmaker ABS @U1.json | 60 +--- .../filament/Snapmaker ABS Benchy @U1.json | 21 +- .../Snapmaker/filament/Snapmaker ASA @U1.json | 60 +--- ...akaway Support For PLA @U1 0.2 nozzle.json | 33 +-- ...akaway Support For PLA @U1 0.6 nozzle.json | 33 +-- ...akaway Support For PLA @U1 0.8 nozzle.json | 31 +- ...apmaker Breakaway Support For PLA @U1.json | 33 +-- .../filament/Snapmaker PA-CF @U1.json | 11 +- .../Snapmaker/filament/Snapmaker PET @U1.json | 11 +- .../filament/Snapmaker PETG @U1.json | 11 +- .../Snapmaker PETG HF @U1 0.2 nozzle.json | 44 +-- .../Snapmaker PETG HF @U1 0.4 nozzle.json | 92 ------ .../Snapmaker PETG HF @U1 0.6 nozzle.json | 44 +-- .../Snapmaker PETG HF @U1 0.8 nozzle.json | 44 +-- ...maker PETG Translucent @U1 0.2 nozzle.json | 38 +-- ...maker PETG Translucent @U1 0.4 nozzle.json | 34 +-- ...maker PETG Translucent @U1 0.6 nozzle.json | 37 +-- ...maker PETG Translucent @U1 0.8 nozzle.json | 36 +-- .../filament/Snapmaker PETG-CF @U1.json | 79 +---- .../Snapmaker/filament/Snapmaker PLA @U1.json | 11 +- .../filament/Snapmaker PLA Basic @U1.json | 63 ++-- .../filament/Snapmaker PLA Eco @U1.json | 11 +- ...aker PLA Full Spectrum @U1 0.4 nozzle.json | 71 ++--- .../Snapmaker PLA Glow @U1 0.4 nozzle.json | 35 +-- .../filament/Snapmaker PLA Lite @U1.json | 62 ++-- .../Snapmaker PLA Matte @U1 0.2 nozzle.json | 67 ++--- .../Snapmaker PLA Matte @U1 0.6 nozzle.json | 65 +--- .../Snapmaker PLA Matte @U1 0.8 nozzle.json | 65 +--- .../filament/Snapmaker PLA Matte @U1.json | 91 +++--- .../filament/Snapmaker PLA Metal @U1.json | 11 +- .../Snapmaker PLA Silk @U1 0.2 nozzle.json | 55 +--- .../Snapmaker PLA Silk @U1 0.6 nozzle.json | 55 +--- .../Snapmaker PLA Silk @U1 0.8 nozzle.json | 55 +--- .../filament/Snapmaker PLA Silk @U1.json | 61 +--- ...napmaker PLA SnapSpeed @U1 0.2 nozzle.json | 24 +- ...napmaker PLA SnapSpeed @U1 0.6 nozzle.json | 25 +- ...napmaker PLA SnapSpeed @U1 0.8 nozzle.json | 23 +- .../filament/Snapmaker PLA SnapSpeed @U1.json | 69 ++--- ...pmaker PLA Translucent @U1 0.2 nozzle.json | 73 +++-- ...pmaker PLA Translucent @U1 0.4 nozzle.json | 81 ++--- ...pmaker PLA Translucent @U1 0.6 nozzle.json | 79 ++--- ...pmaker PLA Translucent @U1 0.8 nozzle.json | 77 ++--- .../Snapmaker PLA Wood @U1 0.4 nozzle.json | 40 +-- .../Snapmaker PLA Wood @U1 0.6 nozzle.json | 36 +-- .../Snapmaker PLA Wood @U1 0.8 nozzle.json | 34 +-- .../Snapmaker PLA-CF @U1 0.4 nozzle.json | 55 +--- .../Snapmaker PLA-CF @U1 0.6 nozzle.json | 47 +-- .../Snapmaker PLA-CF @U1 0.8 nozzle.json | 46 +-- .../Snapmaker PVA @U1 0.6 nozzle.json | 35 +-- .../Snapmaker PVA @U1 0.8 nozzle.json | 33 +-- .../Snapmaker/filament/Snapmaker PVA @U1.json | 41 +-- .../Snapmaker/filament/Snapmaker TPE @U1.json | 14 +- .../Snapmaker TPU 90A @U1 0.6 nozzle.json | 42 +-- .../Snapmaker TPU 90A @U1 0.8 nozzle.json | 42 +-- .../filament/Snapmaker TPU 90A @U1.json | 41 +-- .../filament/Snapmaker TPU 95A @U1.json | 70 ++--- .../Snapmaker TPU 95A HF @U1 0.6 nozzle.json | 39 +-- .../Snapmaker TPU 95A HF @U1 0.8 nozzle.json | 39 +-- .../filament/Snapmaker TPU 95A HF @U1.json | 40 +-- .../Snapmaker/filament/Snapmaker TPU @U1.json | 17 +- .../filament/Snapmaker TPU High-Flow @U1.json | 17 +- .../Snapmaker U1 (0.2 High Flow nozzle).json | 49 --- .../machine/Snapmaker U1 (0.2 nozzle).json | 12 +- .../Snapmaker U1 (0.4 High Flow nozzle).json | 49 --- .../machine/Snapmaker U1 (0.4 nozzle).json | 12 +- .../Snapmaker U1 (0.4+0.6 nozzle).json | 6 - .../Snapmaker U1 (0.6 High Flow nozzle).json | 49 --- .../machine/Snapmaker U1 (0.6 nozzle).json | 12 +- .../Snapmaker U1 (0.8 High Flow nozzle).json | 49 --- .../machine/Snapmaker U1 (0.8 nozzle).json | 12 +- .../Snapmaker/machine/Snapmaker U1.json | 4 +- .../profiles/Snapmaker/machine/fdm_U1.json | 26 +- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 100 +------ ...6 Standard @Snapmaker U1 (0.2 nozzle).json | 77 +---- ...Extra Fine @Snapmaker U1 (0.4 nozzle).json | 78 +---- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 100 +------ ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 125 +------- ...8 Standard @Snapmaker U1 (0.2 nozzle).json | 77 +---- ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 100 +------ ...0 Standard @Snapmaker U1 (0.2 nozzle).json | 75 +---- .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 125 +------- ...2 Standard @Snapmaker U1 (0.2 nozzle).json | 77 +---- ...4 Standard @Snapmaker U1 (0.2 nozzle).json | 77 +---- ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 125 +------- ...16 Optimal @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...8 Standard @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...20 Quality @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...0 Standard @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 77 +---- ...0 Strength @Snapmaker U1 (0.4 nozzle).json | 78 +---- ...20 Support @Snapmaker U1 (0.4 nozzle).json | 77 +---- ... Support W @Snapmaker U1 (0.4 nozzle).json | 78 +---- ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...4 Standard @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...4 Standard @Snapmaker U1 (0.8 nozzle).json | 88 +----- ....25 Benchy @Snapmaker U1 (0.4 nozzle).json | 278 ++---------------- ...xtra Draft @Snapmaker U1 (0.4 nozzle).json | 77 +---- ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json | 79 +---- ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...0 Strength @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...2 Standard @Snapmaker U1 (0.8 nozzle).json | 88 +----- ...6 Standard @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...xtra Draft @Snapmaker U1 (0.6 nozzle).json | 81 +---- ...0 Standard @Snapmaker U1 (0.8 nozzle).json | 88 +----- ...2 Standard @Snapmaker U1 (0.6 nozzle).json | 88 +----- ...8 Standard @Snapmaker U1 (0.8 nozzle).json | 88 +----- ...6 Standard @Snapmaker U1 (0.8 nozzle).json | 77 +---- .../Snapmaker/process/fdm_process_U1.json | 2 +- 186 files changed, 952 insertions(+), 6774 deletions(-) delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json delete mode 100644 resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json delete mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json delete mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json delete mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json delete mode 100644 resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index 4d63c1b085..d13ed8bf21 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.23", + "version": "02.04.00.16", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ @@ -1448,10 +1448,6 @@ "name": "Snapmaker PETG HF @U1 0.2 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json" }, - { - "name": "Snapmaker PETG HF @U1 0.4 nozzle", - "sub_path": "filament/Snapmaker PETG HF @U1 0.4 nozzle.json" - }, { "name": "Snapmaker PETG HF @U1 0.6 nozzle", "sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json" @@ -1924,122 +1920,6 @@ "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json" }, - { - "name": "Generic PETG @U1 0.2 nozzle", - "sub_path": "filament/Generic PETG @U1 0.2 nozzle.json" - }, - { - "name": "Generic PETG @U1 0.4 nozzle", - "sub_path": "filament/Generic PETG @U1 0.4 nozzle.json" - }, - { - "name": "Generic PETG @U1 0.6 nozzle", - "sub_path": "filament/Generic PETG @U1 0.6 nozzle.json" - }, - { - "name": "Generic PETG @U1 0.8 nozzle", - "sub_path": "filament/Generic PETG @U1 0.8 nozzle.json" - }, - { - "name": "Generic PETG HF @U1 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @U1 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @U1 0.4 nozzle", - "sub_path": "filament/Generic PETG HF @U1 0.4 nozzle.json" - }, - { - "name": "Generic PETG HF @U1 0.6 nozzle", - "sub_path": "filament/Generic PETG HF @U1 0.6 nozzle.json" - }, - { - "name": "Generic PETG HF @U1 0.8 nozzle", - "sub_path": "filament/Generic PETG HF @U1 0.8 nozzle.json" - }, - { - "name": "Generic PETG-CF @U1 0.4 nozzle", - "sub_path": "filament/Generic PETG-CF @U1 0.4 nozzle.json" - }, - { - "name": "Generic PETG-CF @U1 0.6 nozzle", - "sub_path": "filament/Generic PETG-CF @U1 0.6 nozzle.json" - }, - { - "name": "Generic PETG-CF @U1 0.8 nozzle", - "sub_path": "filament/Generic PETG-CF @U1 0.8 nozzle.json" - }, - { - "name": "Generic PLA @U1 0.2 nozzle", - "sub_path": "filament/Generic PLA @U1 0.2 nozzle.json" - }, - { - "name": "Generic PLA @U1 0.4 nozzle", - "sub_path": "filament/Generic PLA @U1 0.4 nozzle.json" - }, - { - "name": "Generic PLA @U1 0.6 nozzle", - "sub_path": "filament/Generic PLA @U1 0.6 nozzle.json" - }, - { - "name": "Generic PLA @U1 0.8 nozzle", - "sub_path": "filament/Generic PLA @U1 0.8 nozzle.json" - }, - { - "name": "Generic PLA High Speed @U1 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @U1 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @U1 0.4 nozzle", - "sub_path": "filament/Generic PLA High Speed @U1 0.4 nozzle.json" - }, - { - "name": "Generic PLA High Speed @U1 0.6 nozzle", - "sub_path": "filament/Generic PLA High Speed @U1 0.6 nozzle.json" - }, - { - "name": "Generic PLA High Speed @U1 0.8 nozzle", - "sub_path": "filament/Generic PLA High Speed @U1 0.8 nozzle.json" - }, - { - "name": "Generic PLA Silk @U1 0.2 nozzle", - "sub_path": "filament/Generic PLA Silk @U1 0.2 nozzle.json" - }, - { - "name": "Generic PLA Silk @U1 0.4 nozzle", - "sub_path": "filament/Generic PLA Silk @U1 0.4 nozzle.json" - }, - { - "name": "Generic PLA Silk @U1 0.6 nozzle", - "sub_path": "filament/Generic PLA Silk @U1 0.6 nozzle.json" - }, - { - "name": "Generic PLA Silk @U1 0.8 nozzle", - "sub_path": "filament/Generic PLA Silk @U1 0.8 nozzle.json" - }, - { - "name": "Generic PLA-CF @U1 0.4 nozzle", - "sub_path": "filament/Generic PLA-CF @U1 0.4 nozzle.json" - }, - { - "name": "Generic PLA-CF @U1 0.6 nozzle", - "sub_path": "filament/Generic PLA-CF @U1 0.6 nozzle.json" - }, - { - "name": "Generic PLA-CF @U1 0.8 nozzle", - "sub_path": "filament/Generic PLA-CF @U1 0.8 nozzle.json" - }, - { - "name": "Generic TPU @U1 0.4 nozzle", - "sub_path": "filament/Generic TPU @U1 0.4 nozzle.json" - }, - { - "name": "Generic TPU @U1 0.6 nozzle", - "sub_path": "filament/Generic TPU @U1 0.6 nozzle.json" - }, - { - "name": "Generic TPU @U1 0.8 nozzle", - "sub_path": "filament/Generic TPU @U1 0.8 nozzle.json" - }, { "name": "PolyTerra J1 PLA", "sub_path": "filament/Polymaker/PolyTerra J1 PLA.json" @@ -2358,22 +2238,6 @@ "name": "Snapmaker Artisan (0.8 nozzle)", "sub_path": "machine/Snapmaker Artisan (0.8 nozzle).json" }, - { - "name": "Snapmaker U1 (0.2 High Flow nozzle)", - "sub_path": "machine/Snapmaker U1 (0.2 High Flow nozzle).json" - }, - { - "name": "Snapmaker U1 (0.4 High Flow nozzle)", - "sub_path": "machine/Snapmaker U1 (0.4 High Flow nozzle).json" - }, - { - "name": "Snapmaker U1 (0.6 High Flow nozzle)", - "sub_path": "machine/Snapmaker U1 (0.6 High Flow nozzle).json" - }, - { - "name": "Snapmaker U1 (0.8 High Flow nozzle)", - "sub_path": "machine/Snapmaker U1 (0.8 High Flow nozzle).json" - }, { "name": "Snapmaker A250 Dual BKit (0.2 nozzle)", "sub_path": "machine/Snapmaker A250 Dual BKit (0.2 nozzle).json" diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json deleted file mode 100644 index f993f4bbf7..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG @U1 0.2 nozzle", - "renamed_from": "Generic PETG U1 0.2 nozzle;Generic PETG @U1 0.2 High Flow nozzle;Generic PETG U1 0.2 High Flow nozzle", - "inherits": "Generic PETG @System", - "from": "system", - "setting_id": "Iw7T4qqDf1fbSAa1", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "10", - "1" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json deleted file mode 100644 index 4a04d39f7f..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG @U1 0.4 nozzle", - "renamed_from": "Generic PETG U1 0.4 nozzle;Generic PETG @U1 0.4 High Flow nozzle;Generic PETG U1 0.4 High Flow nozzle", - "inherits": "Generic PETG @System", - "from": "system", - "setting_id": "VHRa4TXU7HPz7Fld", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "10", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json deleted file mode 100644 index e1d6d82c6d..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG @U1 0.6 nozzle", - "renamed_from": "Generic PETG U1 0.6 nozzle;Generic PETG @U1 0.6 High Flow nozzle;Generic PETG U1 0.6 High Flow nozzle", - "inherits": "Generic PETG @System", - "from": "system", - "setting_id": "Ubr8v7BTxiQMntVk", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "10", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json deleted file mode 100644 index 368f9f4beb..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG @U1 0.8 nozzle", - "renamed_from": "Generic PETG U1 0.8 nozzle;Generic PETG @U1 0.8 High Flow nozzle;Generic PETG U1 0.8 High Flow nozzle", - "inherits": "Generic PETG @System", - "from": "system", - "setting_id": "ro0mXCLzC5rY95oX", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "10", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json deleted file mode 100644 index 7ef983ddb7..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG HF @U1 0.2 nozzle", - "renamed_from": "Generic PETG HF U1 0.2 nozzle;Generic PETG HF @U1 0.2 High Flow nozzle;Generic PETG HF U1 0.2 High Flow nozzle", - "inherits": "Generic PETG HF @System", - "from": "system", - "setting_id": "7yjLWAdcQe4ndo1z", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "20", - "1" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json deleted file mode 100644 index 1818f8dc9d..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG HF @U1 0.4 nozzle", - "renamed_from": "Generic PETG HF U1 0.4 nozzle;Generic PETG HF @U1 0.4 High Flow nozzle;Generic PETG HF U1 0.4 High Flow nozzle", - "inherits": "Generic PETG HF @System", - "from": "system", - "setting_id": "XWWLYZWkD9ZNRPeO", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "20", - "16" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json deleted file mode 100644 index d2f3c0a3af..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG HF @U1 0.6 nozzle", - "renamed_from": "Generic PETG HF U1 0.6 nozzle;Generic PETG HF @U1 0.6 High Flow nozzle;Generic PETG HF U1 0.6 High Flow nozzle", - "inherits": "Generic PETG HF @System", - "from": "system", - "setting_id": "1dj4JdFabSql3cEg", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "20", - "16" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json deleted file mode 100644 index 80c670da92..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG HF @U1 0.8 nozzle", - "renamed_from": "Generic PETG HF U1 0.8 nozzle;Generic PETG HF @U1 0.8 High Flow nozzle;Generic PETG HF U1 0.8 High Flow nozzle", - "inherits": "Generic PETG HF @System", - "from": "system", - "setting_id": "1LYZ0KG5kQtaOOKt", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "20", - "16" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json deleted file mode 100644 index 16d2301a0a..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG-CF @U1 0.4 nozzle", - "renamed_from": "Generic PETG-CF U1 0.4 nozzle;Generic PETG-CF @U1 0.4 High Flow nozzle;Generic PETG-CF U1 0.4 High Flow nozzle", - "inherits": "Generic PETG-CF @System", - "from": "system", - "setting_id": "wIKcBM1qLgzLEUJP", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "11.5", - "11" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json deleted file mode 100644 index 9cb77c98fd..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG-CF @U1 0.6 nozzle", - "renamed_from": "Generic PETG-CF U1 0.6 nozzle;Generic PETG-CF @U1 0.6 High Flow nozzle;Generic PETG-CF U1 0.6 High Flow nozzle", - "inherits": "Generic PETG-CF @System", - "from": "system", - "setting_id": "FvrnBiPbjSvIF3kN", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json deleted file mode 100644 index a18aca19e4..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic PETG-CF @U1 0.8 nozzle", - "renamed_from": "Generic PETG-CF U1 0.8 nozzle;Generic PETG-CF @U1 0.8 High Flow nozzle;Generic PETG-CF U1 0.8 High Flow nozzle", - "inherits": "Generic PETG-CF @System", - "from": "system", - "setting_id": "SCfvzDgUWkFHmbtP", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json deleted file mode 100644 index 334be2020e..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA @U1 0.2 nozzle", - "renamed_from": "Generic PLA U1 0.2 nozzle;Generic PLA @U1 0.2 High Flow nozzle;Generic PLA U1 0.2 High Flow nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "8pb3tert1D4w0SKP", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "1.6" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json deleted file mode 100644 index 743800b360..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA @U1 0.4 nozzle", - "renamed_from": "Generic PLA U1 0.4 nozzle;Generic PLA @U1 0.4 High Flow nozzle;Generic PLA U1 0.4 High Flow nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "Uilm8oVmZzyxE3ba", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json deleted file mode 100644 index ba65c7f999..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA @U1 0.6 nozzle", - "renamed_from": "Generic PLA U1 0.6 nozzle;Generic PLA @U1 0.6 High Flow nozzle;Generic PLA U1 0.6 High Flow nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "aj4G9OSdgtQPqpkI", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json deleted file mode 100644 index 73c997dd6b..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA @U1 0.8 nozzle", - "renamed_from": "Generic PLA U1 0.8 nozzle;Generic PLA @U1 0.8 High Flow nozzle;Generic PLA U1 0.8 High Flow nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "zom29gBgIZmvjFmh", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json deleted file mode 100644 index fe3a8c5886..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA High Speed @U1 0.2 nozzle", - "renamed_from": "Generic PLA High Speed U1 0.2 nozzle;Generic PLA High Speed @U1 0.2 High Flow nozzle;Generic PLA High Speed U1 0.2 High Flow nozzle", - "inherits": "Generic PLA High Speed @System", - "from": "system", - "setting_id": "rT8e5f81vwUpwPuq", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "18", - "2" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json deleted file mode 100644 index 125a7a8f77..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA High Speed @U1 0.4 nozzle", - "renamed_from": "Generic PLA High Speed U1 0.4 nozzle;Generic PLA High Speed @U1 0.4 High Flow nozzle;Generic PLA High Speed U1 0.4 High Flow nozzle", - "inherits": "Generic PLA High Speed @System", - "from": "system", - "setting_id": "ZUetX0WveqW8fy6f", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json deleted file mode 100644 index 5a0c7f73cd..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA High Speed @U1 0.6 nozzle", - "renamed_from": "Generic PLA High Speed U1 0.6 nozzle;Generic PLA High Speed @U1 0.6 High Flow nozzle;Generic PLA High Speed U1 0.6 High Flow nozzle", - "inherits": "Generic PLA High Speed @System", - "from": "system", - "setting_id": "y2WY6qLA3xKZM1Mm", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json deleted file mode 100644 index 8826241929..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA High Speed @U1 0.8 nozzle", - "renamed_from": "Generic PLA High Speed U1 0.8 nozzle;Generic PLA High Speed @U1 0.8 High Flow nozzle;Generic PLA High Speed U1 0.8 High Flow nozzle", - "inherits": "Generic PLA High Speed @System", - "from": "system", - "setting_id": "VwXJrdwxvzjlIGal", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json deleted file mode 100644 index 4f8a43e43e..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA Silk @U1 0.2 nozzle", - "renamed_from": "Generic PLA Silk U1 0.2 nozzle;Generic PLA Silk @U1 0.2 High Flow nozzle;Generic PLA Silk U1 0.2 High Flow nozzle", - "inherits": "Generic PLA Silk @System", - "from": "system", - "setting_id": "381SJIDBre8HxHy2", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "7.5", - "2" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json deleted file mode 100644 index 36bb9d7b4e..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA Silk @U1 0.4 nozzle", - "renamed_from": "Generic PLA Silk U1 0.4 nozzle;Generic PLA Silk @U1 0.4 High Flow nozzle;Generic PLA Silk U1 0.4 High Flow nozzle", - "inherits": "Generic PLA Silk @System", - "from": "system", - "setting_id": "Fd1g9OdeM3pUx8f5", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json deleted file mode 100644 index 8981c44ce1..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA Silk @U1 0.6 nozzle", - "renamed_from": "Generic PLA Silk U1 0.6 nozzle;Generic PLA Silk @U1 0.6 High Flow nozzle;Generic PLA Silk U1 0.6 High Flow nozzle", - "inherits": "Generic PLA Silk @System", - "from": "system", - "setting_id": "8rhmpBFmMj9vVZwG", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json deleted file mode 100644 index ec2669e3ff..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA Silk @U1 0.8 nozzle", - "renamed_from": "Generic PLA Silk U1 0.8 nozzle;Generic PLA Silk @U1 0.8 High Flow nozzle;Generic PLA Silk U1 0.8 High Flow nozzle", - "inherits": "Generic PLA Silk @System", - "from": "system", - "setting_id": "Fo7U7GYHZh1aZPLs", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json deleted file mode 100644 index 2be327d2c2..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA-CF @U1 0.4 nozzle", - "renamed_from": "Generic PLA-CF U1 0.4 nozzle;Generic PLA-CF @U1 0.4 High Flow nozzle;Generic PLA-CF U1 0.4 High Flow nozzle", - "inherits": "Generic PLA-CF @System", - "from": "system", - "setting_id": "6AWubtDE4PqrKVNJ", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json deleted file mode 100644 index 24dd167796..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA-CF @U1 0.6 nozzle", - "renamed_from": "Generic PLA-CF U1 0.6 nozzle;Generic PLA-CF @U1 0.6 High Flow nozzle;Generic PLA-CF U1 0.6 High Flow nozzle", - "inherits": "Generic PLA-CF @System", - "from": "system", - "setting_id": "AvM44HgMCkOCnmzY", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json deleted file mode 100644 index f354ff4078..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 nozzle.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA-CF @U1 0.8 nozzle", - "renamed_from": "Generic PLA-CF U1 0.8 nozzle;Generic PLA-CF @U1 0.8 High Flow nozzle;Generic PLA-CF U1 0.8 High Flow nozzle", - "inherits": "Generic PLA-CF @System", - "from": "system", - "setting_id": "tvYAUvQEbbdBCIg2", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json deleted file mode 100644 index b840b579cd..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic TPU @U1 0.4 nozzle", - "renamed_from": "Generic TPU U1 0.4 nozzle;Generic TPU @U1 0.4 High Flow nozzle;Generic TPU U1 0.4 High Flow nozzle", - "inherits": "Generic TPU @System", - "from": "system", - "setting_id": "9d0jRdMgkPMahYL7", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json deleted file mode 100644 index de956528f3..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic TPU @U1 0.6 nozzle", - "renamed_from": "Generic TPU U1 0.6 nozzle;Generic TPU @U1 0.6 High Flow nozzle;Generic TPU U1 0.6 High Flow nozzle", - "inherits": "Generic TPU @System", - "from": "system", - "setting_id": "LLjEPSU4l09N3Zb8", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json deleted file mode 100644 index 4d1b48e333..0000000000 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 nozzle.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "Generic TPU @U1 0.8 nozzle", - "renamed_from": "Generic TPU U1 0.8 nozzle;Generic TPU @U1 0.8 High Flow nozzle;Generic TPU U1 0.8 High Flow nozzle", - "inherits": "Generic TPU @System", - "from": "system", - "setting_id": "Wfhd3jLEjSKzCeHE", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] -} diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json index 95d2564b31..0e743d7aee 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json @@ -1,29 +1,24 @@ { "type": "filament", "name": "Polymaker General PLA Family @U1", - "renamed_from": "Polymaker General PLA Family U1;Polymaker General PLA Family @U1 0.4 High Flow nozzle;Polymaker General PLA Family U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA @U1 base", "from": "system", "setting_id": "thXfSaUkOAKJ50ey", "filament_id": "OF44ERDr", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "enable_pressure_advance": [ - "0", "0" ], "filament_max_volumetric_speed": [ - "15", "15" ], "filament_vendor": [ "Polymaker" ], "nozzle_temperature_range_high": [ - "230", "230" ], "temperature_vitrification": [ @@ -34,12 +29,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json index 3f07a84bc2..990cc483f3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Polymaker Silk PLA Family @U1", - "renamed_from": "Polymaker Silk PLA Family U1;Polymaker Silk PLA Family @U1 0.4 High Flow nozzle;Polymaker Silk PLA Family U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA @U1 base", "from": "system", "setting_id": "h8vIYpXbxFtHPV6e", "filament_id": "OFH57ibH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_density": [ "1.34" @@ -18,15 +16,12 @@ "Polymaker" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "nozzle_temperature_range_high": [ - "230", "230" ], "textured_plate_temp": [ @@ -34,12 +29,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json index a7f2a911f7..1dad000fb2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json @@ -1,21 +1,18 @@ { "type": "filament", "name": "Polymaker Tough PLA Family @U1", - "renamed_from": "Polymaker Tough PLA Family U1;Polymaker Tough PLA Family @U1 0.4 High Flow nozzle;Polymaker Tough PLA Family U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA @U1 base", "from": "system", "setting_id": "d6CC81Es2hp46bto", "filament_id": "OFgdaBOt", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_density": [ "1.23" ], "filament_flow_ratio": [ - "0.96", "0.96" ], "filament_vendor": [ @@ -32,12 +29,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json index 7ac058b8d4..b38925e01b 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json @@ -1,28 +1,17 @@ { "type": "filament", "name": "Fiberon ASA-CF08 @Snapmaker U1", - "renamed_from": "Fiberon ASA-CF08 Snapmaker U1;Fiberon ASA-CF08 @U1 0.4 High Flow nozzle;Fiberon ASA-CF08 U1 0.4 High Flow nozzle", "inherits": "Fiberon ASA-CF08 @Snapmaker U1 base", "from": "system", "setting_id": "CdgDze2g0J4T7FEP", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "pressure_advance": [ - "0.05", "0.05" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon ASA-CF08 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json index 4a70c171d1..1bb569c291 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json @@ -1,40 +1,26 @@ { "type": "filament", "name": "Fiberon PA12-CF10 @Snapmaker U1", - "renamed_from": "Fiberon PA12-CF10 Snapmaker U1;Fiberon PA12-CF10 @U1 0.4 High Flow nozzle;Fiberon PA12-CF10 U1 0.4 High Flow nozzle", "inherits": "Fiberon PA12-CF10 @Snapmaker U1 base", "from": "system", "setting_id": "x3irDyMqwMgklHKg", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retraction_length": [ - "1.0", "1.0" ], "filament_z_hop": [ - "0.0", "0.0" ], "enable_pressure_advance": [ - "1", "1" ], "pressure_advance": [ - "0.05", "0.05" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA12-CF10 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json index cf1cf91a53..d6106faa50 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json @@ -1,40 +1,26 @@ { "type": "filament", "name": "Fiberon PA6-CF20 @Snapmaker U1", - "renamed_from": "Fiberon PA6-CF20 Snapmaker U1;Fiberon PA6-CF20 @U1 0.4 High Flow nozzle;Fiberon PA6-CF20 U1 0.4 High Flow nozzle", "inherits": "Fiberon PA6-CF20 @Snapmaker U1 base", "from": "system", "setting_id": "AMQyOXYNdWpVXmvK", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retraction_length": [ - "1.0", "1.0" ], "filament_z_hop": [ - "0.0", "0.0" ], "enable_pressure_advance": [ - "1", "1" ], "pressure_advance": [ - "0.08", "0.08" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA6-CF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json index 3260929361..660f4e9ef2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA612-ESD @Snapmaker U1.json @@ -1,37 +1,24 @@ { "type": "filament", "name": "Fiberon PA612-ESD @Snapmaker U1", - "renamed_from": "Fiberon PA612-ESD Snapmaker U1;Fiberon PA612-ESD @U1 0.4 High Flow nozzle;Fiberon PA612-ESD U1 0.4 High Flow nozzle", "inherits": "Fiberon PA612-ESD @Snapmaker U1 base", "from": "system", "setting_id": "hUvnA3XmuC3bGLsi", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retraction_length": [ - "1.0", "1.0" ], "filament_z_hop": [ - "0.0", "0.0" ], "description": " ", "enable_pressure_advance": [ - "1", "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA612-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json index 2111620245..6e1797904c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json @@ -1,17 +1,14 @@ { "type": "filament", "name": "Fiberon PETG-ESD @Snapmaker U1", - "renamed_from": "Fiberon PETG-ESD Snapmaker U1;Fiberon PETG-ESD @U1 0.4 High Flow nozzle;Fiberon PETG-ESD U1 0.4 High Flow nozzle", "inherits": "Fiberon PETG-ESD @Snapmaker U1 base", "from": "system", "setting_id": "AUr4Bm6UMW8S9TBh", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "supertack_plate_temp": [ @@ -21,14 +18,6 @@ "70" ], "pressure_advance": [ - "0.04", "0.04" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Fiberon PETG-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json index 2922f5c35e..4f1a9fdc10 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PPS-GF20 @Snapmaker U1.json @@ -1,25 +1,15 @@ { "type": "filament", "name": "Fiberon PPS-GF20 @Snapmaker U1", - "renamed_from": "Fiberon PPS-GF20 Snapmaker U1;Fiberon PPS-GF20 @U1 0.4 High Flow nozzle;Fiberon PPS-GF20 U1 0.4 High Flow nozzle", "inherits": "Fiberon PPS-GF20 @Snapmaker U1 base", "from": "system", "setting_id": "7IpyPFHEAOmFlINJ", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], - "description": " ", - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PPS-GF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ] + "description": " " } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json index e7dac937ee..1ad0f0d820 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma CoPE @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma CoPE @Snapmaker U1", - "renamed_from": "Panchroma CoPE @U1;Panchroma CoPE @U1 0.4 High Flow nozzle;Panchroma CoPE U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma CoPE @U1", "inherits": "Panchroma CoPE @Snapmaker U1 base", "from": "system", "setting_id": "gI7fRuITm0XhElnG", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma CoPE @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json index 73c689fc17..dcd84aeba9 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA @Snapmaker U1.json @@ -1,28 +1,18 @@ { "type": "filament", "name": "Panchroma PLA @Snapmaker U1", - "renamed_from": "Panchroma PLA @U1;Panchroma PLA @U1 0.4 High Flow nozzle;Panchroma PLA U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA @U1", "inherits": "Panchroma PLA @Snapmaker U1 base", "from": "system", "setting_id": "ayBhax9ELaiKfGFt", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_wipe": [ - "0", "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json index 1a13f95e37..561c748be3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Celestial @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Celestial @Snapmaker U1", - "renamed_from": "Panchroma PLA Celestial @U1;Panchroma PLA Celestial @U1 0.4 High Flow nozzle;Panchroma PLA Celestial U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Celestial @U1", "inherits": "Panchroma PLA Celestial @Snapmaker U1 base", "from": "system", "setting_id": "OVmWNHpQnLZ67Bxd", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Celestial @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json index 7472cb0a0a..fee27dc997 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Galaxy @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @Snapmaker U1", - "renamed_from": "Panchroma PLA Galaxy @U1;Panchroma PLA Galaxy @U1 0.4 High Flow nozzle;Panchroma PLA Galaxy U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Galaxy @U1", "inherits": "Panchroma PLA Galaxy @Snapmaker U1 base", "from": "system", "setting_id": "FLECN8LIZ5RLgQGi", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json index f39b67101a..2f1135de61 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Glow @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Glow @Snapmaker U1", - "renamed_from": "Panchroma PLA Glow @U1;Panchroma PLA Glow @U1 0.4 High Flow nozzle;Panchroma PLA Glow U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Glow @U1", "inherits": "Panchroma PLA Glow @Snapmaker U1 base", "from": "system", "setting_id": "YEf4HFNPNtoFoLJd", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json index c68daed901..fd701bf8c3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Luminous @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Luminous @Snapmaker U1", - "renamed_from": "Panchroma PLA Luminous @U1;Panchroma PLA Luminous @U1 0.4 High Flow nozzle;Panchroma PLA Luminous U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Luminous @U1", "inherits": "Panchroma PLA Luminous @Snapmaker U1 base", "from": "system", "setting_id": "bxbXVqsMWWNfWcAn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json index a1e846c551..2a1dbab936 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Marble @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Marble @Snapmaker U1", - "renamed_from": "Panchroma PLA Marble @U1;Panchroma PLA Marble @U1 0.4 High Flow nozzle;Panchroma PLA Marble U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Marble @U1", "inherits": "Panchroma PLA Marble @Snapmaker U1 base", "from": "system", "setting_id": "P9wE2kZSR2Coq1K7", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json index a6df908ab7..7652606816 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Matte @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Matte @Snapmaker U1", - "renamed_from": "Panchroma PLA Matte @U1;Panchroma PLA Matte @U1 0.4 High Flow nozzle;Panchroma PLA Matte U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Matte @U1", "inherits": "Panchroma PLA Matte @Snapmaker U1 base", "from": "system", "setting_id": "0oJUzBq7iYJgJxZ7", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Matte @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json index 5cefb4ed7f..fe8e68081c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Metallic @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Metallic @Snapmaker U1", - "renamed_from": "Panchroma PLA Metallic @U1;Panchroma PLA Metallic @U1 0.4 High Flow nozzle;Panchroma PLA Metallic U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Metallic @U1", "inherits": "Panchroma PLA Metallic @Snapmaker U1 base", "from": "system", "setting_id": "pAQGZzMH04kst11B", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json index b042855daf..cf16cb95c9 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Neon @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Neon @Snapmaker U1", - "renamed_from": "Panchroma PLA Neon @U1;Panchroma PLA Neon @U1 0.4 High Flow nozzle;Panchroma PLA Neon U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Neon @U1", "inherits": "Panchroma PLA Neon @Snapmaker U1 base", "from": "system", "setting_id": "qVG9q2ci7Cj4pM5c", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json index 8f920e7b9c..eff77a2aa9 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Satin @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Satin @Snapmaker U1", - "renamed_from": "Panchroma PLA Satin @U1;Panchroma PLA Satin @U1 0.4 High Flow nozzle;Panchroma PLA Satin U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Satin @U1", "inherits": "Panchroma PLA Satin @Snapmaker U1 base", "from": "system", "setting_id": "EHMn3LsbZlfuR7hD", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Satin @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json index e8ed450506..1020a48f0a 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Silk @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Silk @Snapmaker U1", - "renamed_from": "Panchroma PLA Silk @U1;Panchroma PLA Silk @U1 0.4 High Flow nozzle;Panchroma PLA Silk U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Silk @U1", "inherits": "Panchroma PLA Silk @Snapmaker U1 base", "from": "system", "setting_id": "JfIg6ZkVFA0CKLFI", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Panchroma PLA Silk @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json index 901a6ce47f..114391b517 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Starlight @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Starlight @Snapmaker U1", - "renamed_from": "Panchroma PLA Starlight @U1;Panchroma PLA Starlight @U1 0.4 High Flow nozzle;Panchroma PLA Starlight U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Starlight @U1", "inherits": "Panchroma PLA Starlight @Snapmaker U1 base", "from": "system", "setting_id": "pgcdQlQmPFSaduVr", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json index eaf3d61871..ca50194577 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Temp Shift @Snapmaker U1.json @@ -1,23 +1,27 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @Snapmaker U1", - "renamed_from": "Panchroma PLA Temp Shift @U1;Panchroma PLA Temp Shift @U1 0.4 High Flow nozzle;Panchroma PLA Temp Shift U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Temp Shift @U1", "inherits": "Panchroma PLA Temp Shift @Snapmaker U1 base", "from": "system", "setting_id": "SJq26RGx7OoZB4uH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" ], "slow_down_layer_time": [ "4" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Temp Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json index d361fefb66..cff9ec2011 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA Translucent @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA Translucent @Snapmaker U1", - "renamed_from": "Panchroma PLA Translucent @U1;Panchroma PLA Translucent @U1 0.4 High Flow nozzle;Panchroma PLA Translucent U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA Translucent @U1", "inherits": "Panchroma PLA Translucent @Snapmaker U1 base", "from": "system", "setting_id": "CBt541HVuOa7GGb9", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json index a02175965e..1d4a6a0bbe 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Panchroma PLA UV Shift @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @Snapmaker U1", - "renamed_from": "Panchroma PLA UV Shift @U1;Panchroma PLA UV Shift @U1 0.4 High Flow nozzle;Panchroma PLA UV Shift U1 0.4 High Flow nozzle", + "renamed_from": "Panchroma PLA UV Shift @U1", "inherits": "Panchroma PLA UV Shift @Snapmaker U1 base", "from": "system", "setting_id": "vfVlN8IokcNnixsV", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA UV Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json index 99871fd7cc..836723cf7a 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite CosPLA @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite CosPLA @Snapmaker U1", - "renamed_from": "PolyLite CosPLA Snapmaker U1;PolyLite CosPLA @U1 0.4 High Flow nozzle;PolyLite CosPLA U1 0.4 High Flow nozzle", "inherits": "PolyLite CosPLA @Snapmaker U1 base", "from": "system", "setting_id": "KwD7WDyJNa4hWfZ8", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite CosPLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json index e1452a28d6..f51cc5eeec 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json @@ -1,17 +1,14 @@ { "type": "filament", "name": "PolyLite PETG @Snapmaker U1", - "renamed_from": "PolyLite PETG Snapmaker U1;PolyLite PETG @U1 0.4 High Flow nozzle;PolyLite PETG U1 0.4 High Flow nozzle", "inherits": "PolyLite PETG @Snapmaker U1 base", "from": "system", "setting_id": "U9U4YmaRxgIdxQOc", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "supertack_plate_temp": [ @@ -21,14 +18,6 @@ "70" ], "pressure_advance": [ - "0.05", "0.05" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json index 135c13d405..a3efeee371 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json @@ -1,17 +1,14 @@ { "type": "filament", "name": "PolyLite PETG Translucent @Snapmaker U1", - "renamed_from": "PolyLite PETG Translucent Snapmaker U1;PolyLite PETG Translucent @U1 0.4 High Flow nozzle;PolyLite PETG Translucent U1 0.4 High Flow nozzle", "inherits": "PolyLite PETG Translucent @Snapmaker U1 base", "from": "system", "setting_id": "NBQOZiQQ8MpcDnLM", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "supertack_plate_temp": [ @@ -21,14 +18,6 @@ "70" ], "pressure_advance": [ - "0.05", "0.05" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json index 12b39b237b..715d8060e4 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "PolyLite PLA @Snapmaker U1", - "renamed_from": "PolyLite PLA @U1;PolyLite PLA @U1 0.4 High Flow nozzle;PolyLite PLA U1 0.4 High Flow nozzle", + "renamed_from": "PolyLite PLA @U1", "inherits": "PolyLite PLA @Snapmaker U1 base", "from": "system", "setting_id": "RtK3uYFG0OKtnLkP", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json index f869eb42f5..e096b1b9b3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Galaxy @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Galaxy @Snapmaker U1", - "renamed_from": "PolyLite PLA Galaxy Snapmaker U1;PolyLite PLA Galaxy @U1 0.4 High Flow nozzle;PolyLite PLA Galaxy U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Galaxy @Snapmaker U1 base", "from": "system", "setting_id": "mNMTe346QAgo61NH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json index 8969ef20f9..a36d2b9de5 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Glow @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Glow @Snapmaker U1", - "renamed_from": "PolyLite PLA Glow Snapmaker U1;PolyLite PLA Glow @U1 0.4 High Flow nozzle;PolyLite PLA Glow U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Glow @Snapmaker U1 base", "from": "system", "setting_id": "xYjGzOzWWE2PBfNd", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json index 838a7e9b0d..874004e6ea 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Luminous @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Luminous @Snapmaker U1", - "renamed_from": "PolyLite PLA Luminous Snapmaker U1;PolyLite PLA Luminous @U1 0.4 High Flow nozzle;PolyLite PLA Luminous U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Luminous @Snapmaker U1 base", "from": "system", "setting_id": "pcPG6yUSO8F0e4gM", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json index e2c90ba3df..fbbb2a4585 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Neon @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Neon @Snapmaker U1", - "renamed_from": "PolyLite PLA Neon Snapmaker U1;PolyLite PLA Neon @U1 0.4 High Flow nozzle;PolyLite PLA Neon U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Neon @Snapmaker U1 base", "from": "system", "setting_id": "WMoh0mKVmVsdP5rc", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json index ac90bd96e1..47163a788c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro @Snapmaker U1.json @@ -1,23 +1,27 @@ { "type": "filament", "name": "PolyLite PLA Pro @Snapmaker U1", - "renamed_from": "PolyLite PLA Pro @U1;PolyLite PLA Pro @U1 0.4 High Flow nozzle;PolyLite PLA Pro U1 0.4 High Flow nozzle", + "renamed_from": "PolyLite PLA Pro @U1", "inherits": "PolyLite PLA Pro @Snapmaker U1 base", "from": "system", "setting_id": "GxuEzTdHffrvh2q6", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" ], "slow_down_layer_time": [ "4" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json index e7747546cc..b1611b961d 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Pro Metallic @Snapmaker U1.json @@ -1,20 +1,17 @@ { "type": "filament", "name": "PolyLite PLA Pro Metallic @Snapmaker U1", - "renamed_from": "PolyLite PLA Pro Metallic Snapmaker U1;PolyLite PLA Pro Metallic @U1 0.4 High Flow nozzle;PolyLite PLA Pro Metallic U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Pro Metallic @Snapmaker U1 base", "from": "system", "setting_id": "21wjCLo6hOb9p38K", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_end_gcode": [ "; filament end gcode \n\n" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_start_gcode": [ @@ -28,14 +25,6 @@ "0" ], "enable_pressure_advance": [ - "0", "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json index e8e917c77d..56108cfed2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Starlight @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Starlight @Snapmaker U1", - "renamed_from": "PolyLite PLA Starlight Snapmaker U1;PolyLite PLA Starlight @U1 0.4 High Flow nozzle;PolyLite PLA Starlight U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Starlight @Snapmaker U1 base", "from": "system", "setting_id": "geXEuSvWTJD0rK7F", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json index c72f88974a..799e272fab 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA Translucent @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyLite PLA Translucent @Snapmaker U1", - "renamed_from": "PolyLite PLA Translucent Snapmaker U1;PolyLite PLA Translucent @U1 0.4 High Flow nozzle;PolyLite PLA Translucent U1 0.4 High Flow nozzle", "inherits": "PolyLite PLA Translucent @Snapmaker U1 base", "from": "system", "setting_id": "YpMLpguxd61Bs16O", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json index 860fd28cc4..244cf91471 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "PolyTerra PLA @Snapmaker U1", - "renamed_from": "PolyTerra PLA @U1;PolyTerra PLA @U1 0.4 High Flow nozzle;PolyTerra PLA U1 0.4 High Flow nozzle", + "renamed_from": "PolyTerra PLA @U1", "inherits": "PolyTerra PLA @Snapmaker U1 base", "from": "system", "setting_id": "kyxayLqRGrKKBwqp", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json index 85d38d728b..19e419ca36 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA Marble @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyTerra PLA Marble @Snapmaker U1", - "renamed_from": "PolyTerra PLA Marble Snapmaker U1;PolyTerra PLA Marble @U1 0.4 High Flow nozzle;PolyTerra PLA Marble U1 0.4 High Flow nozzle", "inherits": "PolyTerra PLA Marble @Snapmaker U1 base", "from": "system", "setting_id": "VjVt04nDFS9l9Rl9", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json index 251549352a..c3dd9d5537 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA+ @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "PolyTerra PLA+ @Snapmaker U1", - "renamed_from": "PolyTerra PLA+ Snapmaker U1;PolyTerra PLA+ @U1 0.4 High Flow nozzle;PolyTerra PLA+ U1 0.4 High Flow nozzle", "inherits": "PolyTerra PLA+ @Snapmaker U1 base", "from": "system", "setting_id": "5L213op8PhcYpqiF", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA+ @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json index 085e76dd37..ef631e550b 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Polymaker HT-PLA @Snapmaker U1", - "renamed_from": "Polymaker HT-PLA @U1;Polymaker HT-PLA @U1 0.4 High Flow nozzle;Polymaker HT-PLA U1 0.4 High Flow nozzle", + "renamed_from": "Polymaker HT-PLA @U1", "inherits": "Polymaker HT-PLA @Snapmaker U1 base", "from": "system", "setting_id": "0A5ETOrUTF0P3HS4", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json index 663f56a179..ac49e4f7ac 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Snapmaker U1.json @@ -1,24 +1,15 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @Snapmaker U1", - "renamed_from": "Polymaker HT-PLA-GF @U1;Polymaker HT-PLA-GF @U1 0.4 High Flow nozzle;Polymaker HT-PLA-GF U1 0.4 High Flow nozzle", + "renamed_from": "Polymaker HT-PLA-GF @U1", "inherits": "Polymaker HT-PLA-GF @Snapmaker U1 base", "from": "system", "setting_id": "i0LA17aaWvgLG7xd", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA-GF @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json index bfd9836810..a3e11c2cd2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Snapmaker U1.json @@ -1,17 +1,14 @@ { "type": "filament", "name": "Polymaker PETG @Snapmaker U1", - "renamed_from": "Polymaker PETG Snapmaker U1;Polymaker PETG @U1 0.4 High Flow nozzle;Polymaker PETG U1 0.4 High Flow nozzle", "inherits": "Polymaker PETG @Snapmaker U1 base", "from": "system", "setting_id": "kS4t66kFCXtambwx", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "supertack_plate_temp": [ @@ -19,12 +16,5 @@ ], "supertack_plate_temp_initial_layer": [ "70" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json index fc8917d773..ecac971c5e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG Galaxy @Snapmaker U1.json @@ -1,17 +1,14 @@ { "type": "filament", "name": "Polymaker PETG Galaxy @Snapmaker U1", - "renamed_from": "Polymaker PETG Galaxy Snapmaker U1;Polymaker PETG Galaxy @U1 0.4 High Flow nozzle;Polymaker PETG Galaxy U1 0.4 High Flow nozzle", "inherits": "Polymaker PETG Galaxy @Snapmaker U1 base", "from": "system", "setting_id": "a5yZ1QlqIGEAW1sU", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "supertack_plate_temp": [ @@ -19,12 +16,5 @@ ], "supertack_plate_temp_initial_layer": [ "70" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json index 077a259687..ff614bc79f 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA @Snapmaker U1.json @@ -1,28 +1,20 @@ { "type": "filament", "name": "Polymaker PLA @Snapmaker U1", - "renamed_from": "Polymaker PLA Snapmaker U1;Polymaker PLA @U1 0.4 High Flow nozzle;Polymaker PLA U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA @Snapmaker U1 base", "from": "system", "setting_id": "NSuD5f5eVr8SHA4n", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive Standard" ], "pressure_advance": [ - "0.05", "0.05" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Polymaker PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json index e9a11b4989..d5823b53a6 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "Polymaker PLA Pro @Snapmaker U1", - "renamed_from": "Polymaker PLA Pro Snapmaker U1;Polymaker PLA Pro @U1 0.4 High Flow nozzle;Polymaker PLA Pro U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA Pro @Snapmaker U1 base", "from": "system", "setting_id": "0iJ5qjVvmrkRzpZD", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json index a1a75b337a..a26fb437e7 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro Metallic @Snapmaker U1.json @@ -1,24 +1,14 @@ { "type": "filament", "name": "Polymaker PLA Pro Metallic @Snapmaker U1", - "renamed_from": "Polymaker PLA Pro Metallic Snapmaker U1;Polymaker PLA Pro Metallic @U1 0.4 High Flow nozzle;Polymaker PLA Pro Metallic U1 0.4 High Flow nozzle", "inherits": "Polymaker PLA Pro Metallic @Snapmaker U1 base", "from": "system", "setting_id": "s4F24JmyDykNvtAV", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json index a9137c0b4a..fe6c59ba80 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json @@ -1,72 +1,14 @@ { "type": "filament", "name": "Snapmaker ABS @U1", - "renamed_from": "Snapmaker ABS U1;Snapmaker ABS @U1 0.4 High Flow nozzle;Snapmaker ABS U1 0.4 High Flow nozzle", "inherits": "Snapmaker ABS @U1 base", "from": "system", "setting_id": "UFMRgwmOOQhOa3kB", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_retract_length_toolchange": [ - "5", "5" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_minimal_purge_on_wipe_tower": [ - "0", - "15" - ], - "fan_max_speed": [ - "15", - "60" - ], - "nozzle_temperature_initial_layer": [ - "260", - "280" - ], - "nozzle_temperature": [ - "260", - "280" - ], - "filament_multitool_ramming_volume": [ - "0", - "5" - ], - "additional_cooling_fan_speed": [ - "0", - "0" - ], - "filament_retraction_length": [ - "0.6", - "0.2" - ], - "filament_max_volumetric_speed": [ - "8", - "22" - ], - "filament_multitool_ramming_flow": [ - "10", - "30" - ], - "fan_min_speed": [ - "15", - "10" - ], - "filament_z_hop_types": [ - "nil", - "Slope Lift" - ], - "filament_multitool_ramming": [ - "0", - "1" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json index 8e2a71a0a7..1ba6c22c9a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS Benchy @U1.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Snapmaker ABS Benchy @U1", - "renamed_from": "Snapmaker ABS Benchy U1;Snapmaker ABS Benchy @U1 0.4 High Flow nozzle;Snapmaker ABS Benchy U1 0.4 High Flow nozzle", "inherits": "Snapmaker ABS @U1 base", "from": "system", "setting_id": "xszx4XRGrp88OdP8", "filament_id": "OFJrvXth", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "compatible_prints": [ "0.25 Benchy @Snapmaker U1 (0.4 nozzle)" @@ -24,43 +22,33 @@ "2" ], "filament_deretraction_speed": [ - "55", "55" ], "filament_max_volumetric_speed": [ - "31", "31" ], "filament_retract_when_changing_layer": [ - "0", "0" ], "filament_retraction_length": [ - "0.5", "0.5" ], "filament_z_hop": [ - "0", "0" ], "filament_retraction_speed": [ - "55", "55" ], "filament_wipe": [ - "0", "0" ], "nozzle_temperature": [ - "250", "250" ], "fan_max_speed": [ - "50", "50" ], "fan_min_speed": [ - "35", "35" ], "slow_down_min_speed": [ @@ -71,12 +59,5 @@ ], "default_filament_colour": [ "" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: eSUN ABS+\nSunlu ABS+\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 31 mm^3/s, from local standard fallback preset Snapmaker ABS Benchy @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json index 2911df67e8..67bde29e8d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json @@ -1,72 +1,14 @@ { "type": "filament", "name": "Snapmaker ASA @U1", - "renamed_from": "Snapmaker ASA U1;Snapmaker ASA @U1 0.4 High Flow nozzle;Snapmaker ASA U1 0.4 High Flow nozzle", "inherits": "Snapmaker ASA @U1 base", "from": "system", "setting_id": "XlbCMKY8EvV0vM88", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_retract_length_toolchange": [ - "5", "5" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_minimal_purge_on_wipe_tower": [ - "0", - "15" - ], - "fan_max_speed": [ - "15", - "25" - ], - "nozzle_temperature_initial_layer": [ - "255", - "280" - ], - "nozzle_temperature": [ - "255", - "280" - ], - "filament_multitool_ramming_volume": [ - "0", - "10" - ], - "additional_cooling_fan_speed": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "8", - "22" - ], - "pressure_advance": [ - "0.04", - "0.02" - ], - "filament_multitool_ramming_flow": [ - "10", - "20" - ], - "fan_min_speed": [ - "0", - "10" - ], - "filament_z_hop_types": [ - "nil", - "Slope Lift" - ], - "filament_multitool_ramming": [ - "0", - "1" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json index 8baf211010..19dc66df4e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json @@ -1,40 +1,36 @@ { "type": "filament", "name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", - "renamed_from": "Snapmaker Breakaway Support For PLA U1 0.2 nozzle;Snapmaker Breakaway Support For PLA @U1 0.2 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.2 High Flow nozzle", "inherits": "Snapmaker Breakaway Support @base", "from": "system", "setting_id": "mJoaud6wulT4p8SA", "filament_id": "OFnmp2pO", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "filament_type": [ "PLA" ], + "enable_pressure_advance": [ + "0" + ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_max_speed": [ - "30", "30" ], "fan_min_speed": [ - "20", "20" ], "filament_cost": [ @@ -44,46 +40,36 @@ "1.3" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1", "1" ], "filament_max_volumetric_speed": [ - "0.5", "0.5" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ - "240", "240" ], "nozzle_temperature_initial_layer": [ - "240", "240" ], "nozzle_temperature_range_low": [ - "190", "190" ], "pressure_advance": [ - "0.2", "0.2" ], "textured_plate_temp": [ @@ -99,19 +85,15 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_unloading_speed": [ @@ -119,12 +101,5 @@ ], "filament_unloading_speed_start": [ "100" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 0.5 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.2 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json index ad4321da3f..6f800f7b98 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json @@ -1,19 +1,20 @@ { "type": "filament", "name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", - "renamed_from": "Snapmaker Breakaway Support For PLA U1 0.6 nozzle;Snapmaker Breakaway Support For PLA @U1 0.6 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.6 High Flow nozzle", "inherits": "Snapmaker Breakaway Support @base", "from": "system", "setting_id": "rKUUREJNhstIU0I2", "filament_id": "OFnmp2pO", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filament_type": [ "PLA" ], + "enable_pressure_advance": [ + "0" + ], "filament_cost": [ "69.98" ], @@ -21,26 +22,21 @@ "1.3" ], "filament_flow_ratio": [ - "0.95", "0.95" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ - "210", "210" ], "nozzle_temperature_initial_layer": [ - "210", "210" ], "nozzle_temperature_range_low": [ - "190", "190" ], "pressure_advance": [ - "0.02", "0.02" ], "textured_plate_temp": [ @@ -50,46 +46,36 @@ "65" ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_min_speed": [ - "100", "100" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "1", "1" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_wipe_distance": [ - "2", "2" ], "filament_cooling_moves": [ @@ -99,19 +85,15 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_unloading_speed": [ @@ -119,12 +101,5 @@ ], "filament_unloading_speed_start": [ "100" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.6 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json index 3e2fdc633a..c7a2b01351 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json @@ -1,32 +1,30 @@ { "type": "filament", "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", - "renamed_from": "Snapmaker Breakaway Support For PLA U1 0.8 nozzle;Snapmaker Breakaway Support For PLA @U1 0.8 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.8 High Flow nozzle", "inherits": "Snapmaker Breakaway Support @base", "from": "system", "setting_id": "hQ8jQ5GKQKGKuPew", "filament_id": "OFnmp2pO", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_type": [ "PLA" ], + "enable_pressure_advance": [ + "0" + ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ @@ -36,42 +34,33 @@ "1.3" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "0.93", "0.93" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "3", "3" ], "filament_retraction_speed": [ - "nil", "nil" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ - "210", "210" ], "nozzle_temperature_initial_layer": [ - "210", "210" ], "nozzle_temperature_range_low": [ - "190", "190" ], "pressure_advance": [ - "0.015", "0.015" ], "textured_plate_temp_initial_layer": [ @@ -84,19 +73,15 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_unloading_speed": [ @@ -106,17 +91,9 @@ "100" ], "fan_min_speed": [ - "100", "100" ], "textured_plate_temp": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.8 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json index 877e005324..eff74ae5ab 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json @@ -1,82 +1,66 @@ { "type": "filament", "name": "Snapmaker Breakaway Support For PLA @U1", - "renamed_from": "Snapmaker Breakaway Support For PLA U1;Snapmaker Breakaway Support For PLA @U1 0.4 High Flow nozzle;Snapmaker Breakaway Support For PLA U1 0.4 High Flow nozzle", "inherits": "Snapmaker Breakaway Support @base", "from": "system", "setting_id": "5DqT3CYUgp1oJD1V", "filament_id": "OFnmp2pO", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_type": [ "PLA" ], "enable_pressure_advance": [ - "1", "1" ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_min_speed": [ - "100", "100" ], "filament_cooling_moves": [ "4" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1", "1" ], "filament_loading_speed": [ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "20", "20" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_unloading_speed": [ @@ -89,19 +73,15 @@ "65" ], "nozzle_temperature": [ - "210", "210" ], "nozzle_temperature_initial_layer": [ - "210", "210" ], "nozzle_temperature_range_low": [ - "190", "190" ], "pressure_advance": [ - "0.03", "0.03" ], "textured_plate_temp": [ @@ -109,16 +89,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker Support For PLA @U1 0.4 nozzle. Its base identifies the material as Snapmaker Breakaway Support. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "12", - "18" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json index f2297d56cf..b2dc562d3b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1.json @@ -1,20 +1,11 @@ { "type": "filament", "name": "Snapmaker PA-CF @U1", - "renamed_from": "Snapmaker PA-CF U1;Snapmaker PA-CF @U1 0.4 High Flow nozzle;Snapmaker PA-CF U1 0.4 High Flow nozzle", "inherits": "Snapmaker PA-CF @U1 base", "from": "system", "setting_id": "8aP6ye4aeOS7qKpG", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Snapmaker PA-CF @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json index 10723ae4d1..e4dd0d2035 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1.json @@ -1,20 +1,11 @@ { "type": "filament", "name": "Snapmaker PET @U1", - "renamed_from": "Snapmaker PET U1;Snapmaker PET @U1 0.4 High Flow nozzle;Snapmaker PET U1 0.4 High Flow nozzle", "inherits": "Snapmaker PET @U1 base", "from": "system", "setting_id": "sIijFVd50jJB1sK0", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: JiaNong PET 1.63x1.75mm\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 6.8 mm^3/s, from local standard fallback preset Snapmaker PET @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json index 6a80696224..5df9952064 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1.json @@ -1,20 +1,11 @@ { "type": "filament", "name": "Snapmaker PETG @U1", - "renamed_from": "Snapmaker PETG U1;Snapmaker PETG @U1 0.4 High Flow nozzle;Snapmaker PETG U1 0.4 High Flow nozzle", "inherits": "Snapmaker PETG @U1 base", "from": "system", "setting_id": "r7KJB0EPpsknK5iH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10 mm^3/s, from local standard fallback preset Snapmaker PETG @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json index 6609f2a381..9d9e3918cf 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -1,25 +1,29 @@ { "type": "filament", "name": "Snapmaker PETG HF @U1 0.2 nozzle", - "renamed_from": "Snapmaker PETG HF U1 0.2 nozzle;Snapmaker PETG HF @U1 0.2 High Flow nozzle;Snapmaker PETG HF U1 0.2 High Flow nozzle", "inherits": "Snapmaker PETG HF @U1 base2", "from": "system", "setting_id": "Ujul2YTBwfldFiFd", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive Standard" ], "filament_max_volumetric_speed": [ - "1", - "2" + "1" + ], + "filament_ramming_travel_time": [ + "0" + ], + "long_retractions_when_ec": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" ], "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "additional_cooling_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -32,34 +36,27 @@ "20" ], "fan_max_speed": [ - "60", "60" ], "fan_min_speed": [ - "30", "30" ], "filament_end_gcode": [ "\n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "3", "3" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1.5", "1.5" ], "filament_start_gcode": [ @@ -75,15 +72,12 @@ "80" ], "nozzle_temperature": [ - "245", "245" ], "nozzle_temperature_initial_layer": [ - "245", - "230" + "245" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_speed": [ @@ -108,18 +102,6 @@ "80" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "pressure_advance": [ - "0.03", - "0.0525" - ], - "filament_flow_ratio": [ - "0.95", - "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json deleted file mode 100644 index 6489aeaf67..0000000000 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 nozzle.json +++ /dev/null @@ -1,92 +0,0 @@ -{ - "type": "filament", - "name": "Snapmaker PETG HF @U1 0.4 nozzle", - "renamed_from": "Snapmaker PETG HF U1 0.4 nozzle;Snapmaker PETG HF @U1 0.4 High Flow nozzle;Snapmaker PETG HF U1 0.4 High Flow nozzle", - "inherits": "Snapmaker PETG HF @U1 base2", - "from": "system", - "setting_id": "9NnYt52azW8zCp4a", - "instantiation": "true", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_minimal_purge_on_wipe_tower": [ - "15", - "50" - ], - "nozzle_temperature_range_low": [ - "220", - "230" - ], - "fan_max_speed": [ - "40", - "60" - ], - "nozzle_temperature_initial_layer": [ - "220", - "230" - ], - "nozzle_temperature": [ - "220", - "245" - ], - "filament_multitool_ramming_volume": [ - "0", - "8" - ], - "filament_retraction_length": [ - "nil", - "0.8" - ], - "filament_wipe_distance": [ - "nil", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "30" - ], - "filament_retract_length_toolchange": [ - "nil", - "8" - ], - "pressure_advance": [ - "0.03", - "0.035" - ], - "filament_deretraction_speed": [ - "nil", - "40" - ], - "filament_multitool_ramming_flow": [ - "10", - "30" - ], - "fan_min_speed": [ - "20", - "30" - ], - "filament_flow_ratio": [ - "0.95", - "0.955" - ], - "filament_z_hop_types": [ - "nil", - "Slope Lift" - ], - "filament_multitool_ramming": [ - "0", - "1" - ], - "filament_retraction_speed": [ - "nil", - "40" - ] -} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json index 9a30b59d07..985505a027 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -1,21 +1,26 @@ { "type": "filament", "name": "Snapmaker PETG HF @U1 0.6 nozzle", - "renamed_from": "Snapmaker PETG HF U1 0.6 nozzle;Snapmaker PETG HF @U1 0.6 High Flow nozzle;Snapmaker PETG HF U1 0.6 High Flow nozzle", "inherits": "Snapmaker PETG HF @U1 base2", "from": "system", "setting_id": "2FfQZdp5xunngnF0", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive Standard" + ], + "filament_ramming_travel_time": [ + "0" + ], + "long_retractions_when_ec": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" ], "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "additional_cooling_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -28,38 +33,30 @@ "20" ], "fan_max_speed": [ - "60", "60" ], "fan_min_speed": [ - "30", "30" ], "filament_end_gcode": [ "\n" ], "filament_max_volumetric_speed": [ - "20", "20" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "2.5", "2.5" ], "filament_start_gcode": [ @@ -69,15 +66,12 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "1", "1" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -87,15 +81,12 @@ "80" ], "nozzle_temperature": [ - "245", "245" ], "nozzle_temperature_initial_layer": [ - "245", - "230" + "245" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_speed": [ @@ -118,16 +109,5 @@ ], "textured_plate_temp_initial_layer": [ "80" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "pressure_advance": [ - "0.03", - "0.0525" - ], - "filament_flow_ratio": [ - "0.95", - "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json index fcee4d1f99..83c1b17971 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -1,21 +1,26 @@ { "type": "filament", "name": "Snapmaker PETG HF @U1 0.8 nozzle", - "renamed_from": "Snapmaker PETG HF U1 0.8 nozzle;Snapmaker PETG HF @U1 0.8 High Flow nozzle;Snapmaker PETG HF U1 0.8 High Flow nozzle", "inherits": "Snapmaker PETG HF @U1 base2", "from": "system", "setting_id": "ebANa67V4B2nwUaX", "instantiation": "true", "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive Standard" + ], + "filament_ramming_travel_time": [ + "0" + ], + "long_retractions_when_ec": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" ], "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "additional_cooling_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -28,35 +33,27 @@ "20" ], "fan_max_speed": [ - "60", "60" ], "fan_min_speed": [ - "30", "30" ], "filament_max_volumetric_speed": [ - "20", "20" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1", "1" ], "filament_start_gcode": [ @@ -66,15 +63,12 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "2", "2" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -84,15 +78,12 @@ "80" ], "nozzle_temperature": [ - "245", "245" ], "nozzle_temperature_initial_layer": [ - "245", - "230" + "245" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_speed": [ @@ -115,16 +106,5 @@ ], "textured_plate_temp_initial_layer": [ "80" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "pressure_advance": [ - "0.03", - "0.0525" - ], - "filament_flow_ratio": [ - "0.95", - "0.955" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json index 87612234c4..ee6234f406 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json @@ -1,36 +1,29 @@ { "type": "filament", "name": "Snapmaker PETG Translucent @U1 0.2 nozzle", - "renamed_from": "Snapmaker PETG Translucent U1 0.2 nozzle;Snapmaker PETG Translucent @U1 0.2 High Flow nozzle;Snapmaker PETG Translucent U1 0.2 High Flow nozzle", "inherits": "Snapmaker PETG Translucent @U1 base", "from": "system", "setting_id": "UTpedqYJysaoe3OI", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "additional_cooling_fan_speed": [ - "20", "20" ], "close_fan_the_first_x_layers": [ "3" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_max_speed": [ - "40", "40" ], "fan_min_speed": [ - "20", "20" ], "filament_cooling_moves": [ @@ -43,46 +36,36 @@ "1.25" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_loading_speed": [ "28" ], "filament_max_volumetric_speed": [ - "1", "1" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "50", "50" ], "filament_unloading_speed": [ @@ -92,26 +75,25 @@ "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], + "nozzle_temperature": [ + "245" + ], "nozzle_temperature_initial_layer": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.23", - "0.2875" + "0.23" ], "slow_down_min_speed": [ "10" @@ -123,14 +105,6 @@ "80" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json index 239e2c6c7a..e0e60a0e14 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json @@ -1,32 +1,26 @@ { "type": "filament", "name": "Snapmaker PETG Translucent @U1 0.4 nozzle", - "renamed_from": "Snapmaker PETG Translucent U1 0.4 nozzle;Snapmaker PETG Translucent @U1 0.4 High Flow nozzle;Snapmaker PETG Translucent U1 0.4 High Flow nozzle", "inherits": "Snapmaker PETG Translucent @U1 base", "from": "system", "setting_id": "k6UQJJASzFSfePqN", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "close_fan_the_first_x_layers": [ "3" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_max_speed": [ - "30", "30" ], "fan_min_speed": [ - "10", "10" ], "filament_cooling_moves": [ @@ -36,38 +30,30 @@ "24.99" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_loading_speed": [ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_unloading_speed": [ @@ -77,30 +63,25 @@ "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ "80" ], "nozzle_temperature": [ - "250", "250" ], "nozzle_temperature_initial_layer": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.04", - "0.05" + "0.04" ], "slow_down_min_speed": [ "10" @@ -113,16 +94,5 @@ ], "filament_density": [ "1.25" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "additional_cooling_fan_speed": [ - "0", - "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json index 48d397028c..14f59104f8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json @@ -1,32 +1,26 @@ { "type": "filament", "name": "Snapmaker PETG Translucent @U1 0.6 nozzle", - "renamed_from": "Snapmaker PETG Translucent U1 0.6 nozzle;Snapmaker PETG Translucent @U1 0.6 High Flow nozzle;Snapmaker PETG Translucent U1 0.6 High Flow nozzle", "inherits": "Snapmaker PETG Translucent @U1 base", "from": "system", "setting_id": "FlcbnP3kWiJLMDMl", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "close_fan_the_first_x_layers": [ "3" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_max_speed": [ - "60", "60" ], "fan_min_speed": [ - "20", "20" ], "filament_cost": [ @@ -36,30 +30,28 @@ "1.25" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_max_volumetric_speed": [ - "16", "16" ], "hot_plate_temp": [ "80" ], + "nozzle_temperature": [ + "245" + ], "nozzle_temperature_initial_layer": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.02", - "0.025" + "0.02" ], "slow_down_min_speed": [ "10" @@ -77,31 +69,24 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "1.2", "1.2" ], "filament_retraction_minimum_travel": [ - "1", "1" ], "filament_unloading_speed": [ @@ -111,22 +96,12 @@ "100" ], "filament_wipe_distance": [ - "2", "2" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json index d226179805..e746141f06 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json @@ -1,32 +1,26 @@ { "type": "filament", "name": "Snapmaker PETG Translucent @U1 0.8 nozzle", - "renamed_from": "Snapmaker PETG Translucent U1 0.8 nozzle;Snapmaker PETG Translucent @U1 0.8 High Flow nozzle;Snapmaker PETG Translucent U1 0.8 High Flow nozzle", "inherits": "Snapmaker PETG Translucent @U1 base", "from": "system", "setting_id": "aJk3TnFTU3uQGjd3", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "close_fan_the_first_x_layers": [ "3" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_max_speed": [ - "60", "60" ], "fan_min_speed": [ - "20", "20" ], "filament_cost": [ @@ -36,30 +30,28 @@ "1.25" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_max_volumetric_speed": [ - "16", "16" ], "hot_plate_temp": [ "80" ], + "nozzle_temperature": [ + "245" + ], "nozzle_temperature_initial_layer": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "230", "230" ], "overhang_fan_threshold": [ "10%" ], "pressure_advance": [ - "0.02", - "0.025" + "0.02" ], "slow_down_min_speed": [ "10" @@ -77,31 +69,24 @@ "28" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "30", "30" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_unloading_speed": [ @@ -111,18 +96,9 @@ "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json index 174e0f9d29..f0bae32788 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1.json @@ -1,88 +1,11 @@ { "type": "filament", "name": "Snapmaker PETG-CF @U1", - "renamed_from": "Snapmaker PETG-CF U1;Snapmaker PETG-CF @U1 0.4 High Flow nozzle;Snapmaker PETG-CF U1 0.4 High Flow nozzle", "inherits": "Snapmaker PETG-CF @U1 base", "from": "system", "setting_id": "i982wlNMSJujh6Vs", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_minimal_purge_on_wipe_tower": [ - "0", - "30" - ], - "nozzle_temperature_range_low": [ - "220", - "240" - ], - "fan_max_speed": [ - "20", - "40" - ], - "nozzle_temperature_initial_layer": [ - "250", - "260" - ], - "nozzle_temperature": [ - "245", - "260" - ], - "filament_multitool_ramming_volume": [ - "0", - "0.5" - ], - "additional_cooling_fan_speed": [ - "0", - "20" - ], - "nozzle_temperature_range_high": [ - "255", - "270" - ], - "filament_retraction_length": [ - "nil", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6.4", - "18" - ], - "filament_retract_length_toolchange": [ - "nil", - "nil" - ], - "pressure_advance": [ - "0.03", - "0.028" - ], - "enable_pressure_advance": [ - "0", - "1" - ], - "filament_multitool_ramming_flow": [ - "10", - "13" - ], - "fan_min_speed": [ - "0", - "5" - ], - "filament_flow_ratio": [ - "0.95", - "1.01" - ], - "filament_multitool_ramming": [ - "0", - "1" + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json index f8097b3a27..1a2f9e3ff3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1.json @@ -1,26 +1,17 @@ { "type": "filament", "name": "Snapmaker PLA @U1", - "renamed_from": "Snapmaker PLA U1;Snapmaker PLA @U1 0.4 High Flow nozzle;Snapmaker PLA U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA @U1 base", "from": "system", "setting_id": "upBaAiQ4fqmefjo6", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "hot_plate_temp": [ "55" ], "hot_plate_temp_initial_layer": [ "55" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 14 mm^3/s, from local standard fallback preset Snapmaker PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json index 4189cdd470..4b68672fa5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json @@ -1,38 +1,34 @@ { "type": "filament", "name": "Snapmaker PLA Basic @U1", - "renamed_from": "Snapmaker PLA Basic U1;Snapmaker PLA Basic @U1 0.4 High Flow nozzle;Snapmaker PLA Basic U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "ZtUJN4JpkR0MLpiY", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], + "additional_cooling_fan_speed": [ + "70" + ], "chamber_temperature": [ "0" ], @@ -43,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -56,14 +51,12 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -75,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.5" ], @@ -91,7 +90,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -101,7 +99,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_is_support": [ @@ -114,73 +111,60 @@ "50" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "25", "25" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", + "nil" + ], + "filament_retraction_length": [ "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -217,19 +201,15 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "full_fan_speed_layer": [ @@ -244,10 +224,18 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -258,7 +246,6 @@ "0.4157" ], "pressure_advance": [ - "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -293,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json index 52d6d8f92a..fadf7e59d2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1.json @@ -1,20 +1,11 @@ { "type": "filament", "name": "Snapmaker PLA Eco @U1", - "renamed_from": "Snapmaker PLA Eco U1;Snapmaker PLA Eco @U1 0.4 High Flow nozzle;Snapmaker PLA Eco U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Eco @U1 base", "from": "system", "setting_id": "mF73rtMhQQJz1bjt", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker PLA Eco @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json index 33ff1a785f..219e8075e5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json @@ -1,39 +1,35 @@ { "type": "filament", "name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", - "renamed_from": "Snapmaker PLA Full Spectrum U1 0.4 nozzle;Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle;Snapmaker PLA Full Spectrum U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "iybaFWrXKOsmXgMJ", "filament_id": "OFOPU1xv", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], + "additional_cooling_fan_speed": [ + "70" + ], "chamber_temperature": [ "0" ], @@ -44,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -57,15 +52,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -76,6 +69,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.5" ], @@ -92,7 +91,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -102,7 +100,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_is_support": [ @@ -115,77 +112,60 @@ "50" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "25", "25" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", - "5" + "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "nil", - "0.5" + "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -222,20 +202,16 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", - "Slope Lift" + "nil" ], "full_fan_speed_layer": [ "0" @@ -249,10 +225,18 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -263,8 +247,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -298,9 +281,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json index e3c4427434..907781cd2c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json @@ -1,25 +1,20 @@ { "type": "filament", "name": "Snapmaker PLA Glow @U1 0.4 nozzle", - "renamed_from": "Snapmaker PLA Glow U1 0.4 nozzle;Snapmaker PLA Glow @U1 0.4 High Flow nozzle;Snapmaker PLA Glow U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Glow @U1 base", "from": "system", "setting_id": "ee1YNNr8CwKetuvY", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "additional_cooling_fan_speed": [ - "80", - "100" + "80" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cooling_final_speed": [ @@ -35,8 +30,7 @@ "20" ], "filament_flow_ratio": [ - "0.97", - "0.98" + "0.97" ], "filament_loading_speed": [ "28" @@ -45,35 +39,27 @@ "3" ], "filament_max_volumetric_speed": [ - "16", - "18" + "16" ], "filament_minimal_purge_on_wipe_tower": [ - "30", "30" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "0.4", "0.4" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_unloading_speed": [ @@ -83,11 +69,9 @@ "100" ], "filament_z_hop": [ - "0.2", "0.2" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ @@ -107,16 +91,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "pressure_advance": [ - "0.02", - "0.023" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json index af90945691..d2c9dddefb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1.json @@ -1,38 +1,34 @@ { "type": "filament", "name": "Snapmaker PLA Lite @U1", - "renamed_from": "Snapmaker PLA Lite U1;Snapmaker PLA Lite @U1 0.4 High Flow nozzle;Snapmaker PLA Lite U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Lite @U1 base", "from": "system", "setting_id": "ZZyxuKUboYttCqgM", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], + "additional_cooling_fan_speed": [ + "70" + ], "chamber_temperature": [ "0" ], @@ -43,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -59,14 +54,12 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "1", "1" ], "eng_plate_temp": [ @@ -78,6 +71,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.5" ], @@ -94,7 +93,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -104,7 +102,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_is_support": [ @@ -117,69 +114,57 @@ "50" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "15", "15" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Snapmaker PLA Lite @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", + "nil" + ], + "filament_retraction_length": [ "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -216,19 +201,15 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "full_fan_speed_layer": [ @@ -243,10 +224,18 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -257,7 +246,6 @@ "0.4157" ], "pressure_advance": [ - "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -292,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "60" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json index 45190fa614..2a8c1e40c3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json @@ -1,36 +1,29 @@ { "type": "filament", "name": "Snapmaker PLA Matte @U1 0.2 nozzle", - "renamed_from": "Snapmaker PLA Matte U1 0.2 nozzle;Snapmaker PLA Matte @U1 0.2 High Flow nozzle;Snapmaker PLA Matte U1 0.2 High Flow nozzle", "inherits": "Snapmaker PLA Matte @U1 base2", "from": "system", "setting_id": "d3c48DeNk7VDeeHf", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "chamber_temperature": [ @@ -43,7 +36,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -59,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "45" @@ -78,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "24.99" ], @@ -94,53 +90,45 @@ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "2", "2" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", + "nil" + ], + "filament_retraction_length": [ "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_shrink": [ @@ -168,15 +156,12 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "full_fan_speed_layer": [ @@ -186,9 +171,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -226,7 +213,6 @@ "40" ], "filament_max_volumetric_speed": [ - "2", "2" ], "hot_plate_temp": [ @@ -242,7 +228,6 @@ "65" ], "additional_cooling_fan_speed": [ - "80", "80" ], "filament_cooling_final_speed": [ @@ -255,12 +240,10 @@ "2" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1.05", - "1.0395" + "1.05" ], "filament_loading_speed": [ "10" @@ -269,19 +252,15 @@ "50" ], "filament_minimal_purge_on_wipe_tower": [ - "5", "5" ], "filament_multitool_ramming_flow": [ - "4", "4" ], "filament_multitool_ramming_volume": [ - "4", "4" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_stamping_distance": [ @@ -294,23 +273,15 @@ "100" ], "filament_z_hop_types": [ - "nil", "nil" ], "nozzle_temperature": [ - "215", - "220" + "215" ], "nozzle_temperature_initial_layer": [ - "215", - "220" + "215" ], "pressure_advance": [ - "0.025", - "0.03" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "0.025" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json index 9252983f4f..9de7615ae5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json @@ -1,36 +1,29 @@ { "type": "filament", "name": "Snapmaker PLA Matte @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA Matte U1 0.6 nozzle;Snapmaker PLA Matte @U1 0.6 High Flow nozzle;Snapmaker PLA Matte U1 0.6 High Flow nozzle", "inherits": "Snapmaker PLA Matte @U1 base2", "from": "system", "setting_id": "l3E1WaljDn2uoTqW", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "chamber_temperature": [ @@ -43,7 +36,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -59,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "45" @@ -78,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "24.99" ], @@ -85,7 +81,6 @@ "1.26" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -98,65 +93,51 @@ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -184,19 +165,15 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "full_fan_speed_layer": [ @@ -206,9 +183,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -252,7 +231,6 @@ "45" ], "additional_cooling_fan_speed": [ - "80", "80" ], "filament_cooling_final_speed": [ @@ -265,8 +243,7 @@ "2" ], "filament_flow_ratio": [ - "0.99", - "0.9801" + "0.99" ], "filament_loading_speed": [ "10" @@ -275,15 +252,12 @@ "50" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retraction_length": [ - "0.6", "0.6" ], "filament_stamping_distance": [ @@ -302,19 +276,12 @@ "65" ], "nozzle_temperature": [ - "215", - "220" + "215" ], "nozzle_temperature_initial_layer": [ - "215", - "220" + "215" ], "pressure_advance": [ - "0.015", - "0.018" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "0.015" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json index 0c7bd7c613..251b2a47b6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json @@ -1,36 +1,29 @@ { "type": "filament", "name": "Snapmaker PLA Matte @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA Matte U1 0.8 nozzle;Snapmaker PLA Matte @U1 0.8 High Flow nozzle;Snapmaker PLA Matte U1 0.8 High Flow nozzle", "inherits": "Snapmaker PLA Matte @U1 base2", "from": "system", "setting_id": "NLPd4AA0seW3NXdy", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "chamber_temperature": [ @@ -43,7 +36,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -59,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "45" @@ -78,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "24.99" ], @@ -91,68 +87,54 @@ " " ], "filament_flow_ratio": [ - "0.98", - "0.9702" + "0.98" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "20", "20" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_shrink": [ @@ -180,19 +162,15 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "full_fan_speed_layer": [ @@ -202,9 +180,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -242,8 +222,7 @@ "40" ], "nozzle_temperature": [ - "215", - "220" + "215" ], "textured_plate_temp": [ "65" @@ -252,7 +231,6 @@ "65" ], "additional_cooling_fan_speed": [ - "80", "80" ], "filament_cooling_final_speed": [ @@ -265,7 +243,6 @@ "2" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_loading_speed": [ @@ -275,19 +252,15 @@ "50" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retraction_length": [ - "0.6", "0.6" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_stamping_distance": [ @@ -306,15 +279,9 @@ "65" ], "nozzle_temperature_initial_layer": [ - "215", - "220" + "215" ], "pressure_advance": [ - "0.015", - "0.018" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "0.015" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json index a29fcc6eb2..badf918d97 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json @@ -1,42 +1,34 @@ { "type": "filament", "name": "Snapmaker PLA Matte @U1", - "renamed_from": "Snapmaker PLA Matte U1;Snapmaker PLA Matte @U1 0.4 High Flow nozzle;Snapmaker PLA Matte U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA @U1 base", "from": "system", "setting_id": "uAhykL5ap1DAKacf", "filament_id": "OFF9cgY5", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "80", - "100" + "80" ], "chamber_temperature": [ "0" @@ -48,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -61,15 +52,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -80,6 +69,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.5" ], @@ -95,6 +90,9 @@ "filament_density": [ "1.32" ], + "filament_deretraction_speed": [ + "nil" + ], "filament_diameter": [ "1.75" ], @@ -102,8 +100,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1", - "0.99" + "1" ], "filament_is_support": [ "0" @@ -115,61 +112,60 @@ "50" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "22", - "40" + "22" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], + "filament_retract_before_wipe": [ + "nil" + ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "nil", - "1" + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -205,13 +201,17 @@ "filament_vendor": [ "Snapmaker" ], + "filament_wipe": [ + "nil" + ], "filament_wipe_distance": [ - "nil", - "1" + "nil" + ], + "filament_z_hop": [ + "nil" ], "filament_z_hop_types": [ - "nil", - "Slope Lift" + "nil" ], "full_fan_speed_layer": [ "0" @@ -226,12 +226,16 @@ "0" ], "nozzle_temperature": [ - "215", - "220" + "215" ], "nozzle_temperature_initial_layer": [ - "215", - "220" + "215" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" ], "overhang_fan_speed": [ "100" @@ -243,8 +247,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -278,9 +281,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json index 2c2d57761d..538158a155 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1.json @@ -1,20 +1,11 @@ { "type": "filament", "name": "Snapmaker PLA Metal @U1", - "renamed_from": "Snapmaker PLA Metal U1;Snapmaker PLA Metal @U1 0.4 High Flow nozzle;Snapmaker PLA Metal U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Metal @U1 base", "from": "system", "setting_id": "lPmCxsx9EpoLoNEk", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from local standard fallback preset Snapmaker PLA Metal @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Snapmaker U1 (0.4 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json index a6d4993ef3..e4fdb8016b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json @@ -1,41 +1,33 @@ { "type": "filament", "name": "Snapmaker PLA Silk @U1 0.2 nozzle", - "renamed_from": "Snapmaker PLA Silk U1 0.2 nozzle;Snapmaker PLA Silk @U1 0.2 High Flow nozzle;Snapmaker PLA Silk U1 0.2 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "Q5xH6oGGlbXr14Pa", "filament_id": "OFWgFOjn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -48,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -58,14 +49,12 @@ "60" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -77,6 +66,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "25.4" ], @@ -84,7 +79,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -94,76 +88,60 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1.02", "1.02" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "3", "3" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -191,19 +169,15 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -213,9 +187,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -277,11 +253,9 @@ "3" ], "filament_max_volumetric_speed": [ - "2", "2" ], "filament_retraction_length": [ - "0.4", "0.4" ], "filament_stamping_distance": [ @@ -300,19 +274,12 @@ "65" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "pressure_advance": [ - "0.015", "0.015" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json index 32a942090a..b144ce86dd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json @@ -1,41 +1,33 @@ { "type": "filament", "name": "Snapmaker PLA Silk @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA Silk U1 0.6 nozzle;Snapmaker PLA Silk @U1 0.6 High Flow nozzle;Snapmaker PLA Silk U1 0.6 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "2pieDQoz9PiDCnU1", "filament_id": "OFWgFOjn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -48,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -58,14 +49,12 @@ "60" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -77,6 +66,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "25.4" ], @@ -84,7 +79,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -94,76 +88,60 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -191,19 +169,15 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "1", "1" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -213,9 +187,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -277,11 +253,9 @@ "3" ], "filament_max_volumetric_speed": [ - "10", "10" ], "filament_retraction_length": [ - "0.4", "0.4" ], "filament_stamping_distance": [ @@ -300,19 +274,12 @@ "65" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "pressure_advance": [ - "0.015", "0.015" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json index 45b4239ac3..aa92e97d18 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json @@ -1,41 +1,33 @@ { "type": "filament", "name": "Snapmaker PLA Silk @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA Silk U1 0.8 nozzle;Snapmaker PLA Silk @U1 0.8 High Flow nozzle;Snapmaker PLA Silk U1 0.8 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "f3H0JFUnds0mkKCN", "filament_id": "OFWgFOjn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -48,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -58,14 +49,12 @@ "60" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -77,6 +66,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "25.4" ], @@ -84,7 +79,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -94,76 +88,60 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -191,19 +169,15 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "1", "1" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -213,9 +187,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -277,11 +253,9 @@ "3" ], "filament_max_volumetric_speed": [ - "10", "10" ], "filament_retraction_length": [ - "0.4", "0.4" ], "filament_stamping_distance": [ @@ -300,19 +274,12 @@ "65" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "pressure_advance": [ - "0.015", "0.015" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json index 1f3a8d469c..6b6030b919 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json @@ -1,42 +1,34 @@ { "type": "filament", "name": "Snapmaker PLA Silk @U1", - "renamed_from": "Snapmaker PLA Silk U1;Snapmaker PLA Silk @U1 0.4 High Flow nozzle;Snapmaker PLA Silk U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "9PkHSwtXFM0zPWth", "filament_id": "OFWgFOjn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "70", - "80" + "70" ], "chamber_temperature": [ "0" @@ -48,7 +40,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -58,14 +49,12 @@ "60" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -77,6 +66,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cost": [ "25.4" ], @@ -84,7 +79,6 @@ "1.32" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -94,76 +88,60 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.98", "0.98" ], "filament_is_support": [ "0" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "25", "25" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -191,20 +169,16 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", - "Slope Lift" + "nil" ], "full_fan_speed_layer": [ "0" @@ -213,9 +187,11 @@ "0" ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -277,11 +253,9 @@ "3" ], "filament_max_volumetric_speed": [ - "10", - "12" + "10" ], "filament_retraction_length": [ - "0.2", "0.2" ], "filament_stamping_distance": [ @@ -300,19 +274,12 @@ "65" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "pressure_advance": [ - "0.015", "0.015" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json index 81b61550a4..7fcb20f31b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json @@ -1,37 +1,29 @@ { "type": "filament", "name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "renamed_from": "Snapmaker PLA SnapSpeed U1 0.2 nozzle;Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.2 High Flow nozzle", "inherits": "Snapmaker PLA SnapSpeed @U1 base2", "from": "system", "setting_id": "jsAgNNiUC6DoO7rz", "instantiation": "true", "filament_deretraction_speed": [ - "30", "30" ], "filament_flow_ratio": [ - "1.01", "1.01" ], "filament_max_volumetric_speed": [ - "2", "2" ], "filament_multitool_ramming_flow": [ - "30", "30" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_speed": [ - "30", "30" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp": [ @@ -41,8 +33,7 @@ "65" ], "pressure_advance": [ - "0.2", - "0.24" + "0.2" ], "textured_plate_temp": [ "65" @@ -51,18 +42,9 @@ "65" ], "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json index df71144582..18fca8b4fd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json @@ -1,41 +1,32 @@ { "type": "filament", "name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA SnapSpeed U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.6 High Flow nozzle", "inherits": "Snapmaker PLA SnapSpeed @U1 base2", "from": "system", "setting_id": "aKudBpQBj3MZZZav", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filament_deretraction_speed": [ - "30", "30" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_multitool_ramming_flow": [ - "30", "30" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1.6", "1.6" ], "filament_retraction_speed": [ - "30", "30" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "textured_plate_temp": [ @@ -45,18 +36,6 @@ "65" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "pressure_advance": [ - "0.02", - "0.024" + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json index b7610458eb..2ebadbd2b2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json @@ -1,42 +1,33 @@ { "type": "filament", "name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA SnapSpeed U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.8 High Flow nozzle", "inherits": "Snapmaker PLA SnapSpeed @U1 base2", "from": "system", "setting_id": "sWoInox4hzxzIHfe", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_deretraction_speed": [ - "30", "30" ], "filament_multitool_ramming_flow": [ - "30", "30" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "1.6", "1.6" ], "filament_retraction_speed": [ - "30", "30" ], "nozzle_temperature": [ - "215", "215" ], "pressure_advance": [ - "0.018", - "0.0216" + "0.018" ], "textured_plate_temp": [ "65" @@ -45,14 +36,6 @@ "65" ], "enable_pressure_advance": [ - "0", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json index 0694e43e88..2525f5b2a9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json @@ -1,38 +1,34 @@ { "type": "filament", "name": "Snapmaker PLA SnapSpeed @U1", - "renamed_from": "Snapmaker PLA SnapSpeed U1;Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle;Snapmaker PLA SnapSpeed U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA SnapSpeed @U1 base", "from": "system", "setting_id": "en6Pvvbc1P9TKm8I", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], + "additional_cooling_fan_speed": [ + "70" + ], "chamber_temperature": [ "0" ], @@ -43,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -56,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -75,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.5" ], @@ -91,7 +90,6 @@ "1.24" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_diameter": [ @@ -101,7 +99,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.966", "0.966" ], "filament_is_support": [ @@ -114,77 +111,60 @@ "50" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "20", - "40" + "20" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "30", - "40" + "30" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "nil", "nil" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", "nil" ], "filament_retract_restart_extra": [ - "nil", "nil" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "1.2", "1.2" ], "filament_retraction_minimum_travel": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -221,19 +201,15 @@ "Snapmaker" ], "filament_wipe": [ - "nil", "nil" ], "filament_wipe_distance": [ - "nil", "nil" ], "filament_z_hop": [ - "0.4", "0.4" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -248,10 +224,18 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], "nozzle_temperature_range_high": [ - "240", "240" ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -262,8 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -297,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json index 22d1c3af57..6271b7af42 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json @@ -1,40 +1,32 @@ { "type": "filament", "name": "Snapmaker PLA Translucent @U1 0.2 nozzle", - "renamed_from": "Snapmaker PLA Translucent U1 0.2 nozzle;Snapmaker PLA Translucent @U1 0.2 High Flow nozzle;Snapmaker PLA Translucent U1 0.2 High Flow nozzle", "inherits": "Snapmaker PLA Translucent @U1 base", "from": "system", "setting_id": "zIg9XLrieYNBduyn", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -47,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -60,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -79,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.4" ], @@ -94,6 +89,9 @@ "filament_density": [ "1.22" ], + "filament_deretraction_speed": [ + "nil" + ], "filament_diameter": [ "1.75" ], @@ -101,7 +99,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1.02", "1.02" ], "filament_is_support": [ @@ -114,65 +111,60 @@ "3" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "1.6", "1.6" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "0%", "0%" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "0.2", "0.2" ], + "filament_retraction_minimum_travel": [ + "nil" + ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -209,15 +201,15 @@ "Snapmaker" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "1", "1" ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -232,8 +224,16 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], "nozzle_temperature_range_low": [ - "200", "200" ], "overhang_fan_speed": [ @@ -246,8 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.15", - "0.18" + "0.15" ], "reduce_fan_stop_start_freq": [ "1" @@ -281,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json index 060156df75..7d4270ef31 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json @@ -1,40 +1,32 @@ { "type": "filament", "name": "Snapmaker PLA Translucent @U1 0.4 nozzle", - "renamed_from": "Snapmaker PLA Translucent U1 0.4 nozzle;Snapmaker PLA Translucent @U1 0.4 High Flow nozzle;Snapmaker PLA Translucent U1 0.4 High Flow nozzle", "inherits": "Snapmaker PLA Translucent @U1 base", "from": "system", "setting_id": "RqtrcLcy124ICGEc", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -47,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -60,12 +51,14 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], + "enable_pressure_advance": [ + "1" + ], "eng_plate_temp": [ "60" ], @@ -75,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.4" ], @@ -90,6 +89,9 @@ "filament_density": [ "1.32" ], + "filament_deretraction_speed": [ + "nil" + ], "filament_diameter": [ "1.75" ], @@ -97,7 +99,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_is_support": [ @@ -110,61 +111,60 @@ "3" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ - "50", "50" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], + "filament_retract_before_wipe": [ + "nil" + ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "0.2", "0.2" ], + "filament_retraction_minimum_travel": [ + "nil" + ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -200,8 +200,16 @@ "filament_vendor": [ "Snapmaker" ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -216,6 +224,18 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], "overhang_fan_speed": [ "100" ], @@ -226,8 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -261,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json index 3dc4c73ada..af3f95c757 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json @@ -1,40 +1,32 @@ { "type": "filament", "name": "Snapmaker PLA Translucent @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA Translucent U1 0.6 nozzle;Snapmaker PLA Translucent @U1 0.6 High Flow nozzle;Snapmaker PLA Translucent U1 0.6 High Flow nozzle", "inherits": "Snapmaker PLA Translucent @U1 base", "from": "system", "setting_id": "OZHemzEcvzFMN8fL", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -47,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -60,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -79,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.4" ], @@ -94,12 +89,18 @@ "filament_density": [ "1.22" ], + "filament_deretraction_speed": [ + "nil" + ], "filament_diameter": [ "1.75" ], "filament_end_gcode": [ "; filament end gcode \n" ], + "filament_flow_ratio": [ + "0.98" + ], "filament_is_support": [ "0" ], @@ -110,65 +111,60 @@ "3" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "0%", "0%" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "0.5", "0.5" ], + "filament_retraction_minimum_travel": [ + "nil" + ], "filament_retraction_speed": [ - "50", "50" ], "filament_shrink": [ @@ -204,8 +200,16 @@ "filament_vendor": [ "Snapmaker" ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -220,8 +224,16 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], "nozzle_temperature_range_low": [ - "200", "200" ], "overhang_fan_speed": [ @@ -234,8 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -269,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json index a975052b1b..a10a4b2fb1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json @@ -1,40 +1,32 @@ { "type": "filament", "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA Translucent U1 0.8 nozzle;Snapmaker PLA Translucent @U1 0.8 High Flow nozzle;Snapmaker PLA Translucent U1 0.8 High Flow nozzle", "inherits": "Snapmaker PLA Translucent @U1 base", "from": "system", "setting_id": "IPehCg9fKawLorB5", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], "additional_cooling_fan_speed": [ - "100", "100" ], "chamber_temperature": [ @@ -47,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -60,15 +51,13 @@ "0" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "eng_plate_temp": [ "60" @@ -79,6 +68,12 @@ "fan_cooling_layer_time": [ "100" ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], "filament_cooling_final_speed": [ "3.4" ], @@ -94,6 +89,9 @@ "filament_density": [ "1.22" ], + "filament_deretraction_speed": [ + "nil" + ], "filament_diameter": [ "1.75" ], @@ -101,7 +99,6 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.95", "0.95" ], "filament_is_support": [ @@ -114,65 +111,60 @@ "3" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "12", "12" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], "filament_retract_before_wipe": [ - "0%", "0%" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "1", "1" ], + "filament_retraction_minimum_travel": [ + "nil" + ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_shrink": [ @@ -208,8 +200,16 @@ "filament_vendor": [ "Snapmaker" ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "full_fan_speed_layer": [ @@ -224,8 +224,16 @@ "idle_temperature": [ "0" ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], "nozzle_temperature_range_low": [ - "200", "200" ], "overhang_fan_speed": [ @@ -238,8 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.02", - "0.024" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -273,9 +280,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json index 84febf3f84..283d5876b7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json @@ -1,28 +1,27 @@ { "type": "filament", "name": "Snapmaker PLA Wood @U1 0.4 nozzle", - "renamed_from": "Snapmaker PLA Wood U1 0.4 nozzle;Snapmaker PLA Wood @U1 0.4 High Flow nozzle;Snapmaker PLA Wood U1 0.4 High Flow nozzle", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "XvizDDHbds3bVrzi", "filament_id": "OFdd8ZqJ", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_start_gcode": [ "" ], + "enable_pressure_advance": [ + "1" + ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_vendor": [ @@ -41,45 +40,36 @@ "65" ], "filament_flow_ratio": [ - "0.97", "0.97" ], "filament_max_volumetric_speed": [ - "18", - "20" + "18" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "5", - "6" + "5" ], "filament_retraction_length": [ - "0.6", "0.6" ], "pressure_advance": [ - "0.025", - "0.024" + "0.025" ], "slow_down_layer_time": [ "4" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -89,26 +79,21 @@ "35" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "nozzle_temperature": [ - "220", "220" ], "overhang_fan_threshold": [ @@ -119,16 +104,5 @@ ], "temperature_vitrification": [ "45" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_z_hop_types": [ - "nil", - "Auto Lift" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json index 39dc566a93..09555457d5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json @@ -1,32 +1,27 @@ { "type": "filament", "name": "Snapmaker PLA Wood @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA Wood U1 0.6 nozzle;Snapmaker PLA Wood @U1 0.6 High Flow nozzle;Snapmaker PLA Wood U1 0.6 High Flow nozzle", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "Kp77DCcitdmoyjqm", "filament_id": "OFdd8ZqJ", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filament_start_gcode": [ "" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_vendor": [ @@ -44,50 +39,43 @@ "hot_plate_temp_initial_layer": [ "65" ], + "filament_flow_ratio": [ + "0.98" + ], "filament_max_volumetric_speed": [ - "18", "18" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "0.4", "0.4" ], "pressure_advance": [ - "0.014", - "0.0134" + "0.014" ], "slow_down_layer_time": [ "4" ], "additional_cooling_fan_speed": [ - "100", "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -97,26 +85,21 @@ "35" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "nozzle_temperature": [ - "220", "220" ], "overhang_fan_threshold": [ @@ -127,12 +110,5 @@ ], "temperature_vitrification": [ "45" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json index 5aca28812f..4a5a04a5ee 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json @@ -1,32 +1,27 @@ { "type": "filament", "name": "Snapmaker PLA Wood @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA Wood U1 0.8 nozzle;Snapmaker PLA Wood @U1 0.8 High Flow nozzle;Snapmaker PLA Wood U1 0.8 High Flow nozzle", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "nBYnNiqwLo6nAsqi", "filament_id": "OFdd8ZqJ", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_start_gcode": [ "" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "filament_end_gcode": [ "\n" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_vendor": [ @@ -45,53 +40,42 @@ "65" ], "filament_flow_ratio": [ - "0.965", "0.965" ], "filament_max_volumetric_speed": [ - "20", "20" ], "filament_multitool_ramming_flow": [ - "40", "40" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "5", "5" ], "filament_retraction_length": [ - "0.4", "0.4" ], "pressure_advance": [ - "0.007", - "0.0067" + "0.007" ], "slow_down_layer_time": [ "4" ], "additional_cooling_fan_speed": [ - "100", "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -101,26 +85,21 @@ "35" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "nozzle_temperature": [ - "220", "220" ], "overhang_fan_threshold": [ @@ -131,12 +110,5 @@ ], "temperature_vitrification": [ "45" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json index 88e0fdd7db..357c5de50a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -1,26 +1,26 @@ { "type": "filament", "name": "Snapmaker PLA-CF @U1 0.4 nozzle", - "renamed_from": "Snapmaker PLA-CF @U1;Snapmaker PLA-CF @U1 0.4 High Flow nozzle;Snapmaker PLA-CF U1 0.4 High Flow nozzle", + "renamed_from": "Snapmaker PLA-CF @U1", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "2INwruC3ZVkBTdUT", "filament_id": "OFhQf8ou", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "1" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", - "30" + "20" ], "filament_start_gcode": [ "" @@ -40,66 +40,55 @@ "hot_plate_temp_initial_layer": [ "65" ], + "filament_flow_ratio": [ + "0.98" + ], "filament_max_volumetric_speed": [ - "15", - "20" + "15" ], "filament_minimal_purge_on_wipe_tower": [ - "50", "50" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "5", - "15" + "5" ], "filament_retraction_length": [ - "1", - "0.8" + "1" ], "filament_type": [ "PLA-CF" ], "filament_z_hop": [ - "0.4", "0.4" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "240", - "230" + "240" ], "nozzle_temperature_initial_layer": [ - "240", - "230" + "240" ], "nozzle_temperature_range_high": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "200", "200" ], "pressure_advance": [ - "0.01", - "0.02" + "0.01" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -109,22 +98,18 @@ "45" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "overhang_fan_threshold": [ @@ -143,14 +128,6 @@ "45" ], "additional_cooling_fan_speed": [ - "0", - "100" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "0" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json index 24ca2d1603..6f09ea5d6a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json @@ -1,29 +1,24 @@ { "type": "filament", "name": "Snapmaker PLA-CF @U1 0.6 nozzle", - "renamed_from": "Snapmaker PLA-CF U1 0.6 nozzle;Snapmaker PLA-CF @U1 0.6 High Flow nozzle;Snapmaker PLA-CF U1 0.6 High Flow nozzle", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "CKfdL85SvbOLzMuP", "filament_id": "OFhQf8ou", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "25", "25" ], "filament_start_gcode": [ @@ -44,52 +39,47 @@ "hot_plate_temp_initial_layer": [ "65" ], + "filament_flow_ratio": [ + "0.98" + ], "filament_max_volumetric_speed": [ - "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "2", "2" ], "filament_type": [ "PLA-CF" ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "220", - "210" + "220" ], "nozzle_temperature_initial_layer": [ - "220", - "210" + "220" ], "nozzle_temperature_range_high": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "210", "210" ], "pressure_advance": [ - "0.015", - "0.03" + "0.015" ], "filament_cost": [ "35" @@ -101,18 +91,15 @@ "8" ], "filament_wipe_distance": [ - "2", "2" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -122,19 +109,15 @@ "45" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "overhang_fan_threshold": [ @@ -150,14 +133,6 @@ "45" ], "additional_cooling_fan_speed": [ - "0", "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json index e20c31fc91..564e59e1a9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json @@ -1,29 +1,24 @@ { "type": "filament", "name": "Snapmaker PLA-CF @U1 0.8 nozzle", - "renamed_from": "Snapmaker PLA-CF U1 0.8 nozzle;Snapmaker PLA-CF @U1 0.8 High Flow nozzle;Snapmaker PLA-CF U1 0.8 High Flow nozzle", "inherits": "fdm_filament_pla", "from": "system", "setting_id": "fhhnfJm4dN9FXpWQ", "filament_id": "OFhQf8ou", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "enable_pressure_advance": [ - "0", - "1" + "0" ], "filament_end_gcode": [ "" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "25", "25" ], "filament_start_gcode": [ @@ -44,52 +39,47 @@ "hot_plate_temp_initial_layer": [ "65" ], + "filament_flow_ratio": [ + "0.98" + ], "filament_max_volumetric_speed": [ - "18", "18" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "3", "3" ], "filament_type": [ "PLA-CF" ], + "filament_z_hop": [ + "nil" + ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "nozzle_temperature": [ - "220", - "210" + "220" ], "nozzle_temperature_initial_layer": [ - "220", - "210" + "220" ], "nozzle_temperature_range_high": [ - "250", "250" ], "nozzle_temperature_range_low": [ - "210", "210" ], "pressure_advance": [ - "0.015", - "0.03" + "0.015" ], "filament_cost": [ "35" @@ -101,14 +91,12 @@ "8" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -118,19 +106,15 @@ "45" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "overhang_fan_threshold": [ @@ -146,14 +130,6 @@ "45" ], "additional_cooling_fan_speed": [ - "0", "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json index 12796319d8..b28e0627ad 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json @@ -1,81 +1,68 @@ { "type": "filament", "name": "Snapmaker PVA @U1 0.6 nozzle", - "renamed_from": "Snapmaker PVA U1 0.6 nozzle;Snapmaker PVA @U1 0.6 High Flow nozzle;Snapmaker PVA U1 0.6 High Flow nozzle", "inherits": "Snapmaker PVA @U1 base", "from": "system", "setting_id": "lIqgnfeZdAm8G0TH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" + ], + "enable_pressure_advance": [ + "0" ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "filament_cost": [ "79.98" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "0.98", - "0.9506" + "0.98" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "nil", "nil" ], "filament_retraction_minimum_travel": [ - "1", "1" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_soluble": [ "1" ], "filament_wipe_distance": [ - "2", "2" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ - "230", "230" ], "nozzle_temperature_initial_layer": [ - "230", "230" ], "nozzle_temperature_range_low": [ - "210", "210" ], "pressure_advance": [ - "0.03", "0.03" ], "slow_down_layer_time": [ @@ -103,19 +90,15 @@ "3" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_unloading_speed": [ @@ -125,14 +108,6 @@ "100" ], "fan_min_speed": [ - "100", "100" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json index 8197f2b927..6572a60078 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json @@ -1,55 +1,47 @@ { "type": "filament", "name": "Snapmaker PVA @U1 0.8 nozzle", - "renamed_from": "Snapmaker PVA U1 0.8 nozzle;Snapmaker PVA @U1 0.8 High Flow nozzle;Snapmaker PVA U1 0.8 High Flow nozzle", "inherits": "Snapmaker PVA @U1 base", "from": "system", "setting_id": "WxtuvwWxy73Gi0IK", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" + ], + "enable_pressure_advance": [ + "0" ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_min_speed": [ - "100", "100" ], "filament_cost": [ "79.98" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "0.96", - "0.9312" + "0.96" ], "filament_retract_length_toolchange": [ - "10", "10" ], "filament_retraction_length": [ - "nil", "nil" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_soluble": [ @@ -59,19 +51,15 @@ "65" ], "nozzle_temperature": [ - "225", "225" ], "nozzle_temperature_initial_layer": [ - "225", "225" ], "nozzle_temperature_range_low": [ - "205", "205" ], "pressure_advance": [ - "0.03", "0.03" ], "slow_down_layer_time": [ @@ -99,19 +87,15 @@ "3" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_flow": [ - "20", "20" ], "filament_multitool_ramming_volume": [ - "5", "5" ], "filament_unloading_speed": [ @@ -119,12 +103,5 @@ ], "filament_unloading_speed_start": [ "100" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json index ff6341e89d..5ed5d243ac 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json @@ -1,44 +1,35 @@ { "type": "filament", "name": "Snapmaker PVA @U1", - "renamed_from": "Snapmaker PVA U1;Snapmaker PVA @U1 0.4 High Flow nozzle;Snapmaker PVA U1 0.4 High Flow nozzle", "inherits": "Snapmaker PVA @U1 base", "from": "system", "setting_id": "A9gyeySGTtUrTPeG", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "enable_pressure_advance": [ - "1", "1" ], "nozzle_temperature_range_high": [ - "240", "240" ], "pressure_advance": [ - "0.03", "0.03" ], "additional_cooling_fan_speed": [ - "70", "70" ], "close_fan_the_first_x_layers": [ "1" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "fan_min_speed": [ - "100", "100" ], "filament_cooling_final_speed": [ @@ -51,7 +42,6 @@ "4" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_loading_speed": [ @@ -61,31 +51,24 @@ "3" ], "filament_max_volumetric_speed": [ - "5", - "6" + "5" ], "filament_minimal_purge_on_wipe_tower": [ - "20", "20" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], "filament_retract_length_toolchange": [ - "4", "4" ], "filament_retraction_length": [ - "0.4", - "0.6" + "0.4" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_unloading_speed": [ @@ -95,18 +78,15 @@ "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "hot_plate_temp_initial_layer": [ "65" ], "nozzle_temperature": [ - "240", "240" ], "nozzle_temperature_initial_layer": [ - "240", "240" ], "slow_down_layer_time": [ @@ -117,20 +97,5 @@ ], "textured_plate_temp_initial_layer": [ "65" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "High-flow nozzle: Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_multitool_ramming_flow": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "0.97" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json index 04059f3e60..a4214b6cd0 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPE @U1.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Snapmaker TPE @U1", - "renamed_from": "Snapmaker TPE U1;Snapmaker TPE @U1 0.4 High Flow nozzle;Snapmaker TPE U1 0.4 High Flow nozzle", "inherits": "Snapmaker TPU @U1 base", "from": "system", "setting_id": "aqE9IR6dFd2MQLXR", "filament_id": "OFWTAEjH", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "hot_plate_temp": [ "45" @@ -21,32 +19,24 @@ "65" ], "filament_flow_ratio": [ - "1.1", "1.1" ], "filament_density": [ "1.22" ], "filament_max_volumetric_speed": [ - "7.2", "7.2" ], "fan_max_speed": [ - "65", "65" ], "fan_min_speed": [ - "65", "65" ], "default_filament_colour": [ "" ], "filament_notes": [ - "Standard nozzle: eSUN eLastic TPE-83A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.2 mm^3/s, from local standard fallback preset Snapmaker TPE @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "eSUN eLastic TPE-83A\n" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json index 00133cde35..afb529e983 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json @@ -1,19 +1,16 @@ { "type": "filament", "name": "Snapmaker TPU 90A @U1 0.6 nozzle", - "renamed_from": "Snapmaker TPU 90A U1 0.6 nozzle;Snapmaker TPU 90A @U1 0.6 High Flow nozzle;Snapmaker TPU 90A U1 0.6 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "uQCplebxmpBpzsnk", "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ - "3.2", "3.2" ], "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -22,85 +19,69 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], "pressure_advance": [ - "0.02", "0.02" ], "additional_cooling_fan_speed": [ - "100", "100" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], + "enable_pressure_advance": [ + "0" + ], "filament_deretraction_speed": [ - "20", "20" ], "filament_flow_ratio": [ - "1.093", "1.093" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "4", "4" ], "filament_retraction_length": [ - "0.6", "0.6" ], "filament_retraction_speed": [ - "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "220", "220" ], "nozzle_temperature_initial_layer": [ - "220", "220" ], "slow_down_layer_time": [ "14" ], "nozzle_temperature_range_high": [ - "240", "240" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "filament_wipe": [ - "1", "1" ], "filament_wipe_distance": [ - "0", "0" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ @@ -119,34 +100,27 @@ "30" ], "fan_max_speed": [ - "100", "100" ], "fan_min_speed": [ - "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -171,14 +145,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json index 5330e38078..8cf3452469 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json @@ -1,19 +1,16 @@ { "type": "filament", "name": "Snapmaker TPU 90A @U1 0.8 nozzle", - "renamed_from": "Snapmaker TPU 90A U1 0.8 nozzle;Snapmaker TPU 90A @U1 0.8 High Flow nozzle;Snapmaker TPU 90A U1 0.8 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "w4Hpl2qNPmgNvaeM", "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ - "3.5", "3.5" ], "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -22,73 +19,63 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], "pressure_advance": [ - "0.02", "0.02" ], + "additional_cooling_fan_speed": [ + "70" + ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], + "enable_pressure_advance": [ + "0" + ], "filament_deretraction_speed": [ - "20", "20" ], "filament_flow_ratio": [ - "1.095", "1.095" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "4", "4" ], "filament_retraction_length": [ - "1.2", "1.2" ], "filament_retraction_speed": [ - "20", "20" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "220", "220" ], "nozzle_temperature_initial_layer": [ - "220", "220" ], "slow_down_layer_time": [ "14" ], "nozzle_temperature_range_high": [ - "240", "240" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ @@ -107,34 +94,27 @@ "30" ], "fan_max_speed": [ - "100", "100" ], "fan_min_speed": [ - "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -159,14 +139,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json index 77e002298e..8f6ba9663f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json @@ -1,19 +1,16 @@ { "type": "filament", "name": "Snapmaker TPU 90A @U1", - "renamed_from": "Snapmaker TPU 90A U1;Snapmaker TPU 90A @U1 0.4 High Flow nozzle;Snapmaker TPU 90A U1 0.4 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "T4MmgICRrSzvmCZ5", "filament_id": "OFY7jxcS", "instantiation": "true", "filament_max_volumetric_speed": [ - "3.2", "3.2" ], "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -22,65 +19,57 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], "pressure_advance": [ - "0.4", "0.4" ], "additional_cooling_fan_speed": [ - "100", "100" ], "complete_print_exhaust_fan_speed": [ - "100", "100" ], "during_print_exhaust_fan_speed": [ - "100", "100" ], + "enable_pressure_advance": [ + "0" + ], "filament_deretraction_speed": [ - "15", "15" ], "filament_flow_ratio": [ - "1.045", "1.045" ], "filament_multitool_ramming_flow": [ - "5", "5" ], "filament_retract_length_toolchange": [ - "2", "2" ], "filament_retraction_length": [ - "1.2", "1.2" ], "filament_retraction_speed": [ - "15", "15" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "230", + "230" + ], + "nozzle_temperature_initial_layer": [ "230" ], "slow_down_layer_time": [ "14" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ @@ -99,38 +88,30 @@ "30" ], "fan_max_speed": [ - "100", "100" ], "fan_min_speed": [ - "100", "100" ], "filament_cost": [ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -155,14 +136,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json index e5dd59dad2..59b125ff72 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1.json @@ -1,38 +1,34 @@ { "type": "filament", "name": "Snapmaker TPU 95A @U1", - "renamed_from": "Snapmaker TPU 95A U1;Snapmaker TPU 95A @U1 0.4 High Flow nozzle;Snapmaker TPU 95A U1 0.4 High Flow nozzle", "inherits": "Snapmaker TPU 95A @U1 base", "from": "system", "setting_id": "XdvEzjOGtQKamDRC", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "activate_air_filtration": [ - "0", "0" ], "activate_chamber_temp_control": [ "0" ], "adaptive_pressure_advance": [ - "0", "0" ], "adaptive_pressure_advance_bridges": [ - "0", "0" ], "adaptive_pressure_advance_model": [ - "0,0,0\n0,0,0", "0,0,0\n0,0,0" ], "adaptive_pressure_advance_overhangs": [ - "0", "0" ], + "additional_cooling_fan_speed": [ + "70" + ], "chamber_temperature": [ "0" ], @@ -43,7 +39,6 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "80", "80" ], "cool_plate_temp": [ @@ -56,14 +51,12 @@ "0" ], "during_print_exhaust_fan_speed": [ - "60", "60" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "0", "0" ], "eng_plate_temp": [ @@ -76,11 +69,9 @@ "100" ], "fan_max_speed": [ - "70", "70" ], "fan_min_speed": [ - "70", "70" ], "filament_cooling_final_speed": [ @@ -99,7 +90,6 @@ "1.24" ], "filament_deretraction_speed": [ - "8", "8" ], "filament_diameter": [ @@ -108,6 +98,9 @@ "filament_end_gcode": [ "; filament end gcode \n" ], + "filament_flow_ratio": [ + "1" + ], "filament_is_support": [ "0" ], @@ -118,53 +111,57 @@ "3" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "3.2", "3.2" ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], "filament_multitool_ramming": [ - "0", "0" ], "filament_multitool_ramming_flow": [ - "10", "10" ], "filament_multitool_ramming_volume": [ - "10", "10" ], "filament_notes": [ - "High-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from local standard fallback preset Snapmaker TPU 95A @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "" ], "filament_ramming_parameters": [ "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ], + "filament_retract_before_wipe": [ + "nil" + ], "filament_retract_lift_above": [ - "nil", "nil" ], "filament_retract_lift_below": [ - "nil", "nil" ], "filament_retract_lift_enforce": [ - "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_retraction_length": [ - "1.4", "1.4" ], + "filament_retraction_minimum_travel": [ + "nil" + ], "filament_retraction_speed": [ - "30", "30" ], "filament_shrink": [ @@ -200,12 +197,16 @@ "filament_vendor": [ "Snapmaker" ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], "filament_z_hop": [ - "0.4", "0.4" ], "filament_z_hop_types": [ - "Auto Lift", "Auto Lift" ], "full_fan_speed_layer": [ @@ -221,13 +222,17 @@ "0" ], "nozzle_temperature": [ - "225", "225" ], "nozzle_temperature_initial_layer": [ - "225", "225" ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "200" + ], "overhang_fan_speed": [ "100" ], @@ -238,7 +243,6 @@ "0.4157" ], "pressure_advance": [ - "0.02", "0.02" ], "reduce_fan_stop_start_freq": [ @@ -276,9 +280,5 @@ ], "default_filament_colour": [ "" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json index 8fdda2dc94..b9619dcca5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Snapmaker TPU 95A HF @U1 0.6 nozzle", - "renamed_from": "Snapmaker TPU 95A HF U1 0.6 nozzle;Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle;Snapmaker TPU 95A HF U1 0.6 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "Q2svXpkEqg0dCdq3", "filament_id": "OFXSvqOX", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -18,90 +16,75 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], + "enable_pressure_advance": [ + "0" + ], "fan_cooling_layer_time": [ "100" ], "fan_max_speed": [ - "100", "100" ], "fan_min_speed": [ - "100", "100" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1.067", "1.067" ], "filament_max_volumetric_speed": [ - "12", "12" ], "filament_multitool_ramming_flow": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "8", "8" ], "filament_retraction_length": [ - "0.8", "0.8" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "215", "215" ], "nozzle_temperature_initial_layer": [ - "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ - "0.14", "0.14" ], "slow_down_layer_time": [ "8" ], "additional_cooling_fan_speed": [ - "100", "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -111,7 +94,6 @@ "30" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -124,23 +106,18 @@ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -165,14 +142,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json index f677f2111f..4283ac2651 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Snapmaker TPU 95A HF @U1 0.8 nozzle", - "renamed_from": "Snapmaker TPU 95A HF U1 0.8 nozzle;Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle;Snapmaker TPU 95A HF U1 0.8 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "RjsE08h3l37cAkAs", "filament_id": "OFXSvqOX", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -18,90 +16,75 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], + "enable_pressure_advance": [ + "0" + ], "fan_cooling_layer_time": [ "100" ], "fan_max_speed": [ - "100", "100" ], "fan_min_speed": [ - "100", "100" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1.045", "1.045" ], "filament_max_volumetric_speed": [ - "16", "16" ], "filament_multitool_ramming_flow": [ - "15", "15" ], "filament_retract_length_toolchange": [ - "8", "8" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "215", "215" ], "nozzle_temperature_initial_layer": [ - "215", "215" ], "overhang_fan_threshold": [ "95%" ], "pressure_advance": [ - "0.12", "0.12" ], "slow_down_layer_time": [ "12" ], "additional_cooling_fan_speed": [ - "100", "100" ], "filament_z_hop_types": [ - "Slope Lift", "Slope Lift" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -111,7 +94,6 @@ "30" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -124,23 +106,18 @@ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -165,14 +142,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json index f609cd0b50..816b78ceb8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json @@ -1,15 +1,13 @@ { "type": "filament", "name": "Snapmaker TPU 95A HF @U1", - "renamed_from": "Snapmaker TPU 95A HF U1;Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle;Snapmaker TPU 95A HF U1 0.4 High Flow nozzle", "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "KwcwmV2UmZUgCBoz", "filament_id": "OFXSvqOX", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "filament_start_gcode": [ "; filament start gcode\n" @@ -18,78 +16,69 @@ "; filament end gcode \n\n" ], "filament_multitool_ramming": [ - "1", "1" ], "filament_multitool_ramming_volume": [ - "0.1", "0.1" ], + "enable_pressure_advance": [ + "0" + ], "fan_cooling_layer_time": [ "40" ], "fan_max_speed": [ - "50", "50" ], "fan_min_speed": [ - "10", "10" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_flow_ratio": [ - "1.067", "1.067" ], "filament_max_volumetric_speed": [ - "9", "9" ], "filament_multitool_ramming_flow": [ - "10", "10" ], "filament_retract_length_toolchange": [ - "6", "6" ], "filament_retraction_length": [ - "1", "1" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_vendor": [ "Snapmaker" ], "nozzle_temperature": [ - "230", + "230" + ], + "nozzle_temperature_initial_layer": [ "230" ], "overhang_fan_threshold": [ "25%" ], "pressure_advance": [ - "0.23", "0.23" ], "slow_down_layer_time": [ "10" ], "activate_air_filtration": [ - "0", "0" ], "chamber_temperatures": [ "0" ], "complete_print_exhaust_fan_speed": [ - "70", "70" ], "cool_plate_temp": [ @@ -99,7 +88,6 @@ "30" ], "during_print_exhaust_fan_speed": [ - "70", "70" ], "eng_plate_temp": [ @@ -112,27 +100,21 @@ "20" ], "filament_long_retractions_when_cut": [ - "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ - "15", "15" ], "filament_retract_when_changing_layer": [ - "nil", "nil" ], "filament_retraction_distances_when_cut": [ - "nil", "nil" ], "filament_z_hop": [ - "nil", "nil" ], "filament_z_hop_types": [ - "nil", "nil" ], "hot_plate_temp": [ @@ -157,14 +139,6 @@ "35" ], "nozzle_temperature_range_low": [ - "200", "200" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json index 7a62ae80ec..ba393bed17 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1.json @@ -1,7 +1,6 @@ { "type": "filament", "name": "Snapmaker TPU @U1", - "renamed_from": "Snapmaker TPU U1;Snapmaker TPU @U1 0.4 High Flow nozzle;Snapmaker TPU U1 0.4 High Flow nozzle;Snapmaker TPU @U1 0.6 High Flow nozzle;Snapmaker TPU U1 0.6 High Flow nozzle;Snapmaker TPU @U1 0.8 High Flow nozzle;Snapmaker TPU U1 0.8 High Flow nozzle", "inherits": "Snapmaker TPU @U1 base", "from": "system", "setting_id": "QLO4hkw6Agd3gSyR", @@ -9,20 +8,6 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)", "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSunlu TPU 95A\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_max_volumetric_speed": [ - "2.8", - "10.5" + "Snapmaker U1 (0.8 nozzle)" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json index 6dce65a512..0aca011924 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU High-Flow @U1.json @@ -1,7 +1,6 @@ { "type": "filament", "name": "Snapmaker TPU High-Flow @U1", - "renamed_from": "Snapmaker TPU High-Flow U1;Snapmaker TPU High-Flow @U1 0.4 High Flow nozzle;Snapmaker TPU High-Flow U1 0.4 High Flow nozzle;Snapmaker TPU High-Flow @U1 0.6 High Flow nozzle;Snapmaker TPU High-Flow U1 0.6 High Flow nozzle;Snapmaker TPU High-Flow @U1 0.8 High Flow nozzle;Snapmaker TPU High-Flow U1 0.8 High Flow nozzle", "inherits": "Snapmaker TPU @U1 base", "from": "system", "setting_id": "5AXIg8WCdcd74S5v", @@ -10,36 +9,24 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)", "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filament_flow_ratio": [ - "0.983", "0.983" ], "filament_deretraction_speed": [ - "nil", "nil" ], "filament_max_volumetric_speed": [ - "7.6", "7.6" ], "filament_retraction_length": [ - "0.8", "0.8" ], "filament_retraction_speed": [ - "nil", "nil" ], "filament_notes": [ - "Standard nozzle: !! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n\n\nHigh-flow nozzle: Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.6 mm^3/s, from local standard fallback preset Snapmaker TPU High-Flow @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" + "!! It needs to be dried before use.\nSnapmaker TPU 95A High-Flow\n" ] } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json deleted file mode 100644 index 042df8f861..0000000000 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 High Flow nozzle).json +++ /dev/null @@ -1,49 +0,0 @@ -{ - "type": "machine", - "name": "Snapmaker U1 (0.2 High Flow nozzle)", - "inherits": "Snapmaker U1 (0.2 nozzle)", - "from": "system", - "setting_id": "rypfKOLmPmXpR3Z9", - "instantiation": "true", - "printer_model": "Snapmaker U1", - "printer_variant": "0.2 High Flow", - "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.2 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle" - ], - "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n", - "extruder_type": [ - "Direct Drive", - "Direct Drive", - "Direct Drive", - "Direct Drive" - ], - "extruder_variant_list": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "printer_extruder_id": [ - "1", - "2", - "3", - "4" - ], - "printer_extruder_variant": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "default_nozzle_volume_type": [ - "High Flow", - "High Flow", - "High Flow", - "High Flow" - ] -} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 6e2939134e..674b82930c 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -34,7 +34,7 @@ "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ "3", "0.4", @@ -65,7 +65,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.14", @@ -215,11 +215,5 @@ "143" ], "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", - "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.2 nozzle" - ] + "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json deleted file mode 100644 index 1a8c1a0448..0000000000 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 High Flow nozzle).json +++ /dev/null @@ -1,49 +0,0 @@ -{ - "type": "machine", - "name": "Snapmaker U1 (0.4 High Flow nozzle)", - "inherits": "Snapmaker U1 (0.4 nozzle)", - "from": "system", - "setting_id": "YVXcn9a2pyGfl8wo", - "instantiation": "true", - "printer_model": "Snapmaker U1", - "printer_variant": "0.4 High Flow", - "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.4 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1" - ], - "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n", - "extruder_type": [ - "Direct Drive", - "Direct Drive", - "Direct Drive", - "Direct Drive" - ], - "extruder_variant_list": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "printer_extruder_id": [ - "1", - "2", - "3", - "4" - ], - "printer_extruder_variant": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "default_nozzle_volume_type": [ - "High Flow", - "High Flow", - "High Flow", - "High Flow" - ] -} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index a1dcbf2029..3acd21c2dd 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -34,7 +34,7 @@ "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ "3", "0.4", @@ -65,7 +65,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.32", @@ -218,11 +218,5 @@ ], "resonance_avoidance": "1", "min_resonance_avoidance_speed": "40", - "max_resonance_avoidance_speed": "90", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1", - "Snapmaker PLA SnapSpeed @U1" - ] + "max_resonance_avoidance_speed": "90" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json index e9d28a5761..cc4e7a0515 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json @@ -31,11 +31,5 @@ "stainless_steel", "stainless_steel", "stainless_steel" - ], - "default_filament_profile": [ - "Generic PLA @System", - "Generic PLA @System", - "Generic PLA @System", - "Generic PLA @System" ] } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json deleted file mode 100644 index 07d651e5c4..0000000000 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 High Flow nozzle).json +++ /dev/null @@ -1,49 +0,0 @@ -{ - "type": "machine", - "name": "Snapmaker U1 (0.6 High Flow nozzle)", - "inherits": "Snapmaker U1 (0.6 nozzle)", - "from": "system", - "setting_id": "7Nqiw8MQIWaQqB1R", - "instantiation": "true", - "printer_model": "Snapmaker U1", - "printer_variant": "0.6 High Flow", - "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.6 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle" - ], - "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n", - "extruder_type": [ - "Direct Drive", - "Direct Drive", - "Direct Drive", - "Direct Drive" - ], - "extruder_variant_list": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "printer_extruder_id": [ - "1", - "2", - "3", - "4" - ], - "printer_extruder_variant": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "default_nozzle_volume_type": [ - "High Flow", - "High Flow", - "High Flow", - "High Flow" - ] -} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index b26043aa7b..98b6f7e683 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -34,7 +34,7 @@ "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ "3", "0.4", @@ -65,7 +65,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.42", @@ -215,11 +215,5 @@ "143", "143" ], - "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.6 nozzle" - ] + "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json deleted file mode 100644 index 6730524bc1..0000000000 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 High Flow nozzle).json +++ /dev/null @@ -1,49 +0,0 @@ -{ - "type": "machine", - "name": "Snapmaker U1 (0.8 High Flow nozzle)", - "inherits": "Snapmaker U1 (0.8 nozzle)", - "from": "system", - "setting_id": "aTs5dXyBbXItUEeS", - "instantiation": "true", - "printer_model": "Snapmaker U1", - "printer_variant": "0.8 High Flow", - "printer_notes": "High-flow nozzle preset for all four U1 tools. Uses the existing 0.8 mm geometry, motion limits and G-code. Matching High Flow filament presets use the source-specific volumetric speed ceilings documented in their filament notes. Calibrate for your nozzle and filament.", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle" - ], - "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"high_flow,\"), /,$/, \"\")}\n", - "extruder_type": [ - "Direct Drive", - "Direct Drive", - "Direct Drive", - "Direct Drive" - ], - "extruder_variant_list": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "printer_extruder_id": [ - "1", - "2", - "3", - "4" - ], - "printer_extruder_variant": [ - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow", - "Direct Drive High Flow" - ], - "default_nozzle_volume_type": [ - "High Flow", - "High Flow", - "High Flow", - "High Flow" - ] -} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index 3934dc73f8..6ab566e0aa 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -34,7 +34,7 @@ "0", "0" ], - "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n\n; U1 nozzle flow metadata, one value per logical filament\n; filament_volume_type = {regex_replace(regex_replace(zdigits(0, size(filament_type)), /0/, \"standard,\"), /,$/, \"\")}\n", + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ "3", "0.4", @@ -65,7 +65,7 @@ "20", "12" ], - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.56", @@ -215,11 +215,5 @@ "143", "143" ], - "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", - "default_filament_profile": [ - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", - "Snapmaker PLA SnapSpeed @U1 0.8 nozzle" - ] + "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json index 3fa02cde23..96eb53f81a 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json @@ -5,8 +5,8 @@ "family": "Snapmaker", "url": "", "model_id": "797581801", - "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle;Snapmaker PLA SnapSpeed @U1", + "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle", "bed_model": "Snapmaker U1_bed.stl", "bed_texture": "Snapmaker U1_texture.svg", - "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8;0.2 High Flow;0.4 High Flow;0.6 High Flow;0.8 High Flow" + "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8" } diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json index bec96fc2c1..0b3d89a303 100644 --- a/resources/profiles/Snapmaker/machine/fdm_U1.json +++ b/resources/profiles/Snapmaker/machine/fdm_U1.json @@ -12,150 +12,174 @@ "0.32", "0.32", "0.32", + "0.32", "0.32" ], "min_layer_height": [ "0.08", "0.08", "0.08", + "0.08", "0.08" ], "deretraction_speed": [ "30", "30", "30", + "30", "30" ], "extruder_colour": [ "#FCE94F", "#FCE94F", "#FCE94F", + "#FCE94F", "#FCE94F" ], "extruder_offset": [ "0x0", "0x0", "0x0", + "0x0", "0x0" ], "long_retractions_when_cut": [ "0", "0", "0", + "0", "0" ], "nozzle_diameter": [ "0.4", "0.4", "0.4", + "0.4", "0.4" ], "retract_before_wipe": [ "70%", "70%", "70%", + "70%", "70%" ], "retract_length_toolchange": [ "2", "2", "2", + "2", "2" ], "retract_lift_above": [ "0", "0", "0", + "0", "0" ], "retract_lift_below": [ "0", "0", "0", + "0", "0" ], "retract_lift_enforce": [ "All Surfaces", "All Surfaces", "All Surfaces", + "All Surfaces", "All Surfaces" ], "retract_restart_extra": [ "0", "0", "0", + "0", "0" ], "retract_restart_extra_toolchange": [ "0", "0", "0", + "0", "0" ], "retract_when_changing_layer": [ "1", "1", "1", + "1", "1" ], "retraction_distances_when_cut": [ "18", "18", "18", + "18", "18" ], "retraction_length": [ "0.8", "0.8", "0.8", + "0.8", "0.8" ], "retraction_minimum_travel": [ "1", "1", "1", + "1", "1" ], "retraction_speed": [ "30", "30", "30", + "30", "30" ], "travel_slope": [ "3", "3", "3", + "3", "3" ], "wipe": [ "1", "1", "1", + "1", "1" ], "wipe_distance": [ "1", "1", "1", + "1", "1" ], "z_hop": [ "0.4", "0.4", "0.4", + "0.4", "0.4" ], "z_hop_types": [ "Normal Lift", "Normal Lift", "Normal Lift", + "Normal Lift", "Normal Lift" ], "purge_in_prime_tower": "0", "machine_pause_gcode": "M601", "change_filament_gcode": "", - "machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\n; Select purifier mode from the softening temperatures of used filaments.\n{if min_vitrification_temperature>70}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=600\n{elsif min_vitrification_temperature<=50}\nSET_PURIFIER_MODE MODE=1 DESIRE_TEMP=42 ALARM_TEMP=45 FAN_SPEED=0.6 DELAY_OFF=0\n{else}\nSET_PURIFIER_MODE MODE=3 DESIRE_TEMP=0 FAN_SPEED=0.6 DELAY_OFF=600\n{endif}\n\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n", + "machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n", "scan_first_layer": "0", "nozzle_type": "undefine", "auxiliary_fan": "0", diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 73cee4710b..15546ce4bb 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,47 +1,18 @@ { "type": "process", "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.06 High Quality Snapmaker U1 (0.2 nozzle);0.06 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.06 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.06_nozzle_0.2", "from": "system", "setting_id": "3SCofR6VrVyo3vJp", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], + "default_acceleration": "4000", "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -49,69 +20,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "13.5", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 98f28fe3d5..3881460bda 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.06 Standard Snapmaker U1 (0.2 nozzle);0.06 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.06 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.06_nozzle_0.2", "from": "system", "setting_id": "997RaiNHd2YhpaRB", @@ -9,8 +8,7 @@ "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -18,79 +16,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "13.5", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index 8f8d3aa158..0a3ba43c86 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -1,98 +1,28 @@ { "type": "process", "name": "0.08 Extra Fine @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.08 Extra Fine Snapmaker U1 (0.4 nozzle);0.08 Extra Fine @Snapmaker U1 (0.4 High Flow nozzle);0.08 Extra Fine Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.08", "from": "system", "setting_id": "Tayg0K1WRyJMLoke", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", "wipe_tower_extra_spacing": "120%", "enable_arc_fitting": "0", - "outer_wall_speed": [ - "100", - "500", - "100", - "500", - "100", - "500", - "100", - "500" - ], + "outer_wall_speed": "100", "precise_outer_wall": "1", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "450", - "600", - "450", - "600", - "450", - "600", - "450", - "600" - ], - "inner_wall_speed": [ - "350", - "600", - "350", - "600", - "350", - "600", - "350", - "600" - ], - "internal_solid_infill_speed": [ - "350", - "600", - "350", - "600", - "350", - "600", - "350", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index 1ae8b8aba2..2aeb309d58 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,47 +1,18 @@ { "type": "process", "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.08 High Quality Snapmaker U1 (0.2 nozzle);0.08 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.08_nozzle_0.2", "from": "system", "setting_id": "6ExpMU3Wq4J1R7wy", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], + "default_acceleration": "4000", "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -49,69 +20,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index 6ba52ed409..107731b2cb 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,110 +1,27 @@ { "type": "process", "name": "0.08 High Quality @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.08 High Quality Snapmaker U1 (0.4 nozzle);0.08 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.08 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.08", "from": "system", "setting_id": "Bld9ulv0wFza7OCb", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], - "gap_infill_speed": [ - "210", - "210", - "210", - "210", - "210", - "210", - "210", - "210" - ], - "inner_wall_speed": [ - "120", - "600", - "120", - "600", - "120", - "600", - "120", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "default_acceleration": "4000", + "gap_infill_speed": "210", + "inner_wall_speed": "120", + "internal_solid_infill_speed": "150", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150", - "150", - "150", - "150" - ], + "sparse_infill_speed": "150", + "top_surface_speed": "150", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -115,25 +32,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index 0d17be8403..ea8c719085 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.08 Standard Snapmaker U1 (0.2 nozzle);0.08 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.08 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.08_nozzle_0.2", "from": "system", "setting_id": "loFrCYH9ux2L5JpZ", @@ -9,8 +8,7 @@ "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -18,79 +16,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "18", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index d4b6f44745..6fc26cd55f 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,47 +1,18 @@ { "type": "process", "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.10 High Quality Snapmaker U1 (0.2 nozzle);0.10 High Quality @Snapmaker U1 (0.2 High Flow nozzle);0.10 High Quality Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.10_nozzle_0.2", "from": "system", "setting_id": "BfLpmnJnSBYBFInR", "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], + "default_acceleration": "4000", "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -49,69 +20,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "28", "prime_volume": "25", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index e6486cee9b..d33ce1c083 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.10 Standard Snapmaker U1 (0.2 nozzle);0.10 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.10 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.10_nozzle_0.2", "from": "system", "setting_id": "SOq962UWv1ml1Mk0", @@ -9,8 +8,7 @@ "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -25,74 +23,5 @@ "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", "wipe_tower_wall_type": "rib", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "slowdown_for_curled_perimeters": "0" } diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index f72b90e84b..6de6d483da 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -1,27 +1,16 @@ { "type": "process", "name": "0.12 Fine @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.12 Fine Snapmaker U1 (0.4 nozzle);0.12 Fine @Snapmaker U1 (0.4 High Flow nozzle);0.12 Fine Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.12", "from": "system", "setting_id": "xBU1j8ldOefYfosp", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -35,65 +24,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "430", - "600", - "430", - "600", - "430", - "600", - "430", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "350", - "600", - "350", - "600", - "350", - "600", - "350", - "600" - ], - "internal_solid_infill_speed": [ - "350", - "600", - "350", - "600", - "350", - "600", - "350", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index d4a347bc1f..a5f215d7f3 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,109 +1,26 @@ { "type": "process", "name": "0.12 High Quality @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.12 High Quality Snapmaker U1 (0.4 nozzle);0.12 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.12 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.12", "from": "system", "setting_id": "WNWFsx5DJtCRAlFl", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], - "gap_infill_speed": [ - "230", - "230", - "230", - "230", - "230", - "230", - "230", - "230" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "180", - "600", - "180", - "600", - "180", - "600", - "180", - "600" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "default_acceleration": "4000", + "gap_infill_speed": "230", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "180", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "180", - "600", - "180", - "600", - "180", - "600", - "180", - "600" - ], - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150", - "150", - "150", - "150" - ], + "sparse_infill_speed": "180", + "top_surface_speed": "150", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "prime_tower_width": "30", "prime_volume": "27", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", @@ -116,25 +33,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index c1108faea3..632d9614f7 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.12 Standard Snapmaker U1 (0.2 nozzle);0.12 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.12 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.12_nozzle_0.2", "from": "system", "setting_id": "KHC1zpxpuvaUEzvf", @@ -9,8 +8,7 @@ "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -18,79 +16,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "28", "prime_volume": "27", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index 5735194c70..0de823db1f 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", - "renamed_from": "0.14 Standard Snapmaker U1 (0.2 nozzle);0.14 Standard @Snapmaker U1 (0.2 High Flow nozzle);0.14 Standard Snapmaker U1 (0.2 High Flow nozzle)", "inherits": "fdm_process_U1_0.14_nozzle_0.2", "from": "system", "setting_id": "NGJoV0n6T510y9wM", @@ -9,8 +8,7 @@ "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)", - "Snapmaker U1 (0.2 High Flow nozzle)" + "Snapmaker U1 (0.2 nozzle)" ], "enable_arc_fitting": "0", "ooze_prevention": "1", @@ -18,79 +16,10 @@ "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "32", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index 5126a45f91..1306485d6f 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,110 +1,27 @@ { "type": "process", "name": "0.16 High Quality @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.16 High Quality Snapmaker U1 (0.4 nozzle);0.16 High Quality @Snapmaker U1 (0.4 High Flow nozzle);0.16 High Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.16", "from": "system", "setting_id": "Ofe17WrGQ3MOrqNe", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000", - "4000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250", - "250", - "250", - "250", - "250" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "default_acceleration": "4000", + "gap_infill_speed": "250", + "inner_wall_speed": "150", + "internal_solid_infill_speed": "200", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150", - "150", - "150", - "150" - ], + "sparse_infill_speed": "200", + "top_surface_speed": "150", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "36", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -116,25 +33,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index c5f4c492da..838f250e8c 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -1,29 +1,18 @@ { "type": "process", "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.16 Optimal Snapmaker U1 (0.4 nozzle);0.16 Optimal @Snapmaker U1 (0.4 High Flow nozzle);0.16 Optimal Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.16", "from": "system", "setting_id": "ERcgRLp5bQo1hgz8", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "36", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -34,65 +23,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "330", - "600", - "330", - "600", - "330", - "600", - "330", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index c9a5216347..88fbb33812 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.18 Standard Snapmaker U1 (0.6 nozzle);0.18 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.18 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.18_nozzle_0.6", "from": "system", "setting_id": "XGSrVgnsUFv6uCRs", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "layer_height": "0.25", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -35,76 +24,7 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json index 701b719713..be894aa221 100644 --- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json @@ -1,92 +1,21 @@ { "type": "process", "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.20 Quality Snapmaker U1 (0.4 nozzle);0.20 Quality @Snapmaker U1 (0.4 High Flow nozzle);0.20 Quality Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "BBXxXQCXCme2Mvy0", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", "wipe_tower_cone_angle": "15", "prime_tower_brim_width": "5", - "initial_layer_print_height": "0.25", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "270", - "600", - "270", - "600", - "270", - "600", - "270", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ] + "initial_layer_print_height": "0.25" } diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 75b4c935d5..443afe55dd 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -1,93 +1,22 @@ { "type": "process", "name": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.20 Standard Snapmaker U1 (0.4 nozzle);0.20 Standard @Snapmaker U1 (0.4 High Flow nozzle);0.20 Standard Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "XR5r9SuWmSag5Qjo", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "45", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", "wipe_tower_cone_angle": "15", "prime_tower_brim_width": "5", - "initial_layer_print_height": "0.25", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "270", - "600", - "270", - "600", - "270", - "600", - "270", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ] + "initial_layer_print_height": "0.25" } diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json index 8dcbb68fa5..5c87ff68d0 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.20 Standard Snapmaker U1 (0.6 nozzle);0.20 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.20 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "6VM4QhgvHUmyf2um", @@ -9,21 +8,11 @@ "description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.", "layer_height": "0.20", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -31,65 +20,5 @@ "prime_tower_brim_width": "5", "initial_layer_print_height": "0.25", "top_shell_layers": "4", - "bottom_shell_layers": "3", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "bottom_shell_layers": "3" } diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index 157333ffad..1d051fc801 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -1,41 +1,21 @@ { "type": "process", "name": "0.20 Strength @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.20 Strength Snapmaker U1 (0.4 nozzle);0.20 Strength @Snapmaker U1 (0.4 High Flow nozzle);0.20 Strength Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "bYnMOZxTq83EwIyd", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "outer_wall_speed": [ - "60", - "500", - "60", - "500", - "60", - "500", - "60", - "500" - ], + "outer_wall_speed": "60", "sparse_infill_density": "25%", "wall_loops": "6", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "45", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -46,55 +26,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "270", - "600", - "270", - "600", - "270", - "600", - "270", - "600" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json index 5e031b3517..577065ca3f 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json @@ -1,29 +1,18 @@ { "type": "process", "name": "0.20 Support @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.20 Support Snapmaker U1 (0.4 nozzle);0.20 Support @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "4whjHJVCN44w8SPE", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "40", "prime_volume": "15", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -32,65 +21,5 @@ "enable_support": "1", "initial_layer_print_height": "0.25", "support_interface_spacing": "0", - "support_interface_top_layers": "3", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "270", - "600", - "270", - "600", - "270", - "600", - "270", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ] + "support_interface_top_layers": "3" } diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json index 57a763a355..3d1887bea9 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.20 Support W @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.20 Support W Snapmaker U1 (0.4 nozzle);0.20 Support W @Snapmaker U1 (0.4 High Flow nozzle);0.20 Support W Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.20", "from": "system", "setting_id": "M9JhI2roLcP4jYks", @@ -11,85 +10,16 @@ "support_top_z_distance": "0.2", "support_interface_loop_pattern": "1", "support_interface_spacing": "0", + "support_interface_speed": "80", "support_filament": "0", "support_interface_filament": "0", "enable_prime_tower": "1", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "50", "prime_volume": "38", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], - "standby_temperature_delta": "-150", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "270", - "600", - "270", - "600", - "270", - "600", - "270", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "250", - "600", - "250", - "600" - ] + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150" } diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index b1ad97d537..8e09376daf 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -1,29 +1,18 @@ { "type": "process", "name": "0.24 Draft @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.24 Draft Snapmaker U1 (0.4 nozzle);0.24 Draft @Snapmaker U1 (0.4 High Flow nozzle);0.24 Draft Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.24", "from": "system", "setting_id": "MYRo7jTenu7F0Zv4", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "54", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", @@ -34,65 +23,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "230", - "600", - "230", - "600", - "230", - "600", - "230", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "230", - "600", - "230", - "600", - "230", - "600", - "230", - "600" - ], - "internal_solid_infill_speed": [ - "230", - "600", - "230", - "600", - "230", - "600", - "230", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index 8aae7fa25c..2fa2eeabdb 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.24 Standard Snapmaker U1 (0.6 nozzle);0.24 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.24 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.24_nozzle_0.6", "from": "system", "setting_id": "BziJYuA5U5gWm6FM", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "55", @@ -34,77 +23,8 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index 1c08f23f8e..316bb0dbee 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", - "renamed_from": "0.24 Standard Snapmaker U1 (0.8 nozzle);0.24 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.24 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.24_nozzle_0.8", "from": "system", "setting_id": "QcJ5p9h0eYUb91ak", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "min_width_top_surface": "90", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -35,76 +24,7 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json index f5c9737efd..2dcf03d540 100644 --- a/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.25 Benchy @Snapmaker U1 (0.4 nozzle).json @@ -1,144 +1,35 @@ { "type": "process", "name": "0.25 Benchy @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.25 Benchy Snapmaker U1 (0.4 nozzle);0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle);0.25 Benchy Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1", "from": "system", "setting_id": "deA4Xg6QxFTKOYZy", "instantiation": "true", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "elefant_foot_compensation": "0.15", "top_shell_layers": "3", "top_shell_thickness": "0.5", - "initial_layer_speed": [ - "100", - "100", - "100", - "100", - "100", - "100", - "100", - "100" - ], - "initial_layer_infill_speed": [ - "180", - "180", - "180", - "180", - "180", - "180", - "180", - "180" - ], - "outer_wall_speed": [ - "180", - "500", - "180", - "500", - "180", - "500", - "180", - "500" - ], - "inner_wall_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "sparse_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "internal_solid_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "top_surface_speed": [ - "180", - "180", - "180", - "180", - "180", - "180", - "180", - "180" - ], - "gap_infill_speed": [ - "200", - "200", - "200", - "200", - "200", - "200", - "200", - "200" - ], + "initial_layer_speed": "100", + "initial_layer_infill_speed": "180", + "outer_wall_speed": "180", + "inner_wall_speed": "200", + "sparse_infill_speed": "200", + "internal_solid_infill_speed": "200", + "top_surface_speed": "180", + "gap_infill_speed": "200", "ironing_speed": "30", - "enable_overhang_speed": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], - "overhang_1_4_speed": [ - "180", - "180", - "180", - "180", - "180", - "180", - "180", - "180" - ], - "overhang_2_4_speed": [ - "20", - "20", - "20", - "20", - "20", - "20", - "20", - "20" - ], - "overhang_3_4_speed": [ - "10", - "10", - "10", - "10", - "10", - "10", - "10", - "10" - ], + "enable_overhang_speed": "0", + "overhang_1_4_speed": "180", + "overhang_2_4_speed": "20", + "overhang_3_4_speed": "10", "layer_height": "0.25", "initial_layer_print_height": "0.25", "detect_overhang_wall": "0", "reduce_crossing_wall": "0", "ensure_vertical_shell_thickness": "none", + "filename_format": "testBenchy_{print_time}.gcode", "sparse_infill_density": "10%", "sparse_infill_pattern": "alignedrectilinear", "wall_generator": "classic", @@ -155,134 +46,15 @@ "sparse_infill_line_width": "0.5", "top_surface_line_width": "0.5", "bottom_shell_layers": "2", - "initial_layer_travel_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], - "bridge_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "bridge_speed": [ - "100", - "100", - "100", - "100", - "100", - "100", - "100", - "100" - ], - "default_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "inner_wall_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "internal_solid_infill_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "outer_wall_acceleration": [ - "1600", - "1600", - "1600", - "1600", - "1600", - "1600", - "1600", - "1600" - ], - "small_perimeter_speed": [ - "200", - "200", - "200", - "200", - "200", - "200", - "200", - "200" - ], - "sparse_infill_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "top_surface_acceleration": [ - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000", - "3000" - ], - "initial_layer_acceleration": [ - "1600", - "1600", - "1600", - "1600", - "1600", - "1600", - "1600", - "1600" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "initial_layer_travel_speed": "100%", + "bridge_acceleration": "3000", + "bridge_speed": "100", + "default_acceleration": "3000", + "inner_wall_acceleration": "3000", + "internal_solid_infill_acceleration": "3000", + "outer_wall_acceleration": "1600", + "small_perimeter_speed": "200", + "sparse_infill_acceleration": "3000", + "top_surface_acceleration": "3000", + "initial_layer_acceleration": "1600" } diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 3b2e7f8746..8829efafdb 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -1,28 +1,17 @@ { "type": "process", "name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)", - "renamed_from": "0.28 Extra Draft Snapmaker U1 (0.4 nozzle);0.28 Extra Draft @Snapmaker U1 (0.4 High Flow nozzle);0.28 Extra Draft Snapmaker U1 (0.4 High Flow nozzle)", "inherits": "fdm_process_U1_0.28", "from": "system", "setting_id": "0fSeyAIS6z75A1r3", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)", - "Snapmaker U1 (0.4 High Flow nozzle)" + "Snapmaker U1 (0.4 nozzle)" ], "prime_tower_width": "30", "prime_volume": "63", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "wipe_tower_filament": "0", "prime_tower_brim_width": "5", "wipe_tower_cone_angle": "15", @@ -34,65 +23,5 @@ "support_type": "tree(auto)", "wipe_tower_extra_rib_length": "8", "wipe_tower_wall_type": "rib", - "gap_fill_target": "topbottom", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "200", - "500", - "200", - "500" - ], - "inner_wall_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ], - "internal_solid_infill_speed": [ - "200", - "600", - "200", - "600", - "200", - "600", - "200", - "600" - ] + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json index 1ca162e67a..defbc6740b 100644 --- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.30 Draft @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.30 Draft Snapmaker U1 (0.6 nozzle);0.30 Draft @Snapmaker U1 (0.6 High Flow nozzle);0.30 Draft Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "Tk3tG3RGJ8dwXFKf", @@ -9,22 +8,12 @@ "description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.", "layer_height": "0.30", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "68", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -33,64 +22,8 @@ "initial_layer_print_height": "0.30", "top_shell_layers": "3", "bottom_shell_layers": "3", - "outer_wall_speed": [ - "220", - "500", - "220", - "500", - "220", - "500", - "220", - "500" - ], - "inner_wall_speed": [ - "330", - "600", - "330", - "600", - "330", - "600", - "330", - "600" - ], - "sparse_infill_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "280", - "600", - "280", - "600", - "280", - "600", - "280", - "600" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "outer_wall_speed": "220", + "inner_wall_speed": "330", + "sparse_infill_speed": "300", + "internal_solid_infill_speed": "280" } diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index b84b343dcc..92bebf6219 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.30 Standard Snapmaker U1 (0.6 nozzle);0.30 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.30 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.30_nozzle_0.6", "from": "system", "setting_id": "TWxp6qgz1DJa8Ngo", @@ -9,21 +8,11 @@ "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "68", @@ -33,77 +22,8 @@ "wipe_tower_wall_type": "rib", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index 470490fb9f..f268a92446 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.30 Strength Snapmaker U1 (0.6 nozzle);0.30 Strength @Snapmaker U1 (0.6 High Flow nozzle);0.30 Strength Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.30_nozzle_0.6", "from": "system", "setting_id": "CBaL0vgwtgsd6Snj", @@ -11,21 +10,11 @@ "sparse_infill_density": "25%", "wall_loops": "4", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_width": "30", "prime_volume": "68", "seam_gap": "15%", @@ -35,77 +24,8 @@ "ooze_prevention": "1", "precise_outer_wall": "1", "prime_tower_brim_width": "5", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_type": "tree(auto)", - "wipe_tower_extra_spacing": "120%", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "wipe_tower_extra_spacing": "120%" } diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index 97ae45ed4e..de7559f827 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", - "renamed_from": "0.32 Standard Snapmaker U1 (0.8 nozzle);0.32 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.32 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.32_nozzle_0.8", "from": "system", "setting_id": "iVRz2B0VBIBL1xVd", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "72", @@ -36,77 +25,8 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index e964e08e5d..6dc9f26329 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.36 Standard Snapmaker U1 (0.6 nozzle);0.36 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.36 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.36_nozzle_0.6", "from": "system", "setting_id": "C0PiCFd3P222knX9", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "81", @@ -34,77 +23,8 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json index 51b76f6e33..b18e30c210 100644 --- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.40 Extra Draft Snapmaker U1 (0.6 nozzle);0.40 Extra Draft @Snapmaker U1 (0.6 High Flow nozzle);0.40 Extra Draft Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.6_common", "from": "system", "setting_id": "rAUffOThYmj9FVTw", @@ -9,22 +8,12 @@ "description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.", "layer_height": "0.40", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", "prime_tower_width": "30", "prime_volume": "90", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", "preheat_time": "30", @@ -33,65 +22,9 @@ "initial_layer_print_height": "0.35", "top_shell_layers": "3", "bottom_shell_layers": "3", - "outer_wall_speed": [ - "220", - "500", - "220", - "500", - "220", - "500", - "220", - "500" - ], - "inner_wall_speed": [ - "330", - "600", - "330", - "600", - "330", - "600", - "330", - "600" - ], - "sparse_infill_speed": [ - "320", - "600", - "320", - "600", - "320", - "600", - "320", - "600" - ], - "internal_solid_infill_speed": [ - "300", - "600", - "300", - "600", - "300", - "600", - "300", - "600" - ], - "wall_loops": "2", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ] + "outer_wall_speed": "220", + "inner_wall_speed": "330", + "sparse_infill_speed": "320", + "internal_solid_infill_speed": "300", + "wall_loops": "2" } diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index bf9f2644d6..b0cf935465 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", - "renamed_from": "0.40 Standard Snapmaker U1 (0.8 nozzle);0.40 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.40 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.40_nozzle_0.8", "from": "system", "setting_id": "VqkPgUtZi159BKpJ", @@ -9,21 +8,11 @@ "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "90", @@ -37,77 +26,8 @@ "min_width_top_surface": "200%", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "40", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index 4338dccaa8..eaa04faadc 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", - "renamed_from": "0.42 Standard Snapmaker U1 (0.6 nozzle);0.42 Standard @Snapmaker U1 (0.6 High Flow nozzle);0.42 Standard Snapmaker U1 (0.6 High Flow nozzle)", "inherits": "fdm_process_U1_0.42_nozzle_0.6", "from": "system", "setting_id": "SVJzhQA3KQetRZmo", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)", - "Snapmaker U1 (0.6 High Flow nozzle)" + "Snapmaker U1 (0.6 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "precise_z_height": "0", "prime_tower_brim_width": "5", "prime_tower_width": "30", @@ -34,77 +23,8 @@ "wipe_tower_wall_type": "rib", "enable_arc_fitting": "0", "ooze_prevention": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index 45b2d9431b..599cf24db5 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", - "renamed_from": "0.48 Standard Snapmaker U1 (0.8 nozzle);0.48 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.48 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.48_nozzle_0.8", "from": "system", "setting_id": "5H6JWChFEo3zqoHQ", @@ -9,21 +8,11 @@ "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", - "internal_bridge_speed": [ - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%", - "100%" - ], + "internal_bridge_speed": "100%", "prime_tower_brim_width": "5", "prime_tower_width": "30", "prime_volume": "108", @@ -34,77 +23,8 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index b2fb877e5f..ca728fe66a 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,7 +1,6 @@ { "type": "process", "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", - "renamed_from": "0.56 Standard Snapmaker U1 (0.8 nozzle);0.56 Standard @Snapmaker U1 (0.8 High Flow nozzle);0.56 Standard Snapmaker U1 (0.8 High Flow nozzle)", "inherits": "fdm_process_U1_0.56_nozzle_0.8", "from": "system", "setting_id": "JZEIXOUT33c7MrZj", @@ -9,8 +8,7 @@ "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)", - "Snapmaker U1 (0.8 High Flow nozzle)" + "Snapmaker U1 (0.8 nozzle)" ], "filter_out_gap_fill": "1", "gap_fill_target": "topbottom", @@ -24,77 +22,8 @@ "enable_arc_fitting": "0", "ooze_prevention": "1", "precise_outer_wall": "1", - "slowdown_for_curled_perimeters": [ - "0", - "0", - "0", - "0", - "0", - "0", - "0", - "0" - ], + "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "support_threshold_angle": "35", - "support_type": "tree(auto)", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "print_extruder_id": [ - "1", - "1", - "2", - "2", - "3", - "3", - "4", - "4" - ], - "sparse_infill_speed": [ - "100", - "600", - "100", - "600", - "100", - "600", - "100", - "600" - ], - "outer_wall_speed": [ - "120", - "500", - "120", - "500", - "120", - "500", - "120", - "500" - ], - "inner_wall_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ], - "internal_solid_infill_speed": [ - "150", - "600", - "150", - "600", - "150", - "600", - "150", - "600" - ] + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json index c05db3013a..4e0d7bf6e6 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json @@ -28,7 +28,7 @@ "interface_shells": "0", "detect_overhang_wall": "0", "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}_{filament_type[initial_no_support_extruder]}_{int(total_weight*10) / 10.0}g_{print_time}.gcode", + "filename_format": "{input_filename_base}.gcode", "wall_loops": "2", "inner_wall_line_width": "0.45", "inner_wall_speed": "40",